8,270 research outputs found
A novel nonlinear approach to suppress resonant vibrations
A novel approach to suppress resonant vibration is presented by employing a single degree of freedom transmissibility system which utilizes a nonlinear damping element. Studies have shown that the nonlinear damping element can reduce the output energy at the driving frequency and at the same time spread the output signal energy over a wider range of harmonics. It will also be shown that the reduction becomes larger as the nonlinear damping characteristic gets stronger and in most cases, the power at the harmonics in the output spectrum will be much less if the nonlinear damping characteristic is an odd function. Hence, an odd polynomial nonlinear damping element can be introduced between the incoming signal and the structure of interest to suppress resonant vibration. An expression is derived to express the transmitted force spectrum in terms of the nonlinear generalized frequency response functions, to clearly show how the energy, at the excitation frequency, is modified by the nonlinearity
Suppressing resonant vibrations using nonlinear springs and dampers
The energy entering the resonant region of a system can be significantly reduced by introducing designed nonlinearities into the system. The basic choice of the nonlinearity can be either a nonlinear spring element or a nonlinear damping element. A numerical algorithm to compute and compare the energy reduction produced by these two types of designed elements is proposed in this study. Analytical results are used to demonstrate the procedure. The numerical results indicate that the designed nonlinear damping element produces low levels of energy at the higher order harmonics and no bifurcations in the system output response. In contrast the nonlinear spring based designs induce significant energy at the harmonics and can produce bifurcation behaviour. The conclusions provide an important basis for the design of nonlinear materials and nonlinear engineering systems
Trends in social capital: Membership of associations in Great Britain, 1991–98
This Note uses the British Household Panel Study (BHPS) to consider the changing volume and distribution of voluntary association membership (and hence social capital) in Great Britain. We aim to supplement Hall's study of trends in social capital published in this Journal with more recent and longitudinal data. This allows us to show that whilst the volume of social capital is not declining, it is becoming increasingly class specific, and that its relative aggregate stability masks considerable turnover at the individual level. These findings are significant for current debates on social capital
Model structure detection and system identification of metal rubber devices
Metal rubber (MR) devices, a new wire mesh material, have been extensively used in recent years due to several unique properties especially in adverse environments. Although many practical studies have been completed, the related theoretical research on metal rubber is still in its infancy. In this paper, a semi-constitutive dynamic model that involves nonlinear elastic stiffness, nonlinear viscous damping and bilinear hysteresis Coulomb damping is adopted to model MR devices. After approximating the bilinear hysteresis damping using Chebyshev polynomials of the first kind, a very efficient procedure based on the orthogonal least squares (OLS) algorithm and the adjustable prediction error sum of squares (APRESS) criterion is proposed for model structure detection and parameter estimation of an MR device for the first time. The OLS algorithm provides a powerful tool to effectively select the significant model terms step by step, one at a time, by orthogonalizing the associated terms and maximizing the error reduction ratio, in a forward stepwise procedure. The APRESS statistic regularizes the OLS algorithm to facilitate the determination of the optimal number of model terms that should be included into the dynamic model. Because of the orthogonal property of the OLS algorithm, the approach leads to a parsimonious model. Numerical ill-conditioning problems confronted by the conventional least squares algorithm can also be avoided by the new approach. Finally by utilising the transient response of a MR specimen, it is shown how the model structure can be detected in a practical application. The identified model agrees with the experimental measurements very well
Velocity weakening and possibility of aftershocks in nanofriction experiments
We study the frictional behavior of small contacts as those realized in the
atomic force microscope and other experimental setups, in the framework of
generalized Prandtl-Tomlinson models. Particular attention is paid to
mechanisms that generate velocity weakening, namely a decreasing average
friction force with the relative sliding velocity.The mechanisms studied model
the possibility of viscous relaxation, or aging effects in the contact. It is
found that, in addition to producing velocity weakening, these mechanisms can
also produce aftershocks at sufficiently low sliding velocities. This provides
a remarkable analogy at the microscale, of friction properties at the
macroscale, where aftershocks and velocity weakening are two fundamental
features of seismic phenomena.Comment: 8 pages, 7 figure
Total antioxidant and ascorbic acid content of fresh fruits and vegetables : implications for dietary planning and food preservation
Department of Nursing and Health Sciences2001-2002 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
Dynamics of Phononic Dissipation at the Atomic Scale: Dependence on Internal Degrees of Freedom
Dynamics of dissipation of a local phonon distribution to the substrate is a
key issue in friction between sliding surfaces as well as in boundary
lubrication. We consider a model system consisting of an excited nano-particle
which is weakly coupled with a substrate. Using three different methods we
solve the dynamics of energy dissipation for different types of coupling
between the nano-particle and the substrate, where different types of
dimensionality and phonon densities of states were also considered for the
substrate. In this paper, we present our analysis of transient properties of
energy dissipation via phonon discharge in the microscopic level towards the
substrate. Our theoretical analysis can be extended to treat realistic
lubricant molecules or asperities, and also substrates with more complex
densities of states. We found that the decay rate of the nano-particle phonons
increases as the square of the interaction constant in the harmonic
approximation.Comment: 10 pages, 6 figures, submitted to Phys. Rev.
Ganoderma lucidum (‘Lingzhi’), a Chinese medicinal mushroom : biomarker responses in a controlled human supplementation study
Ageing & Health Group, School of Nursing2003-2004 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
Optical Conductivity in a Two-Band Superconductor: Pb
We demonstrate the effect of bandstructure on the superconducting properties
of Pb by calculating the strong-coupling features in the optical conductivity,
, due to the electron-phonon interaction. The importance of
momentum dependence in the calculation of the properties of superconductors has
previously been raised for MgB. Pb resembles MgB in that it is a two
band superconductor in which the bands' contributions to the Fermi surface have
very different topologies. We calculate by calculating a
memory function which has been recently used to analyze of
BiSrCaCuO. In our calculations the two components of
the Fermi surface are described by parameterizations of de Haas--van Alphen
data. We use a phonon spectrum which is a fit to neutron scattering data. By
including the momentum dependence of the Fermi surface good agreement is found
with the experimentally determined strong-coupling features which can be
described by a broad peak at around 4.5 meV and a narrower higher peak around 8
meV of equal height. The calculated features are found to be dominated by
scattering between states within the third band. By contrast scattering between
states in the second band leads to strong-coupling features in which the height
of the high energy peak is reduced by compared to that of the low
energy peak. This result is similar to that in the conventional isotropic
(momentum independent) treatment of superconductivity. Our results show that it
is important to use realistic models of the bandstructure and phonons, and to
avoid using momentum averaged quantities, in calculations in order to get
quantitatively accurate results
Dry Friction due to Adsorbed Molecules
Using an adiabatic approximation method, which searches for Tomlinson
model-like instabilities for a simple but still realistic model for two
crystalline surfaces in the extremely light contact limit, with mobile
molecules present at the interface, sliding relative to each other, we are able
to account for the virtually universal occurrence of "dry friction." The model
makes important predictions for the dependence of friction on the strength of
the interaction of each surface with the mobile molecules.Comment: four pages of latex, figure provide
- …