TEACHING IN THE CLOUD MICROELECTRONICS UBIQUITOUS LAB (MULAB)

CAD laboratory students activity is mandatory for microelectronics teaching. This, applied in the deep-submicron era, creates new challenges to couple software management simplicity to user friendliness inside lab sessions, which requires the use of complex tools and concepts. In this paper, a new approach to microelectronics CAD deployment is presented, based on virtualization capabilities of new servers hardware and software technology. A test case, realized at Politecnico di Torino, degree of Electronic Engineering, is presented, with real world results on resource consumption and user satisfaction

A multiprocessor based packet-switch: performance analysis of the communication infrastructure

The intra-chip communication infrastructures are receiving always more attention since they are becoming a crucial part in the development of current SoCs. Due to the high availability of pre-characterized hard-IP, the complexity of the design is moving toward global interconnections which are introducing always more constraints at each technology node. Power consumption, timing closure, bandwidth requirements, time to market, are some of the factors that are leading to the proposal of new solutions for next generation multi-million SoCs. The need of high programmable systems and the high gate-count availability is moving always more attention on multiprocessors systems (MP-SoC) and so an adequate solution must be found for the communication infrastructure. One of the most promising technologies is the Network-On-Chip (NoC) architecture, which seems to better fit with the new demanding complexity of such systems. Before starting to develop new solutions, it is crucial to fully understand if and when current bus architectures introduce strong limitations in the development of high speed systems. This article describes a case study of a multiprocessor based ethernet packet-switch application with a shared-bus communication infrastructure. This system aims to depict all the bottlenecks which a shared-bus introduces under heavy load. What emerges from this analysis is that, as expected, a shared-bus is not scalable and it strongly limits whole system performances. These results strengthen the hypothesis that new communication architectures (like the NoC) must be found

Quantum Dot Cellular Automata Check Node Implementation for LDPC Decoders

The quantum dot Cellular Automata (QCA) is an emerging nanotechnology that has gained significant research interest in recent years. Extremely small feature sizes, ultralow power consumption, and high clock frequency make QCA a potentially attractive solution for implementing computing architectures at the nanoscale. To be considered as a suitable CMOS substitute, the QCA technology must be able to implement complex real-time applications with affordable complexity. Low density parity check (LDPC) decoding is one of such applications. The core of LDPC decoding lies in the check node (CN) processing element which executes actual decoding algorithm and contributes toward overall performance and complexity of the LDPC decoder. This study presents a novel QCA architecture for partial parallel, layered LDPC check node. The CN executes Normalized Min Sum decoding algorithm and is flexible to support CN degree dc up to 20. The CN is constructed using a VHDL behavioral model of QCA elementary circuits which provides a hierarchical bottom up approach to evaluate the logical behavior, area, and power dissipation of the whole design. Performance evaluations are reported for the two main implementations of QCA i.e. molecular and magneti

A case study for NoC based homogeneous MPSoC architectures

The many-core design paradigm requires flexible and modular hardware and software components to provide the required scalability to next-generation on-chip multiprocessor architectures. A multidisciplinary approach is necessary to consider all the interactions between the different components of the design. In this paper, a complete design methodology that tackles at once the aspects of system level modeling, hardware architecture, and programming model has been successfully used for the implementation of a multiprocessor network-on-chip (NoC)-based system, the NoCRay graphic accelerator. The design, based on 16 processors, after prototyping with field-programmable gate array (FPGA), has been laid out in 90-nm technology. Post-layout results show very low power, area, as well as 500 MHz of clock frequency. Results show that an array of small and simple processors outperform a single high-end general purpose processo

Exploiting generalized de-Bruijn/Kautz topologies for flexible iterative channel code decoder architectures

Modern iterative channel code decoder architectures have tight constrains on the throughput but require flexibility to support different modes and standards. Unfortunately, flexibility often comes at the expense of increasing the number of clock cycles required to complete the decoding of a data-frame, thus reducing the sustained throughput. The Network- on-Chip (NoC) paradigm is an interesting option to achieve flexibility, but several design choices, including the topology and the routing algorithm, can affect the decoder throughput. In this work logarithmic diameter topologies, in particular generalized de-Bruijn and Kautz topologies, are addressed as possible solutions to achieve both flexible and high throughput architectures for iterative channel code decoding. In particular, this work shows that the optimal shortest-path routing algorithm for these topologies, that is still available in the open literature, can be efficiently implemented resorting to a very simple circuit. Experimental results show that the proposed architecture features a reduction of about 14% and 10% for area and power consumption respectively, with respect to a previous shortest-path routing-table-based desig

Result-Biased Distributed-Arithmetic-Based Filter Architectures for Approximately Computing the DWT

The discrete wavelet transform is a fundamental block in several schemes for image compression. Its implementation relies on filters that usually require multiplications leading to a relevant hardware complexity. Distributed arithmetic is a general and effective technique to implement multiplierless filters and has been exploited in the past to implement the discrete wavelet transform as well. This work proposes a general method to implement a discrete wavelet transform architecture based on distributed arithmetic to produce approximate results. The novelty of the proposed method relies on the use of result-biasing techniques (inspired by the ones used in fixed-width multiplier architectures), which cause a very small loss of quality of the compressed image (average loss of 0.11 dB and 0.20 dB in terms of PSNR for the 9/7 and 10/18 wavelet filters, respectively). Compared with previously proposed distributed-arithmetic-based architectures for the computation of the discrete wavelet transform, this technique saves from about 20% to 25% of hardware complexity

Low-Complexity Reconfigurable DCT-V Architecture

This brief presents a low-complexity, reconfigurable architecture for the Discrete Cosine Transform (DCT) of type V (DCT-V) of length 32. The proposed architecture can be reconfigured to compute five DCT-V of length 4 with negligible area overhead. As the DCT-V is one of the odd type transforms employed in the Adaptive Multiple Transform (AMT) scheme, the effect of fixed point implementation has been assessed in the Joint Exploration Model (JEM) developed by the JVET group for the Versatile-Video-Coding (VVC) forthcoming standard. Simulation results show that the proposed architecture is not only low-complexity and reconfigurable, but features also imperceptible quality loss. Moreover, when implemented in 90 nm CMOS technology it occupies only 90k eq. gates running at 187 MHz

Investigation of Amperometric Sensing Mechanism in Gold-C60-Gold Molecular Dot

We investigate through simulations the gold–C60–gold molecular junction as a novel single-molecule amperometric gas sensor. We find it promising for NO and NO2 detection in air and at room temperature, with current variations of the order of the microampere, and presenting the potential capability of achieving the single-molecule sensitivity along with selectivity in the presence of common atmospheric gases. Furthermore, and for the first time, we investigate the current modulation mechanism due to target–sensor intermolecular interactions, providing theoretical insights into the functioning and exclusive properties of this novel device. In particular, we show and motivate the peculiar voltage-dependent response of the sensor that we relate to the distinctive mechanism of transport modulation occurring in the presence of a specific target. Finally, we discuss sensing reliability in air and the effects of probable fabrication process variability on sensing performance. Our results motivate future works on molecular dot-based chemical sensors in terms of the sensor–target exclusive interactions and detection principles, oriented to device-level engineering to find optimal operating conditions