31,130 research outputs found
Microbiological surface sampling cart
Mobile sampling cart automatically swabs surfaces for the recovery of microorganisms. Unit operates without human involvement and provides for control of swabbing speed, rotation of cotton swab, and the pressure and angle applied to swab. Capability of reverse direction is also available. Sampling cart use is limited to flat surfaces
Automated single-slide staining device
A simple apparatus and method is disclosed for making individual single Gram stains on bacteria inoculated slides to assist in classifying bacteria in the laboratory as Gram-positive or Gram-negative. The apparatus involves positioning a single inoculated slide in a stationary position and thereafter automatically and sequentially flooding the slide with increments of a primary stain, a mordant, a decolorizer, a counterstain and a wash solution in a sequential manner without the individual lab technician touching the slide and with minimum danger of contamination thereof from other slides
Apparatus for microbiological sampling
An automatic apparatus is described for microbiologically sampling surface using a cotton swab which eliminates human error. The apparatus includes a self-powered transport device, such as a motor-driven wheeled cart, which mounts a swabbing motor drive for a crank arm which supports a swab in the free end thereof. The swabbing motor is pivotably mounted and an actuator rod movable responsive to the cart traveling a predetermined distance provides lifting of the swab from the surface being sampled and reversal of the direction of travel of the cart
Automated single-slide staining system
Apparatus developed to Gram-stain single slides automatically is flexible enough to accommodate other types of staining procedures. Method frees operator and eliminates necessity for subjective evaluations as to length of staining or decolorizing time
Automatic microbial transfer
Device can transfer metabolites or inhibitory agents to broth cultures of bacteria, in various stages of growth, for study. It also has application in transfer of other micro-organisms, such as yeasts, and could be useful in clinical and research laboratories. Device has been used for wide variety of purposes in experimental situations
Automatic agar tray inoculation device
Automatic agar tray inoculation device is simple in design and foolproof in operation. It employs either conventional inoculating loop or cotton swab for uniform inoculation of agar media, and it allows technician to carry on with other activities while tray is being inoculated
Measuring micro-organism gas production
Transducer, which senses pressure buildup, is easy to assemble and use, and rate of gas produced can be measured automatically and accurately. Method can be used in research, in clinical laboratories, and for environmental pollution studies because of its ability to detect and quantify rapidly the number of gas-producing microorganisms in water, beverages, and clinical samples
Transverse microcracking in Celion 6000/PMR-15 graphite-polyimide
The effects of room temperature tensile loading and five thermal loadings, in the range -320 F (-196C) to 625F (330CC), upon the development of transverse microcracks (TVM) in Celion 6000/PMR-15 graphite-polyimide laminates were investigated. Microcracks were observed using a replicating technique, microscopy and X-ray. The mechanical or thermal load at which microcracking initiates and the ply residual stresses were predicted using laminate analysis with stress- and temperature-dependent material properties
Deep learning with convolutional neural networks for decoding and visualization of EEG pathology
We apply convolutional neural networks (ConvNets) to the task of
distinguishing pathological from normal EEG recordings in the Temple University
Hospital EEG Abnormal Corpus. We use two basic, shallow and deep ConvNet
architectures recently shown to decode task-related information from EEG at
least as well as established algorithms designed for this purpose. In decoding
EEG pathology, both ConvNets reached substantially better accuracies (about 6%
better, ~85% vs. ~79%) than the only published result for this dataset, and
were still better when using only 1 minute of each recording for training and
only six seconds of each recording for testing. We used automated methods to
optimize architectural hyperparameters and found intriguingly different ConvNet
architectures, e.g., with max pooling as the only nonlinearity. Visualizations
of the ConvNet decoding behavior showed that they used spectral power changes
in the delta (0-4 Hz) and theta (4-8 Hz) frequency range, possibly alongside
other features, consistent with expectations derived from spectral analysis of
the EEG data and from the textual medical reports. Analysis of the textual
medical reports also highlighted the potential for accuracy increases by
integrating contextual information, such as the age of subjects. In summary,
the ConvNets and visualization techniques used in this study constitute a next
step towards clinically useful automated EEG diagnosis and establish a new
baseline for future work on this topic.Comment: Published at IEEE SPMB 2017 https://www.ieeespmb.org/2017
An investigation into the effect of thickness of titanium dioxide and gold-silver nanoparticle titanium dioxide composite thin-films on photocatalytic activity and photo-induced oxygen production in a sacrificial system
Thin films of titanium dioxide and titanium dioxide with incorporated gold and silver nanoparticles were deposited onto glass microscope slides, steel and titanium foil coupons by two sol–gel dip-coating methods. The film's photocatalytic activity and ability to evolve oxygen in a sacrificial solution were assessed. It was found that photocatalytic activity increased with film thickness (from 50 to 500 nm thick samples) for the photocatalytic degradation of methylene blue in solution and resazurin redox dye in an intelligent ink dye deposited on the surface. Contrastingly, an optimum film thickness of [similar]200 nm for both composite and pure films of titanium dioxide was found for water oxidation, using persulfate (S2O82−) as a sacrificial electron acceptor. The nanoparticle composite films showed significantly higher activity in oxygen evolution studies compared with plain TiO2 films
- …