286 research outputs found
Uniaxial Tension Simulation Using Real Microstructure-based Representative Volume Elements Model of Dual Phase Steel Plate
AbstractDual-phase steels have become a favored material for car bodies. In this study, the deformation behavior of dual-phase steels under uniaxial tension is investigated by means of 2D Representative Volume Elements (RVE) model. The real metallographic graphs including particle geometry, distribution and morphology are considered in this RVE model. Stress and strain distributions between martensite and ferrite are analyzed. The results show that martensite undertakes most stress without significant strain while ferrite shares the most strain. The tensile failure is the result of the deforming inhomogeneity between martensite phase and ferrite phase, which is the key factor triggering the plastic strain localization on specimen section during the tensile test
Characteristics of trace metals in marine aerosols and their source identification over the Southern Ocean
Atmospheric trace metals (Cu, Zn, Cd, Pb, Fe, V, and Cr), As, Al and Na in marine aerosols were studied over the Southern Ocean during the 28th Chinese National Antarctic Research Expedition. Fe was the most abundant of the analyzed trace metals, with an average concentration of 28.824 ngâm-3. V and Zn concentrations were also high, and their average concentrations were 5.541 ngâm-3 and 2.584 ngâm-3, respectively. Although sea spray significantly influenced the marine aerosol particles measured (Na had the highest concentrations of the analyzed elements, with an average concentration of 2.65 ÎŒgâm-3), multivariate analyses (enrichment factor and principal components analysis) indicated that most of the elements were not associated with oceanic sources. Over the Southern Ocean, Fe, Cd, As, Al and Cr in the aerosols mainly originated from crustal sources, while Cu, Pb, V and Zn originated from crustal sources and anthropogenic emissions. The enrichment factors (EFcrust) for most elements (Fe, Al, As, Cr, Cd, Cu and V) were much lower in the northern latitudes, indicating that when the sampling occurred closer to land the concentrations of these elements in aerosols were strongly affected by terrestrial crustal sources
The effects of secondary mineral formation on Coe-type paleointensity determinations: Theory and simulation
Magnetic resonance imaging findings of intravascular leiomyomatosis of the uterus: a case report
BackgroundIntravascular leiomyomatosis (IVL) is often a non-malignant condition that grows inside the blood vessels and does not invade surrounding tissues. However, its presence within the blood vessels can lead to obstructions. The majority of IVL cases manifest symptoms related to blockage.Case presentationWe present a case of a 50-year-old female patient who was referred to our institution due to the presence of a common non-cancerous tumor in the uterus, known as a benign uterine leiomyoma. The tumor was identified during an ultrasound examination during a routine physical examination. Postoperative pathology established the existence of intrapelvic IVL.ConclusionIntrapelvic IVL often not present with complications when it is confined to the pelvic cavity. Furthermore, the imaging features of intrapelvic IVL resemble those of typical benign uterine leiomyomas. This can often result in the clinical misdiagnosis of the tumor as a typical benign uterine leiomyoma
Graphene as a Promising Electrode for Low-Current Attenuation in Nonsymmetric Molecular Junctions
International audienceWe have measured the single-molecule conductance of 1,-alkanedithiol molecular bridges ( = 4, 6, 8, 10, 12) on a graphene substrate using scanning tunneling microscopy (STM)-formed electrical junctions. The conductance values of this homologous series ranged from 2.3 nS (= 12) to 53 nS (= 4), with a decay constant ÎČ of 0.40 per methylene (âCH) group. This result is explained by a combination of density functional theory (DFT) and Keldyshâ Green function calculations. The obtained decay, which is much lower than the one obtained for symmetric gold junctions, is related to the weak coupling at the moleculeâgraphene interface and the electronic structure of graphene. As a consequence, we show that using graphene nonsymmetric junctions and appropriate anchoring groups may lead to a much-lower decay constant and more-conductive molecular junctions at longer lengths
The structural and optical properties of GaSb/InGaAs type-II quantum dots grown on InP (100) substrate
We have investigated the structural and optical properties of type-II GaSb/InGaAs quantum dots [QDs] grown on InP (100) substrate by molecular beam epitaxy. Rectangular-shaped GaSb QDs were well developed and no nanodash-like structures which could be easily found in the InAs/InP QD system were formed. Low-temperature photoluminescence spectra show there are two peaks centered at 0.75eV and 0.76ev. The low-energy peak blueshifted with increasing excitation power is identified as the indirect transition from the InGaAs conduction band to the GaSb hole level (type-II), and the high-energy peak is identified as the direct transition (type-I) of GaSb QDs. This material system shows a promising application on quantum-dot infrared detectors and quantum-dot field-effect transistor
Uptake selectivity of methanesulfonic acid (MSA) on fine particles over polynya regions of the Ross Sea, Antarctica
The uptake of methanesulfonic acid (MSA) on existing particles is a major route of the particulate MSA formation, however, MSA uptake on different particles is still lacking in knowledge. Characteristics of MSA uptake on different aerosol particles were investigated in polynya (an area of open sea water surrounded by ice) regions of the Ross Sea, Antarctica. Particulate MSA mass concentrations, as well as aerosol population and size distribution, were observed simultaneously for the first time to access the uptake of MSA on different particles. The results show that MSA mass concentration does not always reflect MSA particle population in the marine atmosphere. MSA uptake on aerosol particle increases the particle size and changes aerosol chemical composition, but it does not increase the particle population. The uptake rate of MSA on particles is significantly influenced by aerosol chemical properties. Sea salt particles are beneficial for MSA uptake, as MSA-Na and MSA-Mg particles are abundant in the Na and Mg particles, accounting for 0.43 +/- 0.21 and 0.41 +/- 0.20 of the total Na and Mg particles, respectively. However, acidic and hydrophobic particles suppress the uptake of MSA, as MSA-EC (elemental carbon) and MSA-SO42- particles account for only 0.24 +/- 0.68 and 0.26 +/- 0.47 of the total EC and SO42- particles, respectively. The results extend the knowledge of the formation and environmental behavior of MSA in the marine atmosphere.Peer reviewe
Towards a high-intensity muon source at CiADS
The proposal of a high-intensity muon source driven by the CiADS linac, which
has the potential to be one of the state-of-the-art facilities, is presented in
this paper. We briefly introduce the development progress of the
superconducting linac of CiADS. Then the consideration of challenges related to
the high-power muon production target is given and the liquid lithium jet muon
production target concept is proposed, for the first time. The exploration of
the optimal target geometry for surface muon production efficiency and the
investigation into the performance of liquid lithium jet target in muon rate
are given. Based on the comparison between the liquid lithium jet target and
the rotation graphite target, from perspectives of surface muon production
efficiency, heat processing ability and target geometry compactness, the
advantages of the new target concept are demonstrated and described
comprehensively. The technical challenges and the feasibility of the
free-surface liquid lithium target are discussed
- âŠ