3,880 research outputs found
Isotropic, Nematic and Smectic A Phase Behaviour in a Fictitious Field
Phase behaviours of liquid crystals under external fields, conjugate to the
nematic order and smectic order, are studied within the framework of mean field
approximation developed by McMillan. It is found that phase diagrams, of
temperature vs interaction parameter of smectic A order, show several
topologically different types caused by the external fields. The influences of
the field conjugate to the smectic A phase, which is fictitious field, are
precisely discussed.Comment: To be published in J. Phys. Soc. Jpn. vol.73 No.
Electrical Nanoprobing of Semiconducting Carbon Nanotubes using an Atomic Force Microscope
We use an Atomic Force Microscope (AFM) tip to locally probe the electronic
properties of semiconducting carbon nanotube transistors. A gold-coated AFM tip
serves as a voltage or current probe in three-probe measurement setup. Using
the tip as a movable current probe, we investigate the scaling of the device
properties with channel length. Using the tip as a voltage probe, we study the
properties of the contacts. We find that Au makes an excellent contact in the
p-region, with no Schottky barrier. In the n-region large contact resistances
were found which dominate the transport properties.Comment: 4 pages, 5 figure
An epithelial cell destined for apoptosis signals its neighbors to extrude it by an actin- and myosin-dependent mechanism
AbstractBackground: Simple epithelia encase developing embryos and organs. Although these epithelia consist of only one or two layers of cells, they must provide tight barriers for the tissues that they envelop. Apoptosis occurring within these simple epithelia could compromise this barrier. How, then, does an epithelium remove apoptotic cells without disrupting its function as a barrier?Results: We show that apoptotic cells are extruded from a simple epithelium by the concerted contraction of their neighbors. A ring of actin and myosin forms both within the apoptotic cell and in the cells surrounding it, and contraction of the ring formed in the live neighbors is required for apoptotic cell extrusion, as injection of a Rho GTPase inhibitor into these cells completely blocks extrusion. Addition of apoptotic MDCK cells to an intact monolayer induces the formation of actin cables in the cells contacted, suggesting that the signal to form the cable comes from the dying cell. The signal is produced very early in the apoptotic process, before procaspase activation, cell shrinkage, or phosphatidylserine exposure. Remarkably, electrical resistance studies show that epithelial barrier function is maintained, even when large numbers of dying cells are being extruded.Conclusions: We propose that apoptotic cell extrusion is important for the preservation of epithelial barrier function during cell death. Our results suggest that an early signal from the dying cell activates Rho in live neighbors to extrude the apoptotic cell out of the epithelium
A Birefringence Relaxation Determination of Rotational Diffusion of Magnetotactic Bacteria
The orientational relaxation of the magnetotactic bacterium Aquaspirillum magnetotacticum is observed by the decay of the optical birefringence upon switching off an aligning magnetic field. The data yield a rotational diffusion constant Dr ≅ 0.13 s1 and information about cell sizes that is consistent with optical microscopy data
Gene identification for the cblD defect of vitamin B12 metabolism
Background Vitamin B12 (cobalamin) is an essential cofactor in several metabolic pathways. Intracellular conversion of cobalamin to its two coenzymes, adenosylcobalamin in mitochondria and methylcobalamin in the cytoplasm, is necessary for the homeostasis of methylmalonic acid and homocysteine. Nine defects of intracellular cobalamin metabolism have been defined by means of somatic complementation analysis. One of these defects, the cblD defect, can cause isolated methylmalonic aciduria, isolated homocystinuria, or both. Affected persons present with multisystem clinical abnormalities, including developmental, hematologic, neurologic, and metabolic findings. The gene responsible for the cblD defect has not been identified.
Methods We studied seven patients with the cblD defect, and skin fibroblasts from each were investigated in cell culture. Microcell-mediated chromosome transfer and refined genetic mapping were used to localize the responsible gene. This gene was transfected into cblD fibroblasts to test for the rescue of adenosylcobalamin and methylcobalamin synthesis.
Results The cblD gene was localized to human chromosome 2q23.2, and a candidate gene, designated MMADHC (methylmalonic aciduria, cblD type, and homocystinuria), was identified in this region. Transfection of wild-type MMADHC rescued the cellular phenotype, and the functional importance of mutant alleles was shown by means of transfection with mutant constructs. The predicted MMADHC protein has sequence homology with a bacterial ATP-binding cassette transporter and contains a putative cobalamin binding motif and a putative mitochondrial targeting sequence.
Conclusions Mutations in a gene we designated MMADHC are responsible for the cblD defect in vitamin B12 metabolism. Various mutations are associated with each of the three biochemical phenotypes of the disorder
Computer modeling of large asteroid impacts into continental and oceanic sites: Atmospheric, cratering, and ejecta dynamics
Numerous impact cratering events have occurred on the Earth during the last several billion years that have seriously affected our planet and its atmosphere. The largest cratering events, which were caused by asteroids and comets with kinetic energies equivalent to tens of millions of megatons of TNT, have distributed substantial quantities of terrestrial and extraterrestrial material over much or all of the Earth. In order to study a large-scale impact event in detail, computer simulations were completed that model the passage of a 10 km-diameter asteroid through the Earth's atmosphere and the subsequent cratering and ejecta dynamics associated with impact of the asteroid into two different targets, i.e., an oceanic site and a continental site. The calcuations were designed to broadly represent giant impact events that have occurred on the Earth since its formation and specifically represent an impact cratering event proposed to have occurred at the end of Cretaceous time. Calculation of the passage of the asteroid through a U.S. Standard Atmosphere showed development of a strong bow shock that expanded radially outward. Behind the shock front was a region of highly shock compressed and intensely heated air. Behind the asteroid, rapid expansion of this shocked air created a large region of very low density that also expanded away from the impact area. Calculations of the cratering events in both the continental and oceanic targets were carried to 120 s. Despite geologic differences, impacts in both targets developed comparable dynamic flow fields, and by approx. 29 s similar-sized transient craters approx. 39 km deep and approx. 62 km across had formed. For all practical purposes, the atmosphere was nearly completely removed from the impact area for tens of seconds, i.e., air pressures were less than fractions of a bar out to ranges of over 50 km. Consequently, much of the asteroid and target materials were ejected upward into a near vacuum. Effects of secondary volcanism and return of the ocean over hot oceanic crater floor could also be expected to add substantial solid and vaporized material to the atmosphere, but these conditions were not studied
Planetary Radio Interferometry and Doppler Experiment (PRIDE) Technique: a Test Case of the Mars Express Phobos Fly-by. 2. Doppler tracking: Formulation of observed and computed values, and noise budget
Context. Closed-loop Doppler data obtained by deep space tracking networks
(e.g., NASA's DSN and ESA's Estrack) are routinely used for navigation and
science applications. By "shadow tracking" the spacecraft signal, Earth-based
radio telescopes involved in Planetary Radio Interferometry and Doppler
Experiment (PRIDE) can provide open-loop Doppler tracking data when the
dedicated deep space tracking facilities are operating in closed-loop mode
only. Aims. We explain in detail the data processing pipeline, discuss the
capabilities of the technique and its potential applications in planetary
science. Methods. We provide the formulation of the observed and computed
values of the Doppler data in PRIDE tracking of spacecraft, and demonstrate the
quality of the results using as a test case an experiment with ESA's Mars
Express spacecraft. Results. We find that the Doppler residuals and the
corresponding noise budget of the open-loop Doppler detections obtained with
the PRIDE stations are comparable to the closed-loop Doppler detections
obtained with the dedicated deep space tracking facilities
Using conditional kernel density estimation for wind power density forecasting
Of the various renewable energy resources, wind power is widely recognized as one of the most promising. The management of wind farms and electricity systems can benefit greatly from the availability of estimates of the probability distribution of wind power generation. However, most research has focused on point forecasting of wind power. In this paper, we develop an approach to producing density forecasts for the wind power generated at individual wind farms. Our interest is in intraday data and prediction from 1 to 72 hours ahead. We model wind power in terms of wind speed and wind direction. In this framework, there are two key uncertainties. First, there is the inherent uncertainty in wind speed and direction, and we model this using a bivariate VARMA-GARCH (vector autoregressive moving average-generalized autoregressive conditional heteroscedastic) model, with a Student t distribution, in the Cartesian space of wind speed and direction. Second, there is the stochastic nature of the relationship of wind power to wind speed (described by the power curve), and to wind direction. We model this using conditional kernel density (CKD) estimation, which enables a nonparametric modeling of the conditional density of wind power. Using Monte Carlo simulation of the VARMA-GARCH model and CKD estimation, density forecasts of wind speed and direction are converted to wind power density forecasts. Our work is novel in several respects: previous wind power studies have not modeled a stochastic power curve; to accommodate time evolution in the power curve, we incorporate a time decay factor within the CKD method; and the CKD method is conditional on a density, rather than a single value. The new approach is evaluated using datasets from four Greek wind farms
Influence of Homeotropic Anchoring Walls upon Nematic and Smectic Phases
McMillan liquid crystal model sandwiched between strong homeotropic anchoring
walls is studied. Phase transitions between isotropic, nematic, and smectic A
phases are investigated for wide ranges of an interaction parameter and of the
system thickness. It is confirmed that the anchoring walls induce an increase
in transition temperatures, dissappearance of phase transitions, and an
appearance of non-spontaneous nematic phase. The similarity between influence
of anchoring walls and that of external fields is discussed.Comment: 5 pages, 6 figure
- …