560 research outputs found
AMBER on the VLTI: data processing and calibration issues
We present here the current performances of the AMBER / VLTI instrument for
standard use and compare these with the offered modes of the instrument. We
show that the instrument is able to reach its specified precision only for
medium and high spectral resolution modes, differential observables and bright
objects. For absolute observables, the current achievable accuracy is strongly
limited by the vibrations of the Unit Telescopes, and also by the observing
procedure which does not take into account the night-long transfer function
monitoring. For low-resolution mode, the current limitation is more in the data
reduction side, since several effects negligible at medium spectral resolution
are not taken into account in the current pipeline. Finally, for faint objects
(SNR around 1 per spectral channel), electromagnetic interferences in the VLTI
interferometric laboratory with the detector electronics prevents currently to
get unbiased measurements. Ideas are under study to correct in the data
processing side this effect, but a hardware fix should be investigated
seriously since it limits seriously the effective limiting magnitude of the
instrument.Comment: 10 page
AMBER/VLTI observations of the B[e] star MWC 300
Aims. We study the enigmatic B[e] star MWC 300 to investigate its disk and
binary with milli-arcsecond-scale angular resolution. Methods. We observed MWC
300 with the VLTI/AMBER instrument in the H and K bands and compared these
observations with temperature-gradient models to derive model parameters.
Results. The measured low visibility values, wavelength dependence of the
visibilities, and wavelength dependence of the closure phase directly suggest
that MWC 300 consists of a resolved disk and a close binary. We present a model
consisting of a binary and a temperature-gradient disk that is able to
reproduce the visibilities, closure phases, and spectral energy distribution.
This model allows us to constrain the projected binary separation (~4.4 mas or
~7.9 AU), the flux ratio of the binary components (~2.2), the disk temperature
power-law index, and other parameters.Comment: 4 pages, 1 figure, accepted by A&
A catalogue of stellar diameters and fluxes for mid-infrared interferometry
We present the Mid-infrared stellar Diameters and Fluxes compilation infrared wavelengths (3-13 μm). It gathers data for half a millio stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whos spectral type is reported in the SIMBAD data base. We cross-match 2 data bases to provide basic information, binarity elements, angula diameter, magnitude and flux in the near and mid-infrared, as well a flags that allow us to identify the potential calibrators. The catalogu covers the entire sky with 465 857 stars, mainly dwarfs and giants fro B to M spectral types closer than 18 kpc. The smallest reported value reach 0.16 μJy in L and 0.1 μJy in N for the flux, and 2 microarcsec fo the angular diameter. We build four lists of calibrator candidates fo the L and Nbands suitable with the Very Large Telescope Interferomete (VLTI) sub- and main arrays using the MATISSE instrument. We identif 1621 candidates for L and 44 candidates for N with the Auxiliar Telescopes (ATs), 375 candidates for both bands with the ATs, and 25 candidates for both bands with the Unit Telescopes (UTs). Predominantl cool giants, these sources are small and bright enough to belong to th primary lists of calibrator candidates. In the near future, we plan t measure their angular diameter with 1 per cent accurac
First results from VLTI near-infrared interferometry on high-mass young stellar objects
This is the author accepted manuscript. The final version is available from SPIE via the DOI in this record.Due to the recent dramatic technological advances, infrared interferometry can now be applied to new classes of objects, resulting in exciting new science prospects, for instance, in the area of high-mass star formation. Although extensively studied at various wavelengths, the process through which massive stars form is still only poorly understood. For instance, it has been proposed that massive stars might form like low-mass stars by mass accretion through a circumstellar disk/envelope, or otherwise by coalescence in a dense stellar cluster. Therefore, clear observational evidence, such as the detection of disks around high-mass young stellar objects (YSOs), is urgently needed in order to unambiguously identify the formation mode of the most massive stars. After discussing the technological challenges which result from the special properties of these objects, we present first near-infrared interferometric observations, which we obtained on the massive YSO IRAS 13481-6124 using VLTI/AMBER infrared long-baseline interferometry and NTT speckle interferometry. From our extensive data set, we reconstruct a model-independent aperture synthesis image which shows an elongated structure with a size of ~ 13 x 19 AU, consistent with a disk seen under an inclination of - 45°. The measured wavelengthdependent visibilities and closure phases allow us to derive the radial disk temperature gradient and to detect a dust-free region inside of 9.5 AU from the star, revealing qualitative and quantitative similarities with the disks observed in low-mass star formation. In complementary mid-infrared Spitzer and sub-millimeter APEX imaging observations we detect two bow shocks and a molecular outflow, which are oriented perpendicular to the disk plane and indicate the presence of a bipolar outflow emanating from the inner regions of the system.This work was performed in part under contract with the California Institute of Technology (Caltech) funded by
NASA through the Sagan Fellowship Program
A hot compact dust disk around a massive young stellar object
This is the author accepted manuscript. The final version is available from the publisher via the DOI in this record.Circumstellar disks are an essential ingredient of the formation of low-mass stars. It is unclear, however, whether the accretion-disk paradigm can also account for the formation of stars more massive than about 10 solar masses, in which strong radiation pressure might halt mass infall. Massive stars may form by stellar merging, although more recent theoretical investigations suggest that the radiative-pressure limit may be overcome by considering more complex, non-spherical infall geometries. Clear observational evidence, such as the detection of compact dusty disks around massive young stellar objects, is needed to identify unambiguously the formation mode of the most massive stars. Here we report near-infrared interferometric observations that spatially resolve the astronomical-unit-scale distribution of hot material around a high-mass ( approximately 20 solar masses) young stellar object. The image shows an elongated structure with a size of approximately 13 x 19 astronomical units, consistent with a disk seen at an inclination angle of approximately 45 degrees . Using geometric and detailed physical models, we found a radial temperature gradient in the disk, with a dust-free region less than 9.5 astronomical units from the star, qualitatively and quantitatively similar to the disks observed in low-mass star formation. Perpendicular to the disk plane we observed a molecular outflow and two bow shocks, indicating that a bipolar outflow emanates from the inner regions of the system.This work was done in part under contract with the California Institute of Technology (Caltech), funded by NASA through the Sagan Fellowship Program (S.K. is a Sagan Fellow). We thank the ESO Paranal staff for support and their efforts in improving the VLTI. This paper is based on observations made with ESO telescopes at the La Silla Paranal Observatory and archival data obtained with the Spitzer Space Telescope, operated by the Jet Propulsion Laboratory, Caltech, under a contract with NASA. We also used data acquired with APEX, a collaboration between the Max-Planck-Institut für Radioastronomie, ESO, and the Onsala Space Observatory
Near-infrared interferometric observation of the Herbig Ae star HD144432 with VLTI/AMBER
We study the sub-AU-scale circumstellar environment of the Herbig Ae star
HD144432 with near-infrared (NIR) VLTI/AMBER observations to investigate the
structure of its inner dust disk. The interferometric observations were carried
out with the AMBER instrument in the H and K band. We interpret the measured H-
and K-band visibilities, the near- and mid-infrared visibilities from the
literature, and the SED of HD144432 by using geometric ring models and
ring-shaped temperature-gradient disk models with power-law temperature
distributions. We derived a K-band ring-fit radius of 0.17 \pm 0.01 AU and an
H-band radius of 0.18 \pm 0.01 AU (for a distance of 145 pc). This measured
K-band radius of \sim0.17 AU lies in the range between the dust sublimation
radius of \sim0.13 AU (predicted for a dust sublimation temperature of 1500 K
and gray dust) and the prediction of models including backwarming (\sim0.27
AU). We found that an additional extended halo component is required in both
the geometric and temperature-gradient modeling. In the best temperature-
gradient model, the disk consists of two components. The inner part of the disk
is a thin ring with an inner radius of \sim0.21 AU, a temperature of \sim1600
K, and a ring thickness \sim0.02 AU. The outer part extends from \sim1 AU to
\sim10 AU with an inner temperature of \sim400 K. We find that the disk is
nearly face-on with an inclination angle of < 28 degree. Our
temperature-gradient modeling suggests that the NIR excess is dominated by
emission from a narrow, bright rim located at the dust sublimation radius,
while an extended halo component contributes \sim6% to the total flux at 2
{\mu}m. The MIR model emission has a two-component structure with \sim20% flux
from the inner ring and the rest from the outer part. This two-component
structure suggests a disk gap, which is possibly caused by the shadow of a
puffed-up inner rim.Comment: 7 pages, 5 figures, accepted by A&
First VLTI/MIDI observations of a Be star: Alpha Ara
We present the first VLTI/MIDI observations of the Be star Alpha Ara, showing
a nearly unresolved circumstellar disk in the N band. The interferometric
measurements made use of the UT1 and UT3 telescopes. The projected baselines
were 102 and 74 meters with position angles of 7 degres and 55 degres,
respectively. These measurements put an upper limit to the envelope size in the
N band under the Uniform disk approximation of mas,
corresponding to 14 , assuming =4.8 and
the Hipparcos distance of 74pc. On the other hand the disk density must be
large enough to produce the observed strong Balmer line emission. In order to
estimate the possible circumstellar and stellar parameters we have used the
SIMECA code developed by Stee (1995) and Stee & Bittar (2001). Optical spectra
taken with the echelle instrument Heros and the ESO-50cm telescope, as well as
infrared ones from the 1.6m Brazilian telescope have been used together with
the MIDI spectra and visibilities. These observations put complementary
constraints on the density and geometry of Alpha Ara circumstellar disk. We
discuss on the potential truncation of the disk by a companion and we present
spectroscopic indications of a periodic perturbation of some Balmer lines.Comment: Accepted in A&
Strong near-infrared emission in the sub-AU disk of the Herbig Ae star HD 163296: evidence of refractory dust?
This is the author accepted manuscript. The final version is available from EDP Sciences via the DOI in this record.We present new long-baseline spectro-interferometric observations of the Herbig Ae star HD 163296 (MWC 275) obtained in the
H and K bands with the AMBER instrument at the VLTI. The observations cover a range of spatial resolutions between ∼3 and
∼12 milliarcseconds, with a spectral resolution of ∼30. With a total of 1481 visibilities and 432 closure phases, they represent the
most comprehensive (u, v) coverage achieved so far for a young star. The circumstellar material is resolved at the sub-AU spatial scale
and closure phase measurements indicate a small but significant deviation from point-symmetry. We discuss the results assuming that
the near-infrared excess in HD 163296 is dominated by the emission of a circumstellar disk. A successful fit to the spectral energy
distribution, near-infrared visibilities and closure phases is found with a model in which a dominant contribution to the H and K band
emission originates in an optically thin, smooth and point-symmetric region extending from about 0.1 to 0.45 AU. At a distance of
0.45 AU from the star, silicates condense, the disk becomes optically thick and develops a puffed-up rim, whose skewed emission can
account for the non-zero closure phases. We discuss the source of the inner disk emission and tentatively exclude dense molecular gas
as well as optically thin atomic or ionized gas as its possible origin. We propose instead that the smooth inner emission is produced by
very refractory grains in a partially cleared region, extending to at least ∼0.5 AU. If so, we may be observing the disk of HD 163296
just before it reaches the transition disk phase. However, we note that the nature of the refractory grains or, in fact, even the possibility
of any grain surviving at the very high temperatures we require (∼2100−2300 K at 0.1 AU from the star) is unclear and should be
investigated further.We acknowledge fundings from CNRS and INAF (grant
ASI-INAF I/016/07/0). This work was in part performed under contract with
the Jet Propulsion Laboratory (JPL) funded by NASA through the Michelson
Fellowship Progra
Strong near-infrared emission in the sub-AU disk of the Herbig Ae star HD163296: evidence for refractory dust?
We present new long-baseline spectro-interferometric observations of the
HerbigAe star HD163296 obtained in the H and K bands with the AMBER instrument
at VLTI. The observations cover a range of spatial resolutions between 3 and 12
milli-arcseconds, with a spectral resolution of ~30. With a total of 1481
visibilities and 432 closure phases, they result in the best (u,v) coverage
achieved on a young star so far. The circumstellar material is resolved at the
sub-AU spatial scale and closure phase measurements indicate a small but
significant deviation from point-symmetry. We discuss the results assuming that
the near-infrared excess in HD163296 is dominated by the emission of a
circumstellar disk. A successful fit to the spectral energy distribution,
near-infrared visibilities and closure phases is found with a model where a
dominant contribution to the H and K band emissions arises from an optically
thin, smooth and point-symmetric region extending from about 0.1 to 0.45 AU. At
the latter distance from the star, silicates condense, the disk becomes
optically thick and develops a puffed-up rim, whose skewed emission can account
for the non-zero closure phases. We discuss the nature of the inner disk
emission and tentatively rule out dense molecular gas as well as optically thin
atomic or ionized gas as its possible origin. We propose instead that the inner
emission traces the presence of very refractory grains in a partially cleared
region, extending at least to 0.5 AU. If so, we may be observing the disk of
HD163296 just before it reaches the transition disk phase. However, we note
that the nature of the refractory grains or even the possibility for any grain
to survive at the very high temperatures we require (~2100-2300 K at 0.1 AU
from the star) is unclear and should be investigated further.Comment: 14 pages; 12 figures; accepted by A&
First AMBER/VLTI observations of hot massive stars
AMBER is the first near infrared focal instrument of the VLTI. It combines
three telescopes and produces spectrally resolved interferometric measures.
This paper discusses some preliminary results of the first scientific
observations of AMBER with three Unit Telescopes at medium (1500) and high
(12000) spectral resolution. We derive a first set of constraints on the
structure of the circumstellar material around the Wolf Rayet Gamma2 Velorum
and the LBV Eta Carinae
- …