2,339 research outputs found
The use of graphics in the design of the human-telerobot interface
The Man-Systems Telerobotics Laboratory (MSTL) of NASA's Johnson Space Center employs computer graphics tools in their design and evaluation of the Flight Telerobotic Servicer (FTS) human/telerobot interface on the Shuttle and on the Space Station. It has been determined by the MSTL that the use of computer graphics can promote more expedient and less costly design endeavors. Several specific examples of computer graphics applied to the FTS user interface by the MSTL are described
Movements and Habitats of Brood-Rearing Wood Ducks On A Prairie River
Radio telemetry and brood surveys were used to evaluate wood duck (Aix sponsa) brood habitat and movements along 40 km of the Big Sioux River in eastern South Dakota during 1979-81. Most of the oxbows and nearby wetlands in the study area contained water in 1979-80, but drought dried all but 2 of the 33 oxbows in 1981. Fourteen brood hens were radio monitored. In 1980, 4 hens utilized oxbows, 1 hen utilized the river, and 2 hens used other habitats for brood rearing. In 1981, 4 hens utilized oxbows, 2 hens utilized the river, and 1 hen utilized the outlet of a nearby lake for brood rearing. The longest brood movements generally occurred during the 2 days following nest exodus. Hens apparently had initial brood-rearing sites selected before nest exodus. In 1979, no wood duck broods were found on 43 upland wetlands located within 0.8 km of the river, 0.46 broods/km were seen on oxbows, and 0.05 broods/km and 1.67 broods/km were seen on the river. In 1980 and 1981, respectively, 0.63 broods/km and 1.67 broods/km were seen on oxbows, and 0.15 broods/km and 0.27 broods/km were seen on the river. Oxbows appeared to be preferred brood habitat, while the river served primarily as a travel route between oxbows. The lentic oxbow waters contain abundant emergent and submergent vegetation and support abundant invertebrate populations, thereby meeting brood requirements for food and cover
Telepresence for space: The state of the concept
The purpose here is to examine the concept of telepresence critically. To accomplish this goal, first, the assumptions that underlie telepresence and its applications are examined, and second, the issues raised by that examination are discussed. Also, these assumptions and issues are used as a means of shifting the focus in telepresence from development to user-based research. The most basic assumption of telepresence is that the information being provided to the human must be displayed in a natural fashion, i.e., the information should be displayed to the same human sensory modalities, and in the same fashion, as if the person where actually at the remote site. A further fundamental assumption for the functional use of telepresence is that a sense of being present in the work environment will produce superior performance. In other words, that sense of being there would allow the human operator of a distant machine to take greater advantage of his or her considerable perceptual, cognitive, and motor capabilities in the performance of a task than would more limited task-related feedback. Finally, a third fundamental assumption of functional telepresence is that the distant machine under the operator's control must substantially resemble a human in dexterity
Why Do School District Budget Referenda Fail?
[Excerpt] Public elementary and secondary education is financed in many states at least partially at the local level and school district budgets in many states are determined by voter referenda. To date, however, there have been no studies that sought to explain why the proportion of school district budget proposals in a state that are approved by voters in referenda varies over time. Similarly no research has used panel data on school districts to test whether budget referenda failures are concentrated in a small number of school districts within a state and whether the failure of a budget referendum in a school district in one year influences the likelihood that voters in the district subsequently defeat a budget referendum in the next year. Our paper uses data from school budget votes in New York State to answer these questions
Illumination requirements for operating a space remote manipulator
Critical issues and requirements involved in illuminating remote manipulator operations in space help establish engineering designs for these manipulators. A remote manipulator is defined as any mechanical device that is controlled indirectly or from a distance by a human operator for the purpose of performing potentially dangerous or hazardous tasks to increase safety, reliability, and efficiency. Future space flights will rely on remote manipulators for a variety of tasks including satellite repair and servicing, structural assembly, data collection and analysis, and performance of contingency tasks. Carefully designed illumination of these manipulators will assure that these tasks will be completed efficiently and successfully. Studies concerning the influence of illumination on operation of a remote manipulator are few. Available results show that illumination can influence how successfully a human operates a remote manipulator. The intent of this study was to more fully examine this topic
Programmable display pushbuttons on the Space Station's telerobot control panel
The Man-Systems Telerobotics Laboratory at NASA's Johnson Space Center and supported by Lockheed, is working to ensure that the Flight Telerobotic Servicer (FTS) to be used on the Space Shuttle (Orbiter) and the Space Station has a well designed user interface from a Human Factors perspective. The FTS, which is a project led by NASA's Goddard Space Flight Center, will be a telerobot used for Space Station construction, maintenance, and satellite repair. It will be directly controlled from workstations on the Orbiter and the Space Station and monitored from a ground workstation. The FTS will eventually evolve into a more autonomous system, but in the short-term the system will be manually operated (teleoperated) for many tasks. This emphasizes the importance of the human/telerobot interface on this system. This phase of the FTS workstation evaluation covers a preliminary study of programmable display pushbuttons (PDP's). The PDP is constructed of a matrix of directly addressable electroluminescent (EL) pixels which can be used to form dot-matrix characters. PDP's can be used to display more than one message and to control more than one function. Since the PDP's have these features, then a single PDP may possibly replace the use of many single-function pushbuttons, rotary switches, and toggle switches, thus using less panel space. It is of interest to determine if PDP's can be used to adequately perform complex hierarchically structured task sequences. The objective of this investigation was to compare the performance of experienced and inexperienced Remote Manipulator System (RMS) operators while performing an RMS like task on simulated PDP and non-PDP computer prototypes so that guidelines governing the use of programmable display pushbuttons on the FTS workstation could be created. The functionality of the RMS on the Orbiter was used as a model for this evaluation since the functionality of the FTS at the time of this writing has not been solidified
Seasonal movements and habitat use of African buffalo in Ruaha National Park, Tanzania.
BACKGROUND:Assessing wildlife movements and habitat use is important for species conservation and management and can be informative for understanding population dynamics. The African buffalo (Syncerus caffer) population of Ruaha National Park, Tanzania has been declining, and little was known about the movement, habitat selection, and space use of the population, which is important for understanding possible reasons behind the decline. A total of 12 African buffalo cows from four different herds were collared with satellite transmitters. Movements were assessed over 2 years from 11 animals. RESULTS:The space use of the individual collared buffaloes as an approximation of the 95% home range size estimated using Brownian bridge models, ranged from 73 to 601 km2. The estimated home ranges were larger in the wet season than in the dry season. With the exception of one buffalo all collared animals completed a wet season migration of varying distances. A consistent pattern of seasonal movement was observed with one herd, whereas the other herds did not behave the same way in the two wet seasons that they were tracked. Herd splitting and herd switching occurred on multiple occasions. Buffaloes strongly associated with habitats near the Great Ruaha River in the dry season and had little association to permanent water sources in the wet season. Daily movements averaged 4.6 km (standard deviation, SD = 2.6 km), with the longest distances traveled during November (mean 6.9 km, SD = 3.6 km) at the end of the dry season and beginning of the wet season. The shortest daily distances traveled occurred in the wet season in April-June (mean 3.6 km, SD = 1.6-1.8 km). CONCLUSION:The Great Ruaha River has experienced significant drying in the last decades due to water diversions upstream, which likely has reduced the suitable range for buffaloes. The loss of dry season habitat due to water scarcity has likely contributed to the population decline of the Ruaha buffaloes
Library Discussion Panel Part I
Interview 1.
The Library Interview Series is a set of interviews with a variety of personnel involved with the planning and building of the new Jerry Falwell Library building. The building’s history and planning are discussed as well as the history of the library in general. The recordings were made just before the opening of the new building in early 2014.
Lowell Walters; Carl Merat; Abigail Sattler; Greg Smit
Speech versus manual control of camera functions during a telerobotic task
This investigation has evaluated the voice-commanded camera control concept. For this particular task, total voice control of continuous and discrete camera functions was significantly slower than manual control. There was no significant difference between voice and manual input for several types of errors. There was not a clear trend in subjective preference of camera command input modality. Task performance, in terms of both accuracy and speed, was very similar across both levels of experience
Spitzer and near-infrared observations of a new bi-polar protostellar outflow in the Rosette Molecular Cloud
We present and discuss \emph{Spitzer} and near-infrared H observations
of a new bi-polar protostellar outflow in the Rosette Molecular Cloud. The
outflow is seen in all four IRAC bands and partially as diffuse emission in the
MIPS 24 m band. An embedded MIPS 24 m source bisects the outflow and
appears to be the driving source. This source is coincident with a dark patch
seen in absorption in the 8 m IRAC image. \emph{Spitzer} IRAC color
analysis of the shocked emission was performed from which thermal and column
density maps of the outflow were constructed. Narrow-band near-infrared (NIR)
images of the flow reveal H emission features coincident with the high
temperature regions of the outflow. This outflow has now been given the
designation MHO 1321 due to the detection of NIR H features. We use these
data and maps to probe the physical conditions and structure of the flow.Comment: Accepted for publication in The Astrophysical Journa
- …