5,511 research outputs found
PACS and SPIRE photometer maps of M 33: First results of the HERschel M 33 Extended Survey (HERM33ES)
Context. Within the framework of the HERM33ES key program, we are studying the star forming interstellar medium in the nearby, metal-poor spiral galaxy M 33, exploiting the high resolution and sensitivity of Herschel.
Aims. We use PACS and SPIRE maps at 100, 160, 250, 350, and 500 μm wavelength, to study the variation of the spectral energy distributions (SEDs) with galacto-centric distance.
Methods. Detailed SED modeling is performed using azimuthally averaged fluxes in elliptical rings of 2 kpc width, out to 8 kpc galacto-centric distance. Simple isothermal and two-component grey body models, with fixed dust emissivity index, are fitted to the SEDs between 24 μm and 500 μm using also MIPS/Spitzer  data, to derive first estimates of the dust physical conditions.
Results. The far-infrared and submillimeter maps reveal the branched, knotted spiral structure of M 33. An underlying diffuse disk is seen in all SPIRE maps (250–500 μm). Two component fits to the SEDs agree better than isothermal models with the observed, total and radially averaged flux densities. The two component model, with β fixed at 1.5, best fits the global and the radial SEDs. The cold dust component clearly dominates; the relative mass of the warm component is less than 0.3% for all the fits. The temperature of the warm component is not well constrained and is found to be about 60 K ± 10 K. The temperature of the cold component drops significantly from ~24 K in the inner 2 kpc radius to 13 K beyond 6 kpc radial distance, for the best fitting model. The gas-to-dust ratio for β = 1.5, averaged over the galaxy, is higher than the solar value by a factor of 1.5 and is roughly in agreement with the subsolar metallicity of M 33
Authorization and access control of application data in Workflow systems
Workflow Management Systems (WfMSs) are used to support the modeling and coordinated execution of business processes within an organization or across organizational boundaries. Although some research efforts have addressed requirements for authorization and access control for workflow systems, little attention has been paid to the requirements as they apply to application data accessed or managed by WfMSs. In this paper, we discuss key access control requirements for application data in workflow applications using examples from the healthcare domain, introduce a classification of application data used in workflow systems by analyzing their sources, and then propose a comprehensive data authorization and access control mechanism for WfMSs. This involves four aspects: role, task, process instance-based user group, and data content. For implementation, a predicate-based access control method is used. We believe that the proposed model is applicable to workflow applications and WfMSs with diverse access control requirements
Self-consistency of the Excursion Set Approach
The excursion set approach provides a framework for predicting how the
abundance of dark matter halos depends on the initial conditions. A key
ingredient of this formalism comes from the physics of halo formation: the
specification of a critical overdensity threshold (barrier) which protohalos
must exceed if they are to form bound virialized halos at a later time. Another
ingredient is statistical, as it requires the specification of the appropriate
statistical ensemble over which to average when making predictions. The
excursion set approach explicitly averages over all initial positions, thus
implicitly assuming that the appropriate ensemble is that associated with
randomly chosen positions in space, rather than special positions such as peaks
of the initial density field. Since halos are known to collapse around special
positions, it is not clear that the physical and statistical assumptions which
underlie the excursion set approach are self-consistent. We argue that they are
at least for low mass halos, and illustrate by comparing our excursion set
predictions with numerical data from the DEUS simulations.Comment: 5 pages, 2 figure
Development of a Flame Resistant Silicone Rubber
Flame resistant silicone rubber using aluminum silicates and aromatic bromide
Biological treatment of heavy metals using sulfate-reducing bacteria.
The use of sulfate reducing bacteria, SRB, showed promising results in removing heavy metals partly by sulfides precipitation and partly by biosorption, simultaneously, in upflow anaerobic fixed film reactors, UAFFRs, for different hydraulic retention times, HRTs. The SRB were capable to grow optimally under certain growth conditions for each HRT by utilizing lactate as organic carbon source. The mathematical relations for design of UAFFR for optimum metal removal for different hydraulic retention times, HRTs, have been developed. The first phase (Phase I) of this research studied the occupation and productivity of SRB in the entire reactor height for different hydraulic retention times, HRTs. They were found in almost constant concentrations in the entire height and different for different HRTS, which proves that growth of SRB was achieved in the lowest region (upto 0.3 m). Also, the sulfide concentration were found different at different heights and different for different HRTs, which concludes that the production of sulfide was attained all along the reactor height. A mathematical equation been developed to correlate the sulfide productivity to different reactor heights. In the second phase (Phase II), the performance of SRB in removing heavy metal at different HRTs was studied. Copper was applied in different concentrations, for each HRT, until complete failure of the reactor. The 18 h HRT reactor was capable to remove 90% of over 200 mg/L influent copper, 85% of over 300 mg/L influent copper and 80% of over 400 mg/L influent copper. Whereas, the 9 h HRT reactor removed 87% of over 200 mg/L influent copper, 75% of over 300 mg/L influent copper and 67% of over 400 mg/L influent copper.Dept. of Environmental Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis1998 .S54. Source: Masters Abstracts International, Volume: 39-02, page: 0572. Adviser: J. K. Bewtra. Thesis (M.A.Sc.)--University of Windsor (Canada), 1998
Flame retardant spandex type polyurethanes
Flame retardant elastomeric compositions were developed, comprised of: (1) spandex type polyurethane having incorporated into the polymer chain, halogen containing polyols; (2) conventional spandex type polyurethanes in physical admixture flame retardant additives; and (3) fluoroelastomeric resins in physical admixture with flame retardant additives. Methods of preparing fibers of the flame retardant elastomeric materials are presented and articles of manufacture comprised of the elastomeric materials are mentioned
Flame resistant elastic elastomeric fiber
Compositions exhibit elastomeric properties and possess various degrees of flame resistance. First material polyurethane, incorporates halogen containing polyol and is flame resistant in air; second contains spandex elastomer with flame retardant additives; and third material is prepared from fluorelastomer composition of copolymer of vinylidene fluoride and hexafluoropropylene
Flame resistant elastomeric polymer development
Elastomeric products were developed for use in the space shuttle program, and investigations were conducted to improve the properties of elastomers developed in previous programs, and to evaluate the possibility of using lower-cost general purpose polymers. Products were fabricated and processed on conventional processing equipment; these products include: foams based on fluorinated rubber flame-retarded compounds with a density of 20-30 pounds/cubic foot for use as padding and in helmets; foams based on urethane for use in instrument packaging in the space shuttle; flexible and semi-rigid films of fluorinated rubber and neoprene compounds that would not burn in a 70% nitrogen, 30% oxygen atmosphere, and in a 30% nitrogen, 70% oxygen atmosphere, respectively for use in packaging or in laminates; coated fabrics which used both nylon and Kelvar fabric substrates, coated with either fluorinated or neoprene polymer compositions to meet specific levels of flame retardancy; and other flame-resistant materials
- …