2,925 research outputs found
Microbial dynamics during azo dye degradation in a UASB reactor supplied with yeast extract
As Borboletas (lepidoptera: Papilionoidea E Hesperioidea) Da Reserva Particular Do Patrimônio Natural Fazenda Lontra/saudade, Itanagra, Litoral Norte Da Bahia, Brasil
The Private Reserve of Natural Heritage Fazenda Lontra/Saudade (FLS), located in the Northern Coast of Bahia state, Brazil, is the largest (1,377.33 ha) preserved Atlantic Forest area between Paraguaçu and São Francisco rivers in Bahia and Sergipe, respectively. A list of 260 species belonging to six families of butterflies is presented herein, being recorded 4 species of Papilionidae, 16 of Pieridae, 29 of Lycaenidae, 41 of Riodinidae, 87 of Nymphalidae and 83 of Hesperiidae. The butterfly community was composed mainly by widespread species commonly found in open habitats. There were also many species typical of forested areas, as such Morpho telemachus richardusFruhstorfer, 1898 (Nymphalidae: Morphini), a new record to the Northeastern Brazil. © 2016, Universidade Estadual de Campinas UNICAMP. All rights reserved.16
Effects Of Stress On Electron Emission From Nanostructured Carbon Materials
The electron field emission from a graphite like amorphous carbon film was investigated. Threshold fields as low as 8 V/νm were observed at an assisting energy of 400eV. The field emission characteristics of the films were explained in terms of the high sp2 concentration, and the high intrinsic compressive stress modifying the electronic band structure of the film/graphitic nanostructures.21417101714McKenzie, D.R., Muller, D., Pailthope, B.A., (1991) Phys. Rev. Lett., 67, p. 773Schwan, J., Ulrich, S., Theel, T., Roth, H., Ehrhardt, H., Becker, P., Silva, S.R.P., (1997) J. Appl. Phys., 82, p. 6024Lifshitz, Y., Kasi, S.R., Rabalais, J.W., Eckstein, W., (1990) Phys. Rev. B, 41, p. 10468Robertson, J., (1993) Diamond Relat. Mater., 2, p. 984Lacerda, R.G., Hammer, P., Lepienski, C.M., Alvarez, F., Marques, F.C., (2001) J. Vac. Sci. Technol. A, 19, p. 971Bhattacharyya, S., Subramanyam, S.V., (1997) Appl. Phys. Lett., 71, p. 632Kilic, C., Mehrez, H., Ciraci, S., (1998) Phys. Rev. B, 58, p. 7872Uher, C., Hockey, R.L., Ben-Jacob, E., (1987) Phys. Rev. B, 35, p. 4483Satyanarayana, B.S., Hart, A., Milne, W.I., Robertson, J., (1997) Appl. Phys. Lett., 71, p. 1430Carey, J.D., Forrest, R.D., Silva, S.R.P., (2001) Appl. Phys. Lett., 78, p. 2339Illie, A., Ferrari, C., Yagi, T., Robertson, J., (2000) Appl. Phys. Lett., 76, p. 2627De Lima M.M., Jr., Lacerda, R.G., Vilcarromero, J., Marques, F.C., (1999) J. Appl. Phys., 86, p. 4936Hoffman, R.W., (1966) Physics of Thin Films, 3, pp. 211-273. , edited by G. Hass and R. E. Thun (Academic, New YorkCarey, J.D., Silva, S.R.P., (2001) Appl. Phys. Lett., 78, p. 347Hammer, P., Victoria, N.M., Alvarez, F., (2000) J. Vac. Sci. Technol. A, 18, p. 2277Lifshitz, Y., Lempert, G.D., Grossman, E., Avigal, L., Uzan-Saguy, C., Kalish, R., Khlik, J., Rabalais, J.W., (1995) Diamond Relat. Mater., 4, p. 318Fallon, P.J., Veerasamy, V.S., Davis, C.A., Robertson, J., Amaratunga, G.A.J., Milne, W.I., Koskinen, J., (1993) Phys. Rev. B, 48, p. 4777Ahuja, R., Auluck, S., Trygg, J., Wills, J.M., Eriksson, O., Johansson, B., (1995) Phys. Rev. B, 51, p. 4813Reynolds, W.N., Goggin, P.R., (1960) Philos. Mag., 5, p. 1049Lynch, R.W., Drickamer, H.G., (1966) J. Chem. Phys., 44, p. 181Chaumet, P.C., Dufour, J.P., (1998) J. Electrost., 43, p. 145Hryd, R., Charlier, A., McRae, E., (1997) Phys. Rev. B, 55, p. 682
Adherend effect on the peel strength of a brittle adhesive
Peel tests are widely used to characterize the peel strength of bonded joints and control adhesion quality. There are various configurations of peel test, such as the T-peel test, peel testing at 180°, the floating roller peel test, and the climbing drum peel test. These methods have been widely used mainly in the aeronautical industry, as a way of assessing the peel strength of metallic joints. However, with the growing use of composite materials in industry, it is necessary to characterize bonded joints with these materials when subjected to peeling loads. In this research, the adherend effect on the peel strength of a brittle adhesive is experimentally studied using the floating roller peel test with the aim of evaluating how adherend changes affect adhesion properties of brittle adhesives and also to assess the viability of using the floating roller peel test in composite-to-composite and composite-to-aluminum joints, as well as make a comparison with aluminum-aluminum joint performance. It is also intended to prove the applicability of this test for quality control of adhesion and determination of peel strength in joints with composite materials. The results show the Araldite® AV138 performance falls within the characteristic values of peel strength of other structural adhesives, particularly when composite adherends are concerned, and with reasonable repeatability considering it is a brittle adhesive.info:eu-repo/semantics/publishedVersio
Metazoários Parasitos De Lambari Astyanax Altiparanae, Coletados Do Rio Do Peixe, São Paulo, Sudeste Do Brasil
In March 2010, 44 specimens of Astyanax altiparanae Garutti & Britski, 2000, commonly known as “lambari do rabo amarelo”, collected from the Peixe river in the state of São Paulo, Brazil were analyzed. Out of these 44 fishes, 38 had at least one species of metazoan parasite. Fifteen metazoan parasites species were collected and identified: Urocleidoides trinidadensis, Diaphorocleidus kabatai, Diaphorocleidus orthodusus, Diaphorocleidus sp., Urocleidoides sp., Trinibaculum altiparanae, Gyrodactylus sp., Jainus hexops, Contracaecum sp., Procamallanus (Spirocamallanus) inopinatus, Vaigamus sp., Amplexibranchius bryconis, Ergasilus sp., Zonocotyloides haroltravassossi and Henneguya sp. Six species of parasites presented a prevalence of over 10%. Weight and length of fishes didn’t influence the parasitism. All parasites presented an aggregated distribution. The parasite community of Astyanax altiparanae from the Peixe river was characterized as having high richness and low uniformity. © 2016, Universidade Federal de Santa Maria. All rights reserved.46587688
Orelha de Elefante Mexicana (Opuntia stricta [Haw.] Haw.) spineless cactus as an option in crossbred dairy cattle diet
new genotype of spineless cactus is being used in the diets of dairy cattle that are raised in semi-arid regions. However, little is known about its nutritional value. This study aimed to evaluate the effects of replacing Miúda (Nopalea cochenillifera Salm Dyck) with Orelha de Elefante Mexicana (Opuntia stricta [Haw.] Haw.) spineless cactus, on nutrient intake and digestibility, milk yield and composition, feeding behaviour, microbial protein synthesis, nitrogen balance, and ruminal and blood parameters of dairy cows. Ten Girolando cows, 500 ± 51.6 kg bodyweight, were distributed in a double Latin square design 5 x 5. The treatments consisted of replacement levels of Miúda (MIU) by Orelha de Elefante Mexicana (OEM) at 0, 25, 50, 75, and 100%. The intake and digestibility of dry matter (DM) (14.38–12.95 kg d-1, 716.3–658.9 g d-1), organic matter (OM) (13.01–11.43 kg d-1, 747.8–704.8 g d-1), crude protein (CP) (2.02–1.61 kg d-1, 863.8–845.2 g d-1) and total digestible nutrients (TDN) (9.38–7.92 kg d-1) decreased linearly with the increase in replacement. Despite the decrease in intake and digestibility, the supply of nutrients was sufficient to maintain a milk yield of 12.5 kg d-1. The average daily weight gain decreased linearly with the increase in replacement, while protein microbial efficiency (g microbial CP kg-1 TDN intake; 91.24 to 127.44 g kg-1) increased linearly. Thus, OEM could replace 100% MIU in diets with 48% of spineless cactus, for crossbred lactating cows with 12.5 kg d-1 milk yield. Therefore, OEM is a viable new option for producing milk in smallholder livestock systems in semi-arid regions.Keywords: Alternative forage, milk yield, ruminal parameter, semi-arid, smallholder livestock syste
Estimation of kinetic parameters in a chromatographic separation model via Bayesian inference
A modelagem de processos de adsorção tem sido empregada com frequência nas indústrias químicas, petroquímicas e refinarias, por exemplo para separação e purificação de misturas em unidade de Leito Móvel Simulado (LMS). Na representação matemática do modelo, a determinação de parâmetros é um passo importante para o projeto de condições cromatográficas para a separação contínua, em processos do tipo LMS. Este trabalho tem por objetivo a análise de estimativa de parâmetros em processos de adsorção, usando um sistema cromatográfico com uma coluna, para a separação das substâncias Glicose e Frutose. Investiga-se o uso da abordagem Bayesiana, através de métodos de Monte Carlo via Cadeias de Markov (MCMC), assim como o uso da abordagem da máxima verossimilhança, utilizando duas técnicas estocásticas diferentes, o Algoritmo de Colisão de Partículas (PCA - Particle Collision Algorithm), e o Algoritmo de Otimização por Enxame de Partículas (PSO - Particle Swarm Optimization) para executar a tarefa de minimização da função objetivo. Diferentes casos são apresentados com o objetivo de analisar a significância estatística das estimativas obtidas para os parâmetros, fazendo-se uma comparação crítica entre a solução via inferência Bayesiana e via minimização da função objetivo com métodos estocásticos. Os resultados obtidos demonstram que o uso da abordagem Bayesiana fornece uma proposta vantajosa para a estimativa de parâmetros em transferência de massa, oferecendo resultados com maior riqueza de informação estatística.The modeling of adsorption processes appears quite frequently in the chemical industry, petrochemical plants and refineries, for example for separation and purification of mixtures in Simulated Moving Bed (SMB) units. In the mathematical formulation, the accurate determination of the model parameters is an important step for the design of chromatographic conditions for continuous separation in SMB processes. This work is aimed at the estimation of the model parameters in adsorption processes, using a chromatographic column for the separation of glucose and fructose. The Bayesian framework for inverse problems is investigated through the implementation of Markov Chain Monte Carlo methods (MCMC) and a critical comparison against the classical Maximum Likelihood approach, with the minimization of the objective function via two different stochastic techniques, namely the Particle Collision Algorithm (PCA), and the Particle Swarm Optimization (PSO) is performed. Different cases are presented in order to investigate the statistical significance of the estimates obtained, and perform comparisons between the solution via Bayesian inference and via the minimization of the objective function with the stochastic methods. The results demonstrate that the Bayesian approach employs less computational effort to achieve estimates with comparable statistical information.Peer Reviewe
- …