Portable anti-theft device

In this rapid-evolving era, theft and robbery cases related to electronic equipment and vehicles among Malaysians society are more serious and critical. Among the most common cases are related to laptop, car, motorcycle theft and more. Most stolen items cannot be neither traced nor found in the absence of appropriate security systems. A study released by Number in 2016 stated that the crime rate index in Malaysia is highest at 65.56 level. This is the highest crime index in Southeast Asia and the 15th in the world [1]. Clearly, this study has shown the seriousness of theft and robbery in Malaysia. Hence, in order to minimize the crime rate on this matter, a system of rifts is designed and named as "Portable Anti-Theft Device "

Co adaptation of LiCl tolerant Solanum tuberosum L. callus cultures to NaCl stress

In this research, co-adaptation of the Calli of Solanum tuberosum, raised from petioles, to the presence of lithium (LiCl) and sodium chloride (NaCl) was studied. The cultures were adapted with LiCl in the absence of an osmotic stress and the response of adapted and unadapted calli to salinity was investigated. Undifferentiated callus growth was induced in S. tuberosum by the addition of 2 mg/l 2,4 dichlorophenoxy acetic acid (2,4-D), 0.25 mg/l kinetin to Murashige and Skoog medium. Subcultures were subjected to an incremental increase in LiCl to obtain adapted lines. Adapted and undapted calli were grown with LiCl and NaCl and the tissue content of Na+, K+, Ca2+, Mg2+ and proline levels were determined. Either 40 mM LiCl or 100 mM NaCl inhibited unadapted calli by more than 50%, while adapted calli grew normally under these conditions. The adapted calli exhibited a lower K+ content with or without salt and showed a lower accumulation of Na+ at 100 mM NaCl. The tissue K+ and Mg2+ contents decreased and their proline levels increased with salinity. A co-adaptation phenomenon is induced by LiCl that involves a regulation of K+ and Na+ contents and an accumulation of proline, which also brings about tolerance to osmotic effects of salt. This data is highly useful for devising breeding and molecular modification strategies for stress tolerance.Key words: Cations, proline, osmotic adjustment, salt tolerance, Solanum tuberosum

Low dose albumin for the prevention of renal impairment following large volume paracentesis in cirrhosis.

OBJECTIVES: To evaluate the effect of low dose Albumin i.e. 4 grams per litre of ascitic fluid after large volume paracentesis (LVP) for the prevention of paracentesis induced circulatory dysfunction (PICD) related renal impairment in cirrhosis. METHODS: Case records of all patients with cirrhosis who underwent LVP from January 12(th), 2011 till December 29(th), 2013 were reviewed. Patients were excluded if they had spontaneous bacterial peritonitis, creatinine \u3e1.5 mg/dl, hepatoma or if volume of ascitic fluid removed was \u3c5 litres. Data including age, gender, cause of cirrhosis, CTP score and volume of ascitic fluid drained were noted. In addition serum creatinine and serum sodium at baseline and one week post paracentesis were recorded. RESULTS: Two hundred and fourteen patients with cirrhosis underwent LVP during the study period. One hundred and thirty nine patients met the inclusion criteria and were analyzed. Patients were divided into two groups based on the amount of albumin given. The amount of albumin given was 25 grams and 50 grams while the volume of ascitic fluid removed were 6.2±1 litres and 10.4±1.5 litres in groups A and B respectively. One hundred and eight patients were in group A while thirty one patients were in group B respectively. Both groups received albumin at a dose of 4 grams per litre of ascitic fluid removed. Mean age in both groups were 53 years. Hepatitis C was the commonest etiology in both the groups, followed by Hepatitis B. More than 70% patients in both the groups were in child class C. Serum creatinine at baseline and one week post LVP was 1.04±0.24 mg/dl and 1.07±0.35 mg/dl in GROUP A while 1.11±0.23 mg/dl and 1.41±0.94 mg/dl in GROUP B. (P value 0.35). Similarly, serum sodium at baseline and one week post LVP was 130 ±5.6 meq/lit and 129.6±5.9 meq/lit in GROUP A while 127.6±5.8 meq/lit and 128±6.2 meq/lit in GROUP B respectively. (P value 0.14). CONCLUSION: This study suggests that 4 grams of albumin per litre of ascitic fluid drained is effective in preventing the PICD related renal impairment following large volume paracentesis in cirrhosis

Existence of solutions of fractal fractional partial differential equations through different contractions

In the past, the existence and uniqueness of the solutions of fractional differential equations have been investigated by many researchers theoretically in various approaches in the literature. In this paper, there is no discussion of the existence of solutions for the nonlinear differential equations with fractal fractional operators. The objective of this work is to present novel contraction approaches, notably the $\varpropto$-$\psi$-contraction $\varpropto$-type of the $\tilde{\texttt{F}}$-contraction, within the context of $\hat{F}$-metric and orbital metric spaces. The aim of this study is to illustrate certain fixed point theorems that offer a new and direct approach to establish the existence and uniqueness of the solution to the general partial differential equations by employing the fractal fractional operators

Analyzing the effect of nozzle diameter in fused deposition modeling for extruding polylactic acid using open source 3D printing

Fused deposition modeling (FDM) is one of the Rapid Prototyping (RP) technologies. The 3D Printer has been widely used in the fabrication of 3D products. One of the main issues has been to obtain a high quality for the finished parts. The present study focuses on the effect of nozzle diameter in terms of pressure drop, geometrical error as well as extrusion time. While using polylactic acid (PLA) as a material, the research was conducted using Finite Element Analysis (FEA) by manipulating the nozzle diameter, and the pressure drop along the liquefier was observed. The geometrical error and printing time were also calculated by using different nozzle diameters. Analysis shows that the diameter of the nozzle significantly affects the pressure drop along the liquefier which influences the consistency of the road width thus affecting the quality of the product’s finish. The vital aspect is minimizing the pressure drop to be as low as possible, which will lead to a good quality final product. The results from the analysis demonstrate that a 0.2 mm nozzle diameter contributes the highest pressure drop, which is not within the optimum range. In this study, by considering several factors including pressure drop, geometrical error and printing time, a 0.3 mm nozzle diameter has been suggested as being in the optimum range for extruding PLA material using open-source 3D printing. The implication of this result is valuable for a better understanding of the melt flow behavior of the PLA material and for choosing the optimum nozzle diameter for 3D printing

Exploring The Drivers of Technology Acceptance: A study on Pakistani University Student

The purpose of this study is to validate the technology acceptance model (TAM) in an educational context to explore the drivers of technology on students of Pakistani university. Technologies have extended the teaching quality and open the new doors for the student to make their career highly professional. The data were collected from 508 students through online questionnaire in Pakistan. For analyzing the research model PLS-SEM partial least squares method to structural equation modeling was chosen to analyze the effect of Trialability, Attitude towards technology, Behavior intention, perceived ease of use, perceived enjoyment, facilitating condition, Perceived usefulness, Technology complexity and demographic factors. The gap which we have find is about underprivileged countries that are poor in technology and have not get advancement and success in there so many countries yet. Limitation for this study are we have collected the data from university students. The research is based on descriptive research. Researchers choose a no probabilistic convenience sampling technique to collect data as it is fast, inexpensive and easy. The finding of this study is that all the independent variable has positive and significant relationship with dependent variable. We recommend that future researcher can add more variable to the research and use most updated software version

Effects of coating and lubrication on friction and wear for metal-to metal application

Friction and wear between sliding surfaces can lead to various issues in industrial applications, such as increased costs, reduced machine lifespan, loss of functionality, energy loss, and decreased system efficiency. To mitigate these problems, lubricants and coatings are commonly employed. This study aims to investigate the impact of coatings and lubrication on friction coefficient, wear volume loss, and lubricant temperature using the block-on-ring wear test. The effectiveness of different coatings (uncoated, DLC, CrN, and TiALN) and lubricants (anti-friction graphene oxide additive oil and strong nano engine oil additive) in reducing friction and wear is evaluated. The block-on-ring tests are conducted under varying loads (6-60 N), speeds (1450 rpm), lubricant volumes (40 ml), and durations (2-20 min). The coefficient of friction is measured using an inline load cell, wear volume loss is determined by weighing the blocks before and after the experiment, and lubricant temperature is monitored using thermocouples. The results indicate that the coefficient of friction decreases with increasing load, while the lubricant temperature rises. Coated blocks exhibit lower wear volume loss compared to uncoated blocks. Overall, the combination of CrN-coated blocks and anti-friction graphene oxide additive oil demonstrates the best tribological performance

Life cycle assessment of direct recycling hot press forging of aluminium AA7075 metal matrix composite

The primary objective of this research is to investigate the process of direct recycling of AA7075 aluminium alloy, which is extensively utilised in the aerospace and flight sectors due to its exceptional strength and lightweight characteristics. Alumina (Al2O3) is used as a reinforcing agent and the effectof hot press forging (HPF) parameters on the mechanical characteristics and surface integrity of the metal matrix composite (MMC) constructed of AA7075 alloy with 1% Al2O3 has been studied. Furthermore, the utilisation of an integrated life cycle assessment(LCA) approach is implemented to assess the environmental impacts and economic expenses associated with the recycling of aluminium via high-pressure forming for both the metal matrix composite and AA7075 alloy. Response surface methodology (RSM) is applied to ascertain the optimal parameters for high-performance filtration. The findings suggest that employing a forging temperature of 532.34 °C and a holding time of 60 min produces favourable results. When comparing the characteristics of the MMC and recycled aluminium, it can be observed that they both demonstrate similar essential process attributes. The utilisation of HPF in conjunction with the Multi-Material Composite has the potential to yield a reduction of up to 24.97% in Global Warming Potential (GWP). This research demonstrates the efficacy of HPF as a viable approach for environmentally conscious and economically efficient recycling of AA7075 aluminium scrap, thereby improving product performance and promotingsustainability

Length-weight relationship and relative condition factor of two dominant species (Cyclocheilithys apogon and Notopterus notopterus) at Subang Lake, Selangor, Malaysia

Length-weight relationships and relative condition factors were conducted to provide information on fish species’ growth conditions and general well-being in the freshwater habitat. This study was conducted using fish as a bioindicator for the health of the ecosystem. Cyclocheilithys apogon (Beardless barb) and Notopterus notopterus (Bronze featherback) are the most dominant species in Subang Lake. A four-month sampling was conducted to collect the sample of Beardless barb and Bronze featherback. A total of 422 individuals of Beardless barb and 344 individuals of Bronze featherback were measured and weighed. The mean total length of Breadless barb was 13.11 ± 1.31 cm with the mean weight of 31.88±9.93 g. The mean of the total length and weight of Bronze featherback was 16.05 ± 2.07 cm and 30.38 ± 15.63 g. Both fish species showed negative allometric growth with the exponent b value 2.884 and 2.886, respectively. The condition factor of Beardless barb (1.184 ± 0.134) and Bronze featherback (1.010 ± 0.163) obtained from this study reflects a fair growth condition based on K value by Barnham & Baxter (2003). Further studies need to be conducted to determine the significant impacts that affect fish species’ growth conditions

Blockchain technologies to mitigate COVID-19 challenges : a scoping review

Background: As public health strategists and policymakers explore different approaches to lessen the devastating effects of novel coronavirus disease (COVID-19), blockchain technology has emerged as a resource that can be utilized in numerous ways. Many blockchain technologies have been proposed or implemented during the COVID-19 pandemic; however, to the best of our knowledge, no comprehensive reviews have been conducted to uncover and summarise the main feature of these technologies. Objective: This study aims to explore proposed or implemented blockchain technologies used to mitigate the COVID-19 challenges as reported in the literature. Methods: We conducted a scoping review in line with guidelines of PRISMA Extension for Scoping Reviews (PRISMA-ScR). To identify relevant studies, we searched 11 bibliographic databases (e.g., EMBASE and MEDLINE) and conducted backward and forward reference list checking of the included studies and relevant reviews. The study selection and data extraction were conducted by 2 reviewers independently. Data extracted from the included studies was narratively summarised and described. Results: 19 of 225 retrieved studies met eligibility criteria in this review. The included studies reported 10 used cases of blockchain to mitigate COVID-19 challenges; the most prominent use cases were contact tracing and immunity passports. While the blockchain technology was developed in 10 studies, its use was proposed in the remaining 9 studies. The public blockchain technology was the most commonly utilized type in the included studies. All together, 8 different consensus mechanisms were used in the included studies. Out of 10 studies that identified the used platform, 9 studies used Ethereum to run the blockchain. Solidity was the most prominent programming language used in developing blockchain technology in the included studies. The transaction cost was reported in only 4 of the included studies and varied between USD 10−10 and USD 5. The expected latency and expected scalability were not identified in the included studies. Conclusion: Blockchain technologies are expected to play an integral role in the fight against the COVID-19 pandemic. Many possible applications of blockchain were found in this review; however, most of them are not mature enough to reveal their expected impact in the fight against COVID-19. We encourage governments, health authorities, and policymakers to consider all blockchain applications suggested in the current review to combat COVID-19 challenges. There is a pressing need to empirically examine how effective blockchain technologies are in mitigating COVID-19 challenges. Further studies are required to assess the performance of blockchain technologies’ fight against COVID-19 in terms of transaction cost, scalability, and/or latency when using different consensus algorithms, platforms, and access types