1,918 research outputs found
Recent progress towards the electrosynthesis of ammonia from sustainable resources
Ammonia (NH3) is a key commodity chemical of vital importance for fertilisers. It is made on an industrial scale via the Haber Bosch process, which requires significant infrastructure to be in place such that ammonia is generally made in large, centralized facilities. If ammonia could be produced under less demanding conditions, then there would be the potential for smaller devices to be used to generate ammonia in a decentralized manner for local consumption. Electrochemistry has been proposed as an enabling technology for this purpose as it is relatively simple to scale electrolytic devices to meet almost any level of demand. Moreover, it is possible to envisage electrosynthetic cells where water could be oxidised to produce protons and electrons at the anode which could then be used to reduce and protonate nitrogen to give ammonia at the cathode. If this nitrogen were sourced from the air, then the only required infrastructure for this process would be supplies of water, air and electricity, the latter of which could be provided by renewables. Hence an electrosynthetic cell for ammonia production could allow NH3 to be generated sustainably in small, low-cost devices requiring only minimal facilities. In this review, we describe recent progress towards such electrosynthetic ammonia production devices, summarizing also some of the seminal literature in the field. Comparison is made between the various different approaches that have been taken, and the key remaining challenges in the electrosynthesis of ammonia are highlighted
JISC Final Report: IncReASe (Increasing Repository Content through Automation and Services)
The IncReASe (Increasing Repository Content through Automation and Services) was an eighteen month project (subsequently extended to twenty months) to enhance White Rose Research Online (WRRO)1. WRRO is a shared repository of research outputs (primarily publications) from the Universities of Leeds, Sheffield and York; it runs on the EPrints open source repository platform. The repository was created in 2004 and had steady growth but, in common with many other similar repositories, had difficulty in achieving a “critical mass” of content and in becoming truly embedded within researchers’ workflows. The main aim of the IncReASe project was to assess ingestion routes into WRRO with a view to lowering barriers to deposit. We reviewed the feasibility of bulk import of pre-existing metadata and/or full-text research outputs, hoping this activity would have a positive knock-on effect on repository growth and embedding. Prior to the project, we had identified researchers’ reluctance to duplicate effort in metadata creation as a significant barrier to WRRO uptake; we investigated how WRRO might share data with internal and external IT systems. This work included a review of how WRRO, as an institutional based repository, might interact with the subject repository of the Economic and Social Research Council (ESRC). The project addressed four main areas: (i) researcher behaviour: we investigated researcher awareness, motivation and workflow through a survey of archiving activity on the university web sites, a questionnaire and discussions with researchers (ii) bulk import: we imported data from local systems, including York’s submission data for the 2008 Research Assessment Exercise (RAE), and developed an import plug-in for use with the arXiv2 repository (iii) interoperability: we looked at how WRRO might interact with university and departmental publication databases and ESRC’s repository. (iv) metadata: we assessed metadata issues raised by importing publication data from a variety of sources. A number of outputs from the project have been made available from the IncReASe project web site http://eprints.whiterose.ac.uk/increase/. The project highlighted the low levels of researcher awareness of WRRO - and of broader open access issues, including research funders’ deposit requirements. We designed some new publicity materials to start to address this. Departmental publication databases provided a useful jumping off point for advocacy and liaison; this activity was helpful in promoting awareness of WRRO. Bulk import proved time consuming – both in terms of adjusting EPrints plug-ins to incorporate different datasets and in the staff time required to improve publication metadata. A number of deposit scenarios were developed in the context of our work with ESRC; we concentrated on investigating how a local deposit of a research paper and attendant metadata in WRRO might be used to populate ESRC’s repository. This work improved our understanding of researcher workflows and of the SWORD protocol as a potential (if partial) solution to the single deposit, multiple destination model we wish to develop; we think the prospect of institutional repository / ESRC data sharing is now a step closer. IncReASe experienced some staff recruitment difficulties. It was also necessary to adapt the project to the changing IT landscape at the three partner institutions – in particular, the introduction of a centralised publication management system at the University of Leeds. Although these factors had some impact on deliverables, the aims and objectives of the project were largely achieved
A Projection of Washington\u27s Financial Needs
This is a projection of the financial needs of the State of Washington over the next three biennial periods. It is intended to serve the practical need of observing current issues of state appropriations and financing in terms of apparent short-range trends. At the outset, it should be made clear that this effort is highly tentative. At the time of writing, basic data with respect to the trends that influence levels of governmental activity, both locally and statewide, fall far short of a desirable base for an accurate projection. Also, several possibilities for federal action which directly influence state and local outlays remain speculative
A shock wave study of Coconino sandstone
Hugoniot equation of state measurements from shock wave loading study of Coconino sandston
The asteroseismological potential of the pulsating DB white dwarf stars CBS 114 and PG 1456+103
We have acquired 65 h of single-site time-resolved CCD photometry of the
pulsating DB white dwarf star CBS 114 and 62 h of two-site high-speed CCD
photometry of another DBV, PG 1456+103. The pulsation spectrum of PG 1456+103
is complicated and variable on time scales of about one week and could only
partly be deciphered with our measurements. The modes of CBS 114 are more
stable in time and we were able to arrive at a frequency solution somewhat
affected by aliasing, but still satisfactory, involving seven independent modes
and two combination frequencies. These frequencies also explain the discovery
data of the star, taken 13 years earlier. We find a mean period spacing of 37.1
+/- 0.7 s significant at the 98% level between the independent modes of CBS 114
and argue that they are due to nonradial g-mode pulsations of spherical degree
l=1. We performed a global search for asteroseismological models of CBS 114
using a genetic algorithm, and we examined the susceptibility of the results to
the uncertainties of the observational frequency determinations and mode
identifications (we could not provide m values). The families of possible
solutions are identified correctly even without knowledge of m. Our optimal
model suggests Teff = 21,000 K and M_* = 0.730 M_sun as well as log(M_He/M_*) =
-6.66, X_O = 0.61. This measurement of the central oxygen mass fraction implies
a rate for the ^12C(alpha,gamma)^16O nuclear reaction near S_300=180 keV b,
consistent with laboratory measurements.Comment: 10 pages, 10 embedded figures, 3 embedded tables. Accepted for
publication in MNRA
The Data Processing Pipeline for the Herschel-HIFI Instrument
The HIFI data processing pipeline was developed to systematically process
diagnostic, calibration and astronomical observations taken with the HIFI
science instrumentas part of the Herschel mission. The HIFI pipeline processed
data from all HIFI observing modes within the Herschel automated processing
environment, as well as, within an interactive environment. A common software
framework was developed to best support the use cases required by the
instrument teams and by the general astronomers. The HIFI pipeline was built on
top of that and was designed with a high degree of modularity. This modular
design provided the necessary flexibility and extensibility to deal with the
complexity of batch-processing eighteen different observing modes, to support
the astronomers in the interactive analysis and to cope with adjustments
necessary to improve the pipeline and the quality of the end-products. This
approach to the software development and data processing effort was arrived at
by coalescing the lessons learned from similar research based projects with the
understanding that a degree of foresight was required given the overall length
of the project. In this article, both the successes and challenges of the HIFI
software development process are presented. To support future similar projects
and retain experience gained lessons learned are extracted.Comment: 18 pages, 5 figure
- …