Behavior of Composites for the NASP Project

It is well known that ceramics are strong, highly heat resistant, refractory materials. Unfortunately, they are brittle and fail catastrophically. However, the strength as well as fracture toughness of ceramics can be greatly improved with the addition of continuous fibers, thus obtaining ceramic matrix composites (CMC). Normally the addition of aligned continuous fibers to a matrix degrades the transverse (the direction 90° to the fiber axes) properties while greatly improving the longitudinal properties. It has been shown that the addition of whiskers to a continuous fiber CMC will improve moduli and strength properties in both the transverse and longitudinal directions. Any improvement in the transverse direction is a tremendous advantage as loads may not always act along the longitudinal fiber direction, thus avoiding the necessity for lamination and angle plies. Strengthening ceramics by the addition of fibers and whiskers can hopefully produce a reliable refractory material that will offer service on the National Aerospace Plane (NASP) and other related space/hypersonic vehicles. If CMC can be shown to have high strength and toughness, they could fill a spot on the nosecap, leading edge surfaces as well as primary structures of the NASP

A Product Architecture-Based Conceptual DFA Technique

A conceptual design for assembly (DFA) method is introduced in this paper. The method incorporates DFA analysis into the conceptual design phase. Current DFA methods, essentially all of which are post-design DFA analyses, are reviewed with emphasis on the popular Boothroyd and Dewhurst method. The product architecture-based conceptual DFA method developed and presented in this article uses two relatively new concepts: the functional basis and the method of module heuristics. The functional basis is used to derive a functional model of a product in a standard language and the module heuristics are applied to the functional model to identify a modular product architecture. The embodiment or form definition phase then attempts to solve each module with one part (or as few as possible). The critical advantage of the conceptual DFA method is that it does not require a physical prototype or completed design geometry, thus reducing the number of design iterations before seeing DFA benefits. One case study compares the conceptual DFA method with the Boothroyd and Dewhurst DFA method and shows their equivalence in part count reduction. A second case study examines the evolution of products over the years. This study reveals the evolution of products into designs with smaller part counts, closely matching the modules identified by the conceptual DFA method. This lends credence to the method proposed in this paper as a useful tool for reducing the design cycle time

Stably accessing octave-spanning microresonator frequency combs in the soliton regime

Microresonator frequency combs can be an enabling technology for optical frequency synthesis and timekeeping in low size, weight, and power architectures. Such systems require comb operation in low-noise, phase-coherent states such as solitons, with broad spectral bandwidths (e.g., octave-spanning) for self-referencing to detect the carrier-envelope offset frequency. However, stably accessing such states is complicated by thermo-optic dispersion. For example, in the Si3N4 platform, precisely dispersion-engineered structures can support broadband operation, but microsecond thermal time constants have necessitated fast pump power or frequency control to stabilize the solitons. In contrast, here we consider how broadband soliton states can be accessed with simple pump laser frequency tuning, at a rate much slower than the thermal dynamics. We demonstrate octave-spanning soliton frequency combs in Si3N4 microresonators, including the generation of a multi-soliton state with a pump power near 40 mW and a single-soliton state with a pump power near 120 mW. We also develop a simplified two-step analysis to explain how these states are accessed in a thermally stable way without fast control of the pump laser, and outline the required thermal properties for such operation. Our model agrees with experimental results as well as numerical simulations based on a Lugiato-Lefever equation that incorporates thermo-optic dispersion. Moreover, it also explains an experimental observation that a member of an adjacent mode family on the red-detuned side of the pump mode can mitigate the thermal requirements for accessing soliton states

A Comparison of Functional Models for Use in the Function-Failure Design Method

When failure analysis and prevention, guided by historical design knowledge, are coupled with product design at its conception, shorter design cycles are possible. By decreasing the design time of a product in this manner, design costs are reduced and the product will better suit the customer s needs. Prior work indicates that similar failure modes occur with products (or components) with similar functionality. To capitalize on this finding, a knowledge base of historical failure information linked to functionality is assembled for use by designers. One possible use for this knowledge base is within the Elemental Function-Failure Design Method (EFDM). This design methodology and failure analysis tool begins at conceptual design and keeps the designer cognizant of failures that are likely to occur based on the product s functionality. The EFDM offers potential improvement over current failure analysis methods, such as FMEA, FMECA, and Fault Tree Analysis, because it can be implemented hand in hand with other conceptual design steps and carried throughout a product s design cycle. These other failure analysis methods can only truly be effective after a physical design has been completed. The EFDM however is only as good as the knowledge base that it draws from, and therefore it is of utmost importance to develop a knowledge base that will be suitable for use across a wide spectrum of products. One fundamental question that arises in using the EFDM is: At what level of detail should functional descriptions of components be encoded? This paper explores two approaches to populating a knowledge base with actual failure occurrence information from Bell 206 helicopters. Functional models expressed at various levels of detail are investigated to determine the necessary detail for an applicable knowledge base that can be used by designers in both new designs as well as redesigns. High level and more detailed functional descriptions are derived for each failed component based on NTSB accident reports. To best record this data, standardized functional and failure mode vocabularies are used. Two separate function-failure knowledge bases are then created aid compared. Results indicate that encoding failure data using more detailed functional models allows for a more robust knowledge base. Interestingly however, when applying the EFDM, high level descriptions continue to produce useful results when using the knowledge base generated from the detailed functional models

Risk Assessment in Early Software Design Based on the Software Function-Failure Design Method

Potential software failures present a sizable risk element in the design and development of many systems. In this paper, we augment the Software Function-Failure Design method, which is capable of predicting potential software failures in the very early stages of design, with the Risk in Early Design technique. This synergistic combination allows a risk assessment to be conducted at an early time in the software development process when traditional techniques are not applicable. The results are concise risk statements regarding the potential failure of functionalities with likelihood and consequence quantifications that can be used as part of a risk management program. The process is illustrated using a software failure database for the NASA Mars Exploratory Rover

DichroMatch: a website for similarity searching of circular dichroism spectra

Circular dichroism (CD) spectroscopy is a widely used method for examining the structure, folding and conformational changes of proteins. A new online CD analysis server (DichroMatch) has been developed for identifying proteins with similar spectral characteristics by detecting possible structurally and functionally related proteins and homologues. DichroMatch includes six different methods for determining the spectral nearest neighbours to a query protein spectrum and provides metrics of how similar these spectra are and, if corresponding crystal structures are available for the closest matched proteins, information on their secondary structures and fold classifications. By default, DichroMatch uses all the entries in the Protein Circular Dichroism Data Bank (PCDDB) for its comparison set, providing the broadest range of publicly available protein spectra to match with the unknown protein. Alternatively, users can download or create their own specialized data sets, thereby enabling comparisons between the structures of related proteins such as wild-type versus mutants or homologues or a series of spectra of the same protein under different conditions. The DichroMatch server is freely available at http://dichromatch.cryst.bbk.ac.uk

Product Family Design Knowledge Representation, Aggregation, Reuse, and Analysis

A flexible information model for systematic development and deployment of product families during all phases of the product realization process is crucial for product-oriented organizations. In current practice, information captured while designing products in a family is often incomplete, unstructured, and is mostly proprietary in nature, making it difficult to index, search, refine, reuse, distribute, browse, aggregate, and analyze knowledge across heterogeneous organizational information systems. To this end, we propose a flexible knowledge management framework to capture, reorganize, and convert both linguistic and parametric product family design information into a unified network, which is called a networked bill of material (NBOM) using formal concept analysis (FCA); encode the NBOM as a cyclic, labeled graph using the Web Ontology Language (OWL) that designers can use to explore, search, and aggregate design information across different phases of product design as well as across multiple products in a product family; and analyze the set of products in a product family based on both linguistic and parametric information. As part of the knowledge management framework, a PostgreSQL database schema has been formulated to serve as a central design repository of product design knowledge, capable of housing the instances of the NBOM. Ontologies encoding the NBOM are utilized as a metalayer in the database schema to connect the design artifacts as part of a graph structure. Representing product families by preconceived common ontologies shows promise in promoting component sharing, and assisting designers search, explore, and analyze linguistic and parametric product family design information. An example involving a family of seven one-time-use cameras with different functions that satisfy a variety of customer needs is presented to demonstrate the implementation of the proposed framework

History of Deer Herd Reduction for Tick Control on Maine’s Offshore Islands

The incidence of Lyme disease in Maine is associated with high abundance of blacklegged (deer) ticks, which in turn has been partly attributed to local overabundance of white-tailed deer. With evidence from Monhegan Island that the complete removal of deer reduced ticks and risk of contracting Lyme disease, nine other offshore communities initiated efforts to cull deer. We reviewed and summarized available histories of deer management on Maine’s offshore islands. Concern about Lyme disease provided the overarching impetus for deer culls. Culls mostly occurred on islands that have no regular firearms hunting season, island communities have been challenged to control deer numbers, and social acceptance of deer culls varied. Integrated tick management (ITM) is the key to controlling ticks, but statewide ITM policy is lacking. Formation of vector control districts with statewide ITM policy would support all communities in Maine