1,479 research outputs found
Liquid crystal seed nucleates liquidâsolid phase change in ceria nanoparticles
Molecular dynamics (MD) simulation was used to explore the liquidâsolid (crystal) phase change of a ceria
nanoparticle. The simulations reveal that the crystalline seed, which spontaneously evolves and nucleates
crystallisation, is a liquid rather than a solid. Evidence supporting this concept includes: (a) only 3% of the
total latent heat of solidification had been liberated after 25% of the nanoparticle had (visibly) crystallised.
(b) Cerium ions, comprising the (liquid) crystal seed had the same mobility as cerium ions comprising the
amorphous regions. (c) Cerium ion mobility only started to reduce (indicative of solidification) after 25% of
the nanoparticle had crystallised. (d) Calculated radial distribution functions (RDF) revealed no long-range
structure when 25% of the nanoparticle had (visibly) crystallised. We present evidence that the concept of
a liquid crystal seed is more general phenomenon rather than applicable only to nanoceria
Origin of electrochemical activity in nano-Li2MnO3; Stabilization via a 'point defect scaffold'
Molecular dynamics (MD) simulations of the charging of Li2MnO3 reveal that the reason nanocrystalline-Li2MnO3 is electrochemically active, in contrast to the parent bulk-Li2MnO3, is because in the nanomaterial the tunnels, in which the Li ions reside, are held apart by Mn ions, which act as a pseudo 'point defect scaffold'. The Li ions are then able to diffuse, via a vacancy driven mechanism, throughout the nanomaterial in all spatial dimensions while the 'Mn defect scaffold' maintains the structural integrity of the layered structure during charging. Our findings reveal that oxides, which comprise cation disorder, can be potential candidates for electrodes in rechargeable Li-ion batteries. Moreover, we propose that the concept of a 'point defect scaffold' might manifest as a more general phenomenon, which can be exploited to engineer, for example, two or three-dimensional strain within a host material and can be fine-tuned to optimize properties, such as ionic conductivity
Environment-mediated structure, surface redox activity and reactivity of ceria nanoparticles
Nanomaterials, with potential application as bio-medicinal agents, exploit the chemical properties of a solid, with the ability to be transported (like a molecule) to a variety of bodily compartments. However, the chemical environment can change significantly the structure and hence properties of a nanomaterial. Accordingly, its surface reactivity is critically dependent upon the nature of the (biological) environment in which it resides. Here, we use Molecular Dynamics (MD) simulation, Density Functional Theory (DFT) and aberration corrected TEM to predict and rationalise differences in structure and hence surface reactivity of ceria nanoparticles in different environments. In particular we calculate reactivity 'fingerprints' for unreduced and reduced ceria nanoparticles immersed in water and in vacuum. Our simulations predict higher activities of ceria nanoparticles, towards oxygen release, when immersed in water because the water quenches the coordinative unsaturation of surface ions. Conversely, in vacuum, surface ions relax into the body of the nanoparticle to relieve coordinative unsaturation, which increases the energy barriers associated with oxygen release. Our simulations also reveal that reduced ceria nanoparticles are more active towards surface oxygen release compared to unreduced nanoceria. In parallel, experiment is used to explore the activities of ceria nanoparticles that have suffered a change in environment. In particular, we compare the ability of ceria nanoparticles, in an aqueous environment, to scavenge superoxide radicals compared to the same batch of nanoparticles, which have first been dried and then rehydrated. The latter show a distinct reduction in activity, which we correlate to a change in the redox chemistry associated with moving between different environments. The reactivity of ceria nanoparticles is therefore not only environment dependent, but is also influenced by the transport pathway or history required to reach the particular environment in which its reactivity is to be exploited. Ă© 2013 The Royal Society of Chemistry
Accommodation of the misfit strain energy in the BaO(100)/MgO(100) heteroepitaxial ceramic interface using computer simulation techniques
Static atomistic simulation techniques have been employed to investigate the accommodation of the misfit strain energy in the BaO(100)/MgO(100) interface. The materials return to their natural (bulk) lattice parameters a few planes from the interface, while maintaining expanded or contracted lattice parameters at the interface to ensure charge matching of counter ions. BaO also forms three-dimensional islands when grown on MgO(100), in accordance with molecular beam epitaxy results. This behaviour is attributed to the instability of a monatomic BaO layer on MgO compared with a BaO bilayer
Stable isotopes, chronology and Bayesian models for the Viking archaeology of north-east Iceland
This paper reviews the results of a long-term research project that used stable isotope analyses (ÎŽ13C, ÎŽ15N, ÎŽ34S) and Bayesian mixing models to better model the chronology for a presumed Viking Age cemetery at HofstaĂ°ir, near Lake MĂœvatn in north-east Iceland. ÎŽ13C and radiocarbon dating indicated that many of the individuals consumed a large amount of marine protein, which results in a marine reservoir effect (MRE), making ages older than expected. In addition to the MRE, geological activity in the region has the potential to introduce massive quantities of radioactive âdeadâ carbon into the freshwater system, resulting in a very large freshwater reservoir effect (FRE) that can offset radiocarbon ages on the order of a few thousand years. The radiocarbon dates of organisms that derive an unknown proportion of their carbon from both marine and freshwater reservoirs are extremely difficult to âcorrectâ, or, more appropriately, model. The research not only highlights the complexities of dealing with multiple reservoirs, but also how important it is to develop models that are temporally and geographically relevant to the site under study. Finally, it shows how this data can be used to inform the development of chronological models for refining the dating for archaeological activity
Mechanical properties of mesoporous ceria nanoarchitectures
Architectural constructs are engineered to impart desirable mechanical properties facilitating bridges spanning a thousand meters and buildings nearly 1 km in height. However, do the same 'engineering-rules' translate to the nanoscale, where the architectural features are less than 0.0001 mm in size? Here, we calculate the mechanical properties of a porous ceramic functional material, ceria, as a function of its nanoarchitecture using molecular dynamics simulation and predict its yield strength to be almost two orders of magnitude higher than the parent bulk material. In particular, we generate models of nanoporous ceria with either a hexagonal or cubic array of one-dimensional pores and simulate their responses to mechanical load. We find that the mechanical properties are critically dependent upon the orientation between the crystal structure (symmetry, direction) and the pore structure (symmetry, direction). This journal i
Simulation study of copper(I) and copper(II) species in ZSM-5 zeolite
Low energy configurations of CuI and CuII species in the ZSM-5 zeolite, probed by energy minimisation techniques, are found to be bound strongly to framework aluminium or copper species
Radiocarbon dates from the Highland Jar and Coffin burial site of Phnom Khnang Peung, Cardamom Mountains, Cambodia
The Cardamom Mountain Jar and Coffin burial site of Phnom Khnang Peung is the most extensive example of the distinctive burial ritual first reported by Beavan et al. (2012a). The 40 intact Mae Nam Noi and late Angkorian-era ceramic jars used as burial vessels held a total of up to 152 individuals, representing the largest corpus of skeletal remains of any of the 10 known Jar and Coffin burial sites that have been discovered in the eastern ranges of the Cardamom Mountains of Cambodia. We report here on the radiocarbon dating of this site and notable burial phenomena, using a Bayesian approach to model the start and end date of activity as well as its overall span. The results of the dating and Bayesian analyses indicate that the Phnom Khnang Peung siteâs earliest burials began cal AD 1420â1440 (95% probability). Interestingly, the concen- tration of burial activity spans only 15â45 years (95% probability), despite the large number of inhumations at the site. The 14C chronology presented for the site places the Highland burial ritual coincident with a period of economic, political, and societal transformations in the lowland Angkorian polity, but the unique burial practice and trade relationships evidenced by the burial goods and maritime trade ware ceramics employed in the burial ritual suggest these Highland people were a culture apart from Angkorian cultural influences
Mechanical properties of ceria nanorods and nanochains; The effect of dislocations, grain-boundaries and oriented attachment
We predict that the presence of extended defects can reduce the mechanical strength of a ceria nanorod by 70%. Conversely, the pristine material can deform near its theoretical strength limit. Specifically, atomistic models of ceria nanorods have been generated with full microstructure, including: growth direction, morphology, surface roughening (steps, edges, corners), point defects, dislocations and grain-boundaries. The models were then used to calculate the mechanical strength as a function of microstructure. Our simulations reveal that the compressive yield strengths of ceria nanorods, ca. 10 nm in diameter and without extended defects, are 46 and 36 GPa for rods oriented along [211] and [110] respectively, which represents almost 10% of the bulk elastic modulus and are associated with yield strains of about 0.09. Tensile yield strengths were calculated to be about 50% lower with associated yield strains of about 0.06. For both nanorods, plastic deformation was found to proceed via slip in the {001} plane with direction ĂŁ??110ĂŁ?? - a primary slip system for crystals with the fluorite structure. Dislocation evolution for the nanorod oriented along [110] was nucleated via a cerium vacancy present at the surface. A nanorod oriented along [321] and comprising twin-grain boundaries with {111} interfacial planes was calculated to have a yield strength of about 10 GPa (compression and tension) with the grain boundary providing the vehicle for plastic deformation, which slipped in the plane of the grain boundary, with an associated ĂŁ??110ĂŁ?? slip direction. We also predict, using a combination of atomistic simulation and DFT, that rutile-structured ceria is feasible when the crystal is placed under tension. The mechanical properties of nanochains, comprising individual ceria nanoparticles with oriented attachment and generated using simulated self-assembly, were found to be similar to those of the nanorod with grain-boundary. Images of the atom positions during tension and compression are shown, together with animations, revealing the mechanisms underpinning plastic deformation. For the nanochain, our simulations help further our understanding of how a crystallising ice front can be used to 'sculpt' ceria nanoparticles into nanorods via oriented attachment. Ă© 2011 The Royal Society of Chemistry
- âŠ