Forage Yield and Quality of Signal Grass-Clitoria Mixture Grazed at Different Frequencies

A Signal grass-Clitoria mixture provides good quality forage in the dry tropic of southern Mexico. Grazing frequency is a management tool that determines yield, botanical components and quality of pastures. The objective of this study was to determine forage yield, quality and botanical components in a Signal grass (Brachiaria decumbens)-Clitoria (Clitoria ternatea) mixture when grazed at different frequencies

Design of a large scale flow-meter test and calibration facility

The design and set up of a large-scale flowmeter calibration and test facility is presented. The facility was designed to handle flowmeters with diameters between 6” and 14”, flow rates up to 0.3 m3/s and to give results less than 1% accurate. The calibration methodology consisted firstly in calibrating the pattern flowmeters, using volume and time primary measurements, and secondly, comparing the pattern to the flowmeters needing calibration. The design and calculation of the primary calibration device is addressed, including numerical simulations of the outflow manifold and the comparison to experimental data. The calibration facility proved to be accurate and reliable in producing renewed calibration data for various tested flowmeter

Design of a flow deflector for an accurate flow meter calibration facility

The design and test of a flow deflector gate used for controlling the flow deviation toward the primary tank in a flow-meter calibration facility is presented. The deflector gate is pneumatically controlled and permits the flow conduction to either the suction tank or to the primary tank. The deflector is designed to approximately compensate the flow deficit towards the primary tank during the opening, with the flow excess while in the shutting process. Numerical simulations are performed to study the flow hydrodynamics during the deflector operation. Results are compared to experimental data, and used to improve the gate design. The enhanced design proved to guarantee the uniformity of the flow through the calibration section and the dramatic reduction of the error in volume measurement during calibration

Design of the distribution manifold for a large-scale flowmeter calibration facility

The design and test of the distribution manifold for a large-scale flowmeter calibration facility is presented. The design was intended to have an air-free flow operation and a free-surface flow-like towards the downstream half-body discharge. Back of the envelope calculations are presented for the estimation of the preliminary dimensions. Numerical simulations of the flow during manifold steady state operation are utilized to refine the manifold design. No air entrapment is noticed in the flow simulatio

Design of a large scale flow-meter test and calibration facility

The design and set up of a large-scale flowmeter calibration and test facility is presented. The facility was designed to handle flowmeters with diameters between 6” and 14”, flow rates up to 0.3 m3/s and to give results less than 1% accurate. The calibration methodology consisted firstly in calibrating the pattern flowmeters, using volume and time primary measurements, and secondly, comparing the pattern to the flowmeters needing calibration. The design and calculation of the primary calibration device is addressed, including numerical simulations of the outflow manifold and the comparison to experimental data. The calibration facility proved to be accurate and reliable in producing renewed calibration data for various tested flowmeter

Edge detection algorithm based on fuzzy logic theory for a local vision system of robocup humanoid league

Este artículo presenta el desarrollo de un algoritmo para la extracción de bordes basado en la teoría de lógica difusa, mediante el cual es posible reconocer las marcas de un campo de juego para la liga humanoide de RoboCup. El algoritmo propuesto describe la creación de un sistema de inferencia difuso que permite evaluar la relación existente entre los pixeles de una imagen, encontrando así las variaciones en los niveles de gris para una vecindad de pixeles específica. Posteriormente se plantea la implementación del método OTSU para binarizar la imagen obtenida en el proceso difuso y así generar una imagen que contiene solo los bordes extraídos, validando el algoritmo en imágenes de la liga humanoide. Luego se analizan los resultados obtenidos evidenciando el buen desempeño del algoritmo, considerando que el tiempo de procesamiento de la propuesta es tan solo el 35% más del tiempo necesario en métodos tradicionales, mientras que los bordes extraídos son unos 52% menos susceptibles al ruido.At this paper we shown the development of an algorithm to perform edges extraction based on fuzzy logic theory. This method allows recognizing landmarks on the game field for Humanoid League of RoboCup. The proposed algorithm describes the creation of a fuzzy inference system that permit evaluate the existent relationship between image pixels, finding variations on grey levels of related neighbor pixels. Subsequently, it shows an implementation of OTSU method to binarize an image that was obtained from fuzzy process and so generate an imagecontaining only extracted edges, validating the algorithm with Humanoid League images. Later, we analyze obtained results that evidence a good performance of algorithm, considering that this proposal only takes an extra 35% processing time that will be required by traditional methods, whereas extracted edges are 52% less noise susceptible

Design of an Instrument to Evaluate Organizational Design Characteristics Based on the Organizational Configuration Model

The purpose of this article was to design and validate an instrument to determine relevant variables of the business environment, demeanor, and organizational behaviors linked to the Organizational Configuration Model and its relevance in these tumultuous times driven by the pandemic. From the literature, fifty-nine organizational attributes were extracted and administered to a random sample of 160 managers. Using a combined approach, i.e., exploratory factor analysis and construct validity, a structure of eight factors were extracted that explained 66.3 percent of the total variance with an exhibited satisfactory sample adequacy for the factor analysis (KMO = 0.63). An instrument was designed with these eight factors that provided a focused and valid perspective capable of assessing the impact and continued viability of a business’s organizational configuration under unsettled economic times. © Common Ground Research Networks, Ronald R. Rojas, Oriana Susana Martinez Palomino, Jorge Luis Villalba Acevedo, Alberto Emilio Gómez Torres, All Rights Reserved

Two-bath model for activated surface diffusion of interacting adsorbates

The diffusion and low vibrational motions of adsorbates on surfaces can be well described by a purely stochastic model, the so-called interacting single adsorbate model, for low-moderate coverages (\theta \lesssim 0.12). Within this model, the effects of thermal surface phonons and adsorbate-adsorbate collisions are accounted for by two uncorrelated noise functions which arise in a natural way from a two-bath model based on a generalization of the one-bath Caldeira-Leggett Hamiltonian. As an illustration, the model is applied to the diffusion of Na atoms on a Cu(001) surface with different coverages.Comment: 7 pages, 3 figure

Quantum Zeno and anti-Zeno effects in surface diffusion of interacting adsorbates

Surface diffusion of interacting adsorbates is here analyzed within the context of two fundamental phenomena of quantum dynamics, namely the quantum Zeno effect and the anti-Zeno effect. The physical implications of these effects are introduced here in a rather simple and general manner within the framework of non-selective measurements and for two (surface) temperature regimes: high and very low (including zero temperature). The quantum intermediate scattering function describing the adsorbate diffusion process is then evaluated for flat surfaces, since it is fully analytical in this case. Finally, a generalization to corrugated surfaces is also discussed. In this regard, it is found that, considering a Markovian framework and high surface temperatures, the anti-Zeno effect has already been observed, though not recognized as such.Comment: 17 pages, 1 figur