Quantitative aspects of the interfacial catalytic oxidation of Dithiothreitol by dissolved oxygen in the presence of carbon nanoparticles

The catalytic nature of particulate matter is often advocated to explain its ability to generate reactive oxygen species, but quantitative data are lacking. We have performed molecular characterization of three different carbonaceous nanoparticles (NP) by 1. identifying and quantifying their surface functional groups based on probe gas-particle titration; 2. studying the kinetics of dissolved oxygen consumption in the presence of suspended NP's and dithiothreitol (DTT). We show that these NP's can reversibly change their oxidation state between oxidized and reduced functional groups present on the NP surface. By comparing the amount of O2 consumed and the number of strongly reducing sites on the NP, its average turnover ranged from 35 to 600 depending on the type of NP. The observed quadratic rate law for O2 disappearance points to a Langmuir-Hinshelwood surface-based reaction mechanism possibly involving semiquinone radical. In the proposed model, the strongly reducing surface site is assumed to be a polycyclic aromatic hydroquinone whose oxidation to the corresponding conjugated quinone is rate-limiting in the catalytic chain reaction. The presence and strength of the reducing surface functional groups are important for explaining the catalytic activity of NP in the presence of oxygen and a reducing agent like DTT

Characterization of lead-recycling facility emissions at various workplaces: Major insights for sanitary risks assessment

Most available studies on lead smelter emissions deal with the environmental impact of outdoor particles, but only a few focus on air quality at workplaces. The objective of this study is to physically and chemically characterize the Pb-rich particles emitted at different workplaces in a lead recycling plant. A multiscale characterization was conducted from bulk analysis to the level of individual particles, to assess the particles properties in relation with Pb speciation and availability. Process PM from various origins were sampled and then compared; namely Furnace and Refining PM respectively present in the smelter and at refinery workplaces, Emissions PM present in channeled emissions. These particles first differed by their morphology and size distribution, with finer particles found in emissions. Differences observed in chemical composition could be explained by the industrial processes. All PM contained the same major phases (Pb, PbS, PbO, PbSO4 and PbO·PbSO4) but differed on the nature and amount of minor phases. Due to high content in PM, Pb concentrations in the CaCl2 extractant reached relatively high values (40mgL−1). However, the ratios (soluble/total) of CaCl2 exchangeable Pb were relatively low (<0.02%) in comparison with Cd (up to 18%). These results highlight the interest to assess the soluble fractions of all metals (minor and major) and discuss both total metal concentrations and ratios for risk evaluations. In most cases metal extractability increased with decreasing size of particles, in particular, lead exchangeability was highest for channeled emissions. Such type of study could help in the choice of targeted sanitary protection procedures and for further toxicological investigations. In the present context, particular attention is given to Emissions and Furnace PM. Moreover, exposure to other metals than Pb should be considered

Oxidative potential of particles in different occupational environments: a pilot study

The oxidative potential (OP) of particulate matter has been proposed as a toxicologically relevant metric. This concept is already frequently used for hazard characterization of ambient particles but it is still seldom applied in the occupational field. The objective of this study was to assess the OP in two different types of workplaces and to investigate the relationship between the OP and the physicochemical characteristics of the collected particles. At a toll station, at the entrance of a tunnel ('Tunnel' site), and at three different mechanical yards ('Depot' sites), we assessed particle mass (PM4 and PM2.5 and size distribution), number and surface area, organic and elemental carbon, polycyclic aromatic hydrocarbon (PAH), and four quinones as well as iron and copper concentration. The OP was determined directly on filters without extraction by using the dithiothreitol assay (DTT assay-OP(DTT)). The averaged mass concentration of respirable particles (PM4) at the Tunnel site was about twice the one at the Depot sites (173±103 and 90±36 µg m(-3), respectively), whereas the OP(DTT) was practically identical for all the sites (10.6±7.2 pmol DTT min(-1) μg(-1) at the Tunnel site; 10.4±4.6 pmol DTT min(-1) μg(-1) at the Depot sites). The OP(DTT) of PM4 was mostly present on the smallest PM2.5 fraction (OP(DTT) PM2.5: 10.2±8.1 pmol DTT min(-1) μg(-1); OP(DTT) PM4: 10.5±5.8 pmol DTT min(-1) μg(-1) for all sites), suggesting the presence of redox inactive components in the PM2.5-4 fraction. Although the reactivity was similar at the Tunnel and Depot sites irrespective of the metric chosen (OP(DTT) µg(-1) or OP(DTT) m(-3)), the chemicals associated with OP(DTT) were different between the two types of workplaces. The organic carbon, quinones, and/or metal content (Fe, Cu) were strongly associated with the DTT reactivity at the Tunnel site whereas only Fe and PAH were associated (positively and negatively, respectively) with this reactivity at the Depot sites. These results demonstrate the feasibility of measuring of the OP(DTT) in occupational environments and suggest that the particulate OP(DTT) is integrative of different physicochemical properties. This parameter could be a potentially useful exposure proxy for investigating particle exposure-related oxidative stress and its consequences. Further research is needed mostly to demonstrate the association of OP(DTT) with relevant oxidative endpoints in humans exposed to particles

Oxidative Potential of Particles in Different Occupational Environments: A Pilot Study

The oxidative potential (OP) of particulate matter has been proposed as a toxicologically relevant metric. This concept is already frequently used for hazard characterization of ambient particles but it is still seldom applied in the occupational field. The objective of this study was to assess the OP in two different types of workplaces and to investigate the relationship between the OP and the physicochemical characteristics of the collected particles. At a toll station, at the entrance of a tunnel (‘Tunnel' site), and at three different mechanical yards (‘Depot' sites), we assessed particle mass (PM4 and PM2.5 and size distribution), number and surface area, organic and elemental carbon, polycyclic aromatic hydrocarbon (PAH), and four quinones as well as iron and copper concentration. The OP was determined directly on filters without extraction by using the dithiothreitol assay (DTT assay-OPDTT). The averaged mass concentration of respirable particles (PM4) at the Tunnel site was about twice the one at the Depot sites (173±103 and 90±36 µg m−3, respectively), whereas the OPDTT was practically identical for all the sites (10.6±7.2 pmol DTT min−1 μg−1 at the Tunnel site; 10.4±4.6 pmol DTT min−1 μg−1 at the Depot sites). The OPDTT of PM4 was mostly present on the smallest PM2.5 fraction (OPDTT PM2.5: 10.2±8.1 pmol DTT min−1 μg−1; OPDTT PM4: 10.5±5.8 pmol DTT min−1 μg−1 for all sites), suggesting the presence of redox inactive components in the PM2.5-4 fraction. Although the reactivity was similar at the Tunnel and Depot sites irrespective of the metric chosen (OPDTT µg−1 or OPDTT m−3), the chemicals associated with OPDTT were different between the two types of workplaces. The organic carbon, quinones, and/or metal content (Fe, Cu) were strongly associated with the DTT reactivity at the Tunnel site whereas only Fe and PAH were associated (positively and negatively, respectively) with this reactivity at the Depot sites. These results demonstrate the feasibility of measuring of the OPDTT in occupational environments and suggest that the particulate OPDTT is integrative of different physicochemical properties. This parameter could be a potentially useful exposure proxy for investigating particle exposure-related oxidative stress and its consequences. Further research is needed mostly to demonstrate the association of OPDTT with relevant oxidative endpoints in humans exposed to particle

Exhaled breath condensate as a matrix for combustion-based nanoparticle exposure and health effect evaluation

Health assessment and medical surveillance of workers exposed to combustion nanoparticles are challenging. The aim was to evaluate the feasibility of using exhaled breath condensate (EBC) from healthy volunteers for (1) assessing the lung deposited dose of combustion nanoparticles and (2) determining the resulting oxidative stress by measuring hydrogen peroxide (H2O2) and malondialdehyde (MDA). Methods: Fifteen healthy nonsmoker volunteers were exposed to three different levels of sidestream cigarette smoke under controlled conditions. EBC was repeatedly collected before, during, and 1 and 2 hr after exposure. Exposure variables were measured by direct reading instruments and by active sampling. The different EBC samples were analyzed for particle number concentration (light-scattering-based method) and for selected compounds considered oxidative stress markers. Results: Subjects were exposed to an average airborne concentration up to 4.3×10(5) particles/cm(3) (average geometric size ∼60-80 nm). Up to 10×10(8) particles/mL could be measured in the collected EBC with a broad size distribution (50(th) percentile ∼160 nm), but these biological concentrations were not related to the exposure level of cigarette smoke particles. Although H2O2 and MDA concentrations in EBC increased during exposure, only H2O2 showed a transient normalization 1 hr after exposure and increased afterward. In contrast, MDA levels stayed elevated during the 2 hr post exposure. Conclusions: The use of diffusion light scattering for particle counting proved to be sufficiently sensitive to detect objects in EBC, but lacked the specificity for carbonaceous tobacco smoke particles. Our results suggest two phases of oxidation markers in EBC: first, the initial deposition of particles and gases in the lung lining liquid, and later the start of oxidative stress with associated cell membrane damage. Future studies should extend the follow-up time and should remove gases or particles from the air to allow differentiation between the different sources of H2O2 and MDA

Sensitive photonic system to measure oxidative potential of airborne nanoparticles and ROS levels in exhaled air

A photonic system has been developed that enables sensitive quantitative determination of reactive oxygen species (ROS) - mainly hydrogen peroxide (H2O2) - in aerosol samples such as airborne nanoparticles and exhaled air from patients. The detection principle relies on the amplification of the absorbance under multiple scattering conditions due to optical path lengthening [1] and [2]. In this study, the presence of cellulose membrane that acts as random medium into the glass optical cell considerably improved the sensitivity of the detection based on colorimetric FOX assay (FeII/orange xylenol). Despite the loss of assay volume (cellulose occupies 75% of cell volume) the limit of detection is enhanced by one order of magnitude reaching the value of 9 nM (H2O2 equivalents). Spectral analysis is performed automatically with a periodicity of 5 to 15 s, giving rise to real-time ROS measurements. Moreover, the elution of air sample into the collection chamber via a micro-diffuser (impinger) enables quantitative determination of ROS contained in or generated from airborne samples. As proof-of-concept the photonic ROS detection system was used in the determination of both ROS generated from traffic pollution and ROS contained in the exhaled breath as lung inflammation biomarkers

Characterization of surface functional groups present on laboratory-generated and ambient aerosol particles by means of heterogeneous titration reactions

A Knudsen flow reactor has been used to quantify surface functional groups on aerosols collected in the field. This technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. In the first part of this work, the reactivity of different probe gases on laboratory-generated aerosols (limonene SOA, Pb(NO3)2, Cd(NO3)2) and diesel reference soot (SRM 2975) has been studied. Five probe gases have been selected for the quantitative determination of important functional groups: N(CH3)3 (for the titration of acidic sites), NH2OH (for carbonyl functions), CF3COOH and HCl (for basic sites of different strength), and O3 (for oxidizable groups). The second part describes a field campaign that has been undertaken in several bus depots in Switzerland, where ambient fine and ultrafine particles were collected on suitable filters and quantitatively investigated using the Knudsen flow reactor. Results point to important differences in the surface reactivity of ambient particles, depending on the sampling site and season. The particle surface appears to be multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also indicate that the surface of ambient particles was characterized by a high density of carbonyl functions (reactivity towards NH2OH probe in the range 0.26-6 formal molecular monolayers) and a low density of acidic sites (reactivity towards N(CH3)3 probe in the range 0.01-0.20 formal molecular monolayer). Kinetic parameters point to fast redox reactions (uptake coefficient ?0&gt;10-3 for O3 probe) and slow acid-base reactions (?0&lt;10-4 for N(CH3)3 probe) on the particle surface. [Authors]]]> Vehicle Emissions ; Aerosols ; Particulate Matter ; Oxidative Stress ; Reactive Oxygen Species ; Biological Markers ; Surface Properties ; Occupational Exposure eng https://serval.unil.ch/resource/serval:BIB_B477DBDA9F10.P001/REF.pdf http://nbn-resolving.org/urn/resolver.pl?urn=urn:nbn:ch:serval-BIB_B477DBDA9F105 info:eu-repo/semantics/altIdentifier/urn/urn:nbn:ch:serval-BIB_B477DBDA9F105 info:eu-repo/semantics/acceptedVersion info:eu-repo/semantics/openAccess Copying allowed only for non-profit organizations https://serval.unil.ch/disclaimer application/pdf oai:serval.unil.ch:BIB_B478041350E0 2022-05-07T01:25:26Z <oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd"> https://serval.unil.ch/notice/serval:BIB_B478041350E0 Négocier pour pacifier. Ambassadeurs et médiateurs durant la guerre de Cent Ans Pibiri, Eva info:eu-repo/semantics/conferenceObject inproceedings La paix des Dames, volet 1, Entre politique, diplomatie et cérémoniel Dumont, Jonathan (ed.) Fragnart, Laure (ed.) Girault, Pierre-Gilles (ed.) Le Roux, Nicolas (ed.) fre oai:serval.unil.ch:BIB_B47924D65A2D 2022-05-07T01:25:26Z <oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd"> https://serval.unil.ch/notice/serval:BIB_B47924D65A2D Cancer du sein et obésité, une liaison dangereuse [Breast cancer and obesity, a dangerous relation]. info:eu-repo/semantics/altIdentifier/pmid/22734178 Zaman, K. Bodmer, A. Pralong, F. Castiglione-Gertsch, M. info:eu-repo/semantics/review article 2012 Revue Médicale Suisse, vol. 8, no. 342, pp. 1101-1104 info:eu-repo/semantics/altIdentifier/pissn/1660-9379 urn:issn:1660-9379 <![CDATA[Obesity is associated with different cancers including breast cancer, whose incidence is increased in postmenopausal women. It has an adverse impact on the prognosis of the patients, regardless of their menopausal status. The fact of receiving a systemic adjuvant therapy does not neutralize the prognostic role of obesity. Moderate weight loss after cancer diagnosis could improve the outcome of the patients, while a weight gain during treatment seems without significant effect. Currently available data are still too incomplete to justify systematic programs to lose weight with an oncologic therapeutic aim. However, it is worth to encourage and support our patients to have an optimal diet, physical activity, and to lose weight as promotion of general health

Evaluation de l'exposition humaine au plomb par ingestion et inhalation de PM10 et PM2, 5 émises par une usine de recyclage de batteries

National audienceLes usines de recyclage de batteries sont actuellement l'une des principales activités humaines à l'origine d'émissions de plomb dans l'environnement. Leurs salariés sont exposés aux particules de process concentrées en plomb et autres métaux par deux voies d'exposition : l'inhalation et l'ingestion. Dans le but de préserver au mieux la santé des travailleurs, il est donc important de caractériser l'exposition à ces particules ainsi que leur potentiel toxique. Les particules les plus fines (de diamètre inférieur à 10 µm) présentes dans l'ambiance des postes de travail contribuent particulièrement à l'exposition des travailleurs : elles représentent non seulement la fraction inhalable mais contribuent probablement à une fraction non négligeable des particules ingérées. Pour l'ingestion des particules, outre la concentration totale des particules en plomb, il est important de connaître la fraction biodisponible du plomb. Cette dernière peut être approchée par la fraction bioaccessible (fraction du contaminant solubilisée dans le tractus gastro-intestinal). Cette dernière est considérée comme supérieure ou égale à la fraction biodisponible. C'est la première fois que la bioaccessibilité du plomb est mesurée sur des particules en milieu professionnel. En ce qui concerne l'inhalation, le potentiel toxique d'une particule semble être fonction non seulement de propriétés physiques intrinsèques (taille et surface spécifique) mais aussi de propriétés chimiques. En particulier, il a récemment été avancé que le potentiel rédox des particules induit un stress oxydatif qui pourrait être à l'origine des effets biologiques observés suite à leur inhalation par la génération d'espèces réactives de l'oxygène (ROS). L'objectif de ce travail est d'étudier l'influence de la taille des particules sur la bioaccessibilité du plomb ingéré et sur leur potentiel rédox. Il contribue à l'application et à la validation de ces deux tests chimiques qui pourraient devenir des outils d'évaluation des risques sanitaires répondant en particulier à l'objectif du règlement européen Reach de réduire les tests de toxicité sur animaux

Challenges in Quantifying 8-OHdG and 8-Isoprostane in Exhaled Breath Condensate

Exhaled breath condensate (EBC) has attracted substantial interest in the last few years, enabling the assessment of airway inflammation with a non-invasive method. Concentrations of 8-Hydroxydesoxyguanosine (8-OHdG) and 8-isoprostane in EBC have been suggested as candidate biomarkers for lung diseases associated with inflammation and oxidative stress. EBC is a diluted biological matrix and consequently, requires highly sensitive chemical analytic methods (picomolar range) for biomarker quantification. We developed a new liquid chromatography coupled to tandem mass spectrometry method to quantify 8-OHdG and 8-isoprostane in EBC simultaneously. We applied this novel biomarker method in EBC obtained from 10 healthy subjects, 7 asthmatic subjects, and 9 subjects with chronic obstructive pulmonary disease. Both biomarkers were below the limit of detection (LOD) despite the good sensitivity of the chemical analytical method (LOD = 0.5 pg/mL for 8-OHdG; 1 pg/mL for 8-isoprostane). This lack of detection might result from factors affecting EBC collections. These findings are in line with methodological concerns already raised regarding the reliability of EBC collection for quantification of 8-OHdG and 8-isoprostane. Precaution is therefore needed when comparing literature results without considering methodological issues relative to EBC collection and analysis. Loss of analyte during EBC collection procedures still needs to be resolved before using these oxidative stress biomarkers in EBC