780 research outputs found
A Systems-Based Framework for the Assessment of Performance Measurement System Implementations in R&D Organizations
Performance measurement is utilized by organizations in all industries, including research and development (R&D). Measures are developed, data are collected, and the measurement results are used to drive the organization. The implicit hope is, of course, that the measures drive the organization to improve. However, literature identifies high failure rates directly related to performance measurement system (PMS) implementations. Establishing the fundamental operational characteristics associated with successful PMSs would provide a significant contribution towards the establishment of PMS assessment criteria. This research addresses this gap through the use of a grounded theory method employed to identify these operational characteristics, assesses the findings against systems theory concepts, and produces a practical assessment framework for R&D PMSs.
A grounded theory method was used to identify a theoretical construct of operational characteristics. These operational characteristics were then compared to systems theory axioms and principles to evaluate them in terms of systems complexity. These two steps provided a comprehensive basis for a systems-based assessment of R&D PMS implementations. Finally, the research introduces a framework for assessment, using maturity levels, as a practical contribution by aligning the theoretically-derived operational characteristics and an adaptation of the Capability Maturity Model. The systems-based R&D PMS implementation assessment framework provides practitioners with a means to assess the current state of their PMS implementation and provides guidance needed for them to improve their PMS
Executive Summary of Ares V: Lunar Capabilities Concept Review Through Phase A-Cycle 3
This Technical Memorandum (TM) was generated as an overall Ares V summary from the Lunar Capabilities Concept Review (LCCR) through Phase A-Cycle 3 (PA-C3) with the intent that it may be coupled with separately published appendices for a more detailed, integrated narrative. The Ares V has evolved from the initial point of departure (POD) 51.00.48 LCCR configuration to the current candidate POD, PA-C3D, and the family of vehicles concept that contains vehicles PA-C3A through H. The logical progression from concept to POD vehicles is summarized in this TM and captures the trade space and performance of each. The family-of-vehicles concept was assessed during PA-C3 and offered flexibility in the path forward with the ability to add options deemed appropriate. A description of each trade space is given in addition to a summary of each Ares V element. The Ares V contributions to a Mars campaign are also highlighted with the goal of introducing Ares V capabilities within the trade space. The assessment of the Ares V vehicle as it pertains to Mars missions remained locked to the architecture presented in Mars Design Reference Authorization 5.0 using the PA-C3D vehicle configuration to assess Mars transfer vehicle options, in-space EDS capabilities, docking adaptor and propellant transfer assessments, and lunar and Mars synergistic potential
Generalized multiresolution analyses with given multiplicity functions
Generalized multiresolution analyses are increasing sequences of subspaces of
a Hilbert space \H that fail to be multiresolution analyses in the sense of
wavelet theory because the core subspace does not have an orthonormal basis
generated by a fixed scaling function. Previous authors have studied a
multiplicity function which, loosely speaking, measures the failure of the
GMRA to be an MRA. When the Hilbert space \H is , the
possible multiplicity functions have been characterized by Baggett and Merrill.
Here we start with a function satisfying a consistency condition which is
known to be necessary, and build a GMRA in an abstract Hilbert space with
multiplicity function .Comment: 16 pages including bibliograph
Construction of Parseval wavelets from redundant filter systems
We consider wavelets in L^2(R^d) which have generalized multiresolutions.
This means that the initial resolution subspace V_0 in L^2(R^d) is not singly
generated. As a result, the representation of the integer lattice Z^d
restricted to V_0 has a nontrivial multiplicity function. We show how the
corresponding analysis and synthesis for these wavelets can be understood in
terms of unitary-matrix-valued functions on a torus acting on a certain vector
bundle. Specifically, we show how the wavelet functions on R^d can be
constructed directly from the generalized wavelet filters.Comment: 34 pages, AMS-LaTeX ("amsproc" document class) v2 changes minor typos
in Sections 1 and 4, v3 adds a number of references on GMRA theory and
wavelet multiplicity analysis; v4 adds material on pages 2, 3, 5 and 10, and
two more reference
SPACE TELESCOPE SCIENCE
We present the results and measurement of Charge Transfer Efficiency (CTE) of the WFC3 UVIS detector, based on data acquired during the monthly internal Extended Pixel Edge Response (EPER) observations over a 2 year period. We present an algorithm for CTE assessment and fit a power-law to CTE measures versus signal level. We find that at each signal level, CTE declines linearly over time and CTE losses are worst at the lowest signal levels. 1
Irrigated lands assessment for water management: Technique test
A procedure for estimating irrigated land using full frame LANDSAT imagery was demonstrated. Relatively inexpensive interpretation of multidate LANDSAT photographic enlargements was used to produce a map of irrigated land in California. The LANDSAT and ground maps were then linked by regression equations to enable precise estimation of irrigated land area by county, basin, and statewide. Land irrigated at least once in California in 1979 was estimated to be 9.86 million acres, with an expected error of less than 1.75% at the 99% level of confidence. To achieve the same level of error with a ground-only sample would have required 3 to 5 times as many ground sample units statewide. A procedure for relatively inexpensive computer classification of LANDSAT digital data to irrigated land categories was also developed. This procedure is based on ratios of MSS band 7 and 5, and gave good results for several counties in the Central Valley
Images and Spectral Performance of WFC3 Interference Filters
The Wide Field Camera 3 (WFC3) is a panchromatic imager that will be deployed in the Hubble Space Telescope (HST). The mission of the WFC3 is to enhance HST1s imaging capability in the ultraviolet, visible and near-infrared spectral regions. Together with a wavelength coverage spanning 2000A to 1.7 micron, the WFC3 high sensitivity, high spatial resolution, and large field-of-view provide the astronomer with an unprecedented set of tools for exploring all types of exciting astrophysical terrain and for addressing many key questions in astronomy today. The filter compliment, which includes broad, medium, and narrow band filters, naturally reflects the diversity of astronomical programs to be targeted with WFC3. The WFC3 holds 61 UVIS filters elements, 14 IR filters, and 3 dispersive elements. During ground testing, the majority of the UVIS filters were found to exhibit excellent performance consistent with or exceeding expectations; however, a subset of filters showed considerable ghost images; some with relative intensity as high as 10-15%. Replacement filters with band-defining coatings that substantially reduce these ghost images were designed and procured. A state-of-the-art characterization setup was developed to measured the intensity of ghost images, focal shift, wedge direction , transmitted uniformity and surface feature of filters that could effect uniform flat field images. We will report on this new filter characterization methods, as well as the spectral performance measurements of the in-band transmittance and blocking
The demographic consequences of growing older and bigger in oyster populations
Structured population models, particularly size-or age-structured, have a long history of informing conservation and natural resource management. While size is often easier to measure than age and is the focus of many management strategies, age-structure can have important effects on population dynamics that are not captured in size-only models. However, relatively few studies have included the simultaneous effects of both age-and size-structure. To better understand how population structure, particularly that of age and size, impacts restoration and management decisions, we developed and compared a size-structured integral projection model (IPM) and an age-and size-structured IPM, using a population of Crassostrea gigas oysters in the northeastern Pacific Ocean. We analyzed sensitivity of model results across values of local retention that give populations decreasing in size to populations increasing in size. We found that age-and size-structured models yielded the best fit to the demographic data and provided more reliable results about long-term demography. Elasticity analysis showed that population growth rate was most sensitive to changes in the survival of both large (\u3e175 mm shell length) and small (length) oysters, indicating that a maximum size limit, in addition to a minimum size limit, could be an effective strategy for maintaining a sustainable population. In contrast, the purely size-structured model did not detect the importance of large individuals. Finally, patterns in stable age and stable size distributions differed between populations decreasing in size due to limited local retention and populations increasing in size due to high local retention. These patterns can be used to determine population status and restoration success. The methodology described here provides general insight into the necessity of including both age-and size-structure into modeling frameworks when using population models to inform restoration and management decisions
- …