45 research outputs found
Origin of Central Andean collapse calderas
Regional strains in tectonically active
volcanic provinces may have a profound
influence on the mode of collapse caldera
formation. Conversely, the deformation
pattern, more specifically, the symmetry
of plan-view strain fields imparted
to caldera floors may assist in elucidating the regional deformation active during
caldera formation. The symmetry
of plan-view strain fields is chiefly controlled
by the mode of floor subsidence,
particularly whether subsidence is uniform,
symmetric or asymmetric, portraying
collapse mechanisms known respectively
as plate, downsag and trapdoor.
Plate and downsag subsidence
generates centro-symmetric strain fields
characterized by radial and concentric
discontinuities and subvolcanic dikes.
Such strain fields appear to develop
preferably where magma pressure controls
collapse. By contrast, rectilinear
horizontal strain fields form under unidirectional
stretching and generate normal
faults and subvolcanic dikes transverse
to the stretching direction. Rectilinear
strain fields are typical for trapdoor
subsidence but also for straight
orogenic belts and suggests that the formation
of both may be related. This
was tested for six central Andean collapse
calderas that formed between 10.5
and 2Ma and are located on prominent
NWâSE striking fault zones.
A combined geochronological and structural
analysis of the Miocene Negra
Muerta Caldera in particular was designed
to better understand caldera formation
associated with the prominent
Olacapato â El Toro Fault Zone...conferenc
Deformation of the Onaping Formation in the NE-lobe of the Sudbury Igneous Complex, Canada: Evidence for fold adjustment flow in the core of a km-scale fold
The synformal geometry of the 1.85Ga
Sudbury Igneous Complex (SIC), an impact
melt sheet resulting from largemagnitude
meteorite impact, attests to
post-impact deformation. However, in
contrast to the overlying Onaping Formation,
a heterolithic impact melt breccia,
the SIC shows little evidence for
pervasive ductile strain. This pertains
in particular to its NE-lobe characterized
by a curvature of about 100° in
plain view. This curvature has been interpreted
either as a fold or as a primary
feature. In order to test these scenarios,
a detailed structural analysis was conducted
in the core of the NE-lobe, which
consists of rocks of the Onaping Formation...conferenc
The importance of lithological heterogeneity of the Onaping Formation for understanding post-impact deformation of the Sudbury Impact Structure, Canada
The suevitic Onaping Formation overlies
the layered Main Mass of the
1.85Ga Sudbury Igneous Complex
(SIC) of the Sudbury Impact Structure,
Ontario. The Formation consists of
four Members, namely from top to
bottom, the Black, the Green, the
Gray and the Basal. Post-impact NWSE
shortening during the Penokean
Orogeny (ca. 1.9â1.75 Ga) affected the
Onaping Formation and led to the
lobate shape of the SIC in plan view.
In order to investigate the possible fold
origin of the NE-lobe of the SIC, a
field-based structural analysis of the
Onaping Formation was conducted in
the Frenchman Lake area. The analysis
is based on structural measurements
at 580 stations and encompasses the
orientation of mineral shape fabrics as
well as their intensity. In addition to
these quantities, lithological variation
and metamorphic overprint of the Onaping
Formation was examined. Special
attention was paid thereby to the Green
Member since previous workers stated
that it forms a continuous unit at the
base of the Black Member...conferenc
Deformation der karbonatischen Espanola-Formation im zentralen Teil der Sudbury-Impaktstruktur, Kanada
Archaische Granitoide und palÀoproterozoische
Metasedimente der Huronian
Supergroup werden von dem
schĂŒsselförmigen und partiell erodierten
1.85 Ga alten Impaktschmelzkomplex
der Sudbury-Impaktstruktur ĂŒberlagert.
Huronische Metasedimente und
deren basaler Kontakt zum granitoiden Grundgebirge stehen in einer Entfernung
bis zu 15km von dem lagigen
Komplex und um diesen herum steil.
Obwohl diese Steilstellung durch die Bildung
eines impakt-induzierten Zentralberges
erklÀrt werden kann, ist unklar,
ob orogene Verformung vor dem Impakt
an der Steilstellung beteiligt war. Um
hierĂŒber Aufschluss zu gewinnen, wurden
die basalen Huronischen Einheiten,
insbesondere die karbonatische Espanola
Formation und deren benachbarte
Metakonglomerate und Metasandsteine,
nordöstlich des Impaktschmelzkomplexes
strukturell untersucht. Aufgrund er
NÀhe der metasedimentÀren Einheiten
zu dem 2,5km mÀchtigen
Schmelzkomplex wurde daher auch dessen
möglicher thermischer Einfluss auf
die Metasedimente untersucht...conferenc
Identification of uppercrustal discontinuities using dip curvature analysis of isostatic residual gravity: examples from the central Andes
Structural analysts are often faced with
the problem of identifying prominent
structural discontinuities covered by
post-tectonic sedimentary or volcanic
rocks. Gravity fields are often used to
delineate the trace of buried discontinuities
but are frequently found to be
too crude to localize discontinuities adequately.
Here, we introduce the importance
of dip curvature of the isostatic
residual gravity for identifying
upper-crustal discontinuities. The relationship
between Bouguer gravity, isostatic
residual gravity and its dip curvature,
first-order structural elements and
distribution of Neogene volcanic rocks
was examined in the central Andean
plateau, more specifically, the southern
Altiplano and the Puna...conferenc
Data on the geology and structure of the Copper Cliff embayment and offset dyke, Sudbury Igneous Complex, Canada
This contribution describes maps of the Copper Cliff Embayment (CCE) and Offset (CCO) dyke. The associated study attempts to unravel the mode of melt emplacement and the role of pre-impact faults in the deformation of the southern part of the Sudbury Igneous Complex (SIC). This contribution summarizes field observations (maps and images) and structural measurements. In addition, perspective views of the 3D Move model of the CCE and CCO dyke are provided. This data can be used by researchers and exploration geologists working in the Sudbury mining camp as a basis for future mapping, research and exploration efforts in the Copper Cliff area
Deformation mechanisms in the eastern Sudbury Igneous Complex, Canada: Evidence for meteorite impact into an active orogen
The 1.85 Ga Sudbury Igneous Complex (SIC) in central Ontario is now widely considered to be the erosional remnant of a deformed paleo-horizontal impact melt sheet, about 2.5 km in thickness. Deformed impact melt breccias of the Onaping Formation and postimpact metasedimentary rocks overlie
the layered SIC, which in turn rests on shocked Archean basement and Paleoproterozoic cover rocks. The main
mass of the Igneous Complex is subdivided from top to bottom into granophyre, quartz-gabbro and norite layers. Previous workers considered noncylindrical folding and NW-directed reverse faulting as the main structural processes that formed the asymmetric, syn-formal geometry of the SIC apparent in map view and seismic section. Structural studies support this
model in the southern part of the impact structure, where greenschist-facies metamorphic tectonites of the South
Range Shear Zone (SRSZ) accomplished structural uplift of the southern SIC by NW-directed reverse shearing. However,
little evidence for pervasive ductile strain has been reported from the weakly metamorphosed eastern part of the SIC, the East Range, which is characterised by steep basal dips and maximal curvature in plan view. The objective of this study is to assess the
structural inventory of the East Range in terms of post-emplacement deformation
mechanisms. Our interpretation is
based on published and newly acquired
structural data.
Planar mineral shape fabrics of cumulate
plagioclase and pyroxene are developed
in the intermediate quartz-gabbro
and lower norite layers of the southern
East Range SIC. Microstructures
show little intracrystalline deformation
in quartz. Euhedral cumulate plagioclase
retains an angular outline indicating
magmatic mineral fabric development.
This magmatic foliation is concordant
to SIC contacts or large-scale
discontinuities in their vicinity (Fig. 1).
Magmatic fabrics are observed rarely in
the northern portion of the East Range.
Here, tectonic foliations and SâC fabrics
are developed sporadically at, and
concordant to, brittle structures striking
NâS. A weak tectonic foliation defined
by chlorite that replaces magmatic
minerals is developed in the upper granophyric
SIC of the NE-lobe that connects
the SICâs North and East Ranges
via a 105° arc. This foliation grades
into a shape-preferred orientation of primary,
i.e., magmatic, mafic minerals observed
in the lower granophyre and underlying
layers of the SIC. Mineral fabrics
observed in the NE-lobe SIC are
concordant to metamorphic foliations
developed in the overlying Onaping Formation
breccias. Both foliations strike
parallel to the NE-Lobeâs acute bisectrix
and, thus, display an axial-planar
geometry typical for fabrics formed in
the core of a buckle fold (Fig. 1). Brittle
structures including centimetre-scale
shear-fractures to kilometre-scale faultzones
are observed in the eastern SIC and its host rocks. Largescale
faults striking NâS cut the NElobeâs
eastern limb causing variable
magnitudes of strike separation of
SIC contacts. Centimetre- to metrescale,
brittle faults and chlorite-filled
brittle-ductile shear-zones occur pervasively
in the eastern SIC, often causing
centimetre-scale offset of markers.
Microstructures from first-order
fault-zones indicate deformation at, and
below, greenschist-facies metamorphic
conditions.
The concordance of magmatic and tectonic
mineral shape fabrics in the NElobe
indicates progressive deformation
of the SIC during cooling from the
magmatic state to lower greenschistfacies
metamorphic conditions. Synmagmatic
deformation of the SIC suggests
that it was emplaced during ongoing
orogenic deformation. Furthermore,
maximum principal stress directions
inferred from inversion of faultslip
data collected in the Onaping Formation
are orthogonal to metamorphic
foliation surfaces at the same localities.
This points to a similar deformation
regime in the Onaping Formation
during ductile and brittle deformation.
The concordance of magmatic,
metamorphic and brittle fabrics is explained
best by a single progressive deformation
event that was active while
the SIC cooled and solidified. The lack
of pervasive ductile deformation fabrics
in the East Range SIC can be explained
by rapid cooling of the impact
melt sheet (within 100â500 ka) with respect
to natural tectonic strain rates.
While the geometry of mineral fabrics
in the study area is compatible with
large-scale, non-cylindrical folding, the
low levels of ductile deformation suggest
that shape-change of the eastern SIC
has been accomplished mainly by discontinuous
deformation. This deformation
mechanism may have accomplished
bulk NW-SE shortening that was accommodated
by reverse shearing within
the SRSZ, resulting in large strike separations
of SIC contacts observed in the
western part of the impact structure.
By contrast, the eastern SIC may have
accomplished such shortening by brittleductile,
non-cylindrical folding at the
eastern terminus of the SRSZ. The complex
post-impact deformation pattern of
the central Sudbury Structure results
from impact into an active orogen.conferenc
Evidence from the Vredefort Granophyre Dikes points to crustal relaxation following basin-size impact cratering
The timescale of the modification stage of basin-sized impact structures is not well understood. Owing to ca. 10
km of erosion since its formation, the Vredefort impact structure, South Africa, is an ideal testing ground for
deciphering post-impact modification. Here, we present geophysical and geochemical evidence from the Vre defort Granophyre Dikes, which were derived from the - now eroded - Vredefort impact melt sheet. The dikes
have been studied mostly in terms of their composition, while the timing and duration of their emplacement
remain controversial. We examined the modern depth extent of five dikes, with three from the inner crystalline
core of the central uplift, and two from the boundary between the core and the supracrustal collar of the central
uplift, using two-dimensional electrical resistivity tomography. We found that the core dikes terminate near the
present erosion surface (i.e., <5 m depth). In contrast, the dikes at the core-collar boundary extend to a depth â„
9 m. These observations suggest that the core dikes are exposed near their lowermost terminus. In addition, we
obtained bulk geochemical composition of the dikes, finding that the andesitic composition phase is present in
the core-collar dikes that is not found in the core dikes. The presence of this phase indicates the episodic
emplacement of impact melt into subvertical crater floor fractures.
We conclude that the dike formation was protracted and occurred over a time span of at least 104 years. The
sequential formation of the Vredefort Granophyre Dikes points to horizontal extension of crust below the impact
melt sheet above a kinematic velocity discontinuity, a crustal instability resulting from the dynamic collapse oNational Research Foundation
Deutsche Forschungsgemeinschaft
Universiteit van die Vrystaa
Development of the southern Eastern Cordillera, NW Argentina, constrained by apatite fission track thermochronology: From early Cretaceous extension to middle Miocene shortening
Extraordinary rocks from the peak ring of the Chicxulub impact crater: P-wave velocity, density, and porosity measurements from IODP/ICDP Expedition 364
Joint International Ocean Discovery Program and International Continental Scientific Drilling Program Expedition 364 drilled into the peak ring of the Chicxulub impact crater. We present P-wave velocity, density, and porosity measurements from Hole M0077A that reveal unusual physical properties of the peak-ring rocks. Across the boundary between post-impact sedimentary rock and suevite (impact melt-bearing breccia) we measure a sharp decrease in velocity and density, and an increase in porosity. Velocity, density, and porosity values for the suevite are 2900â3700 m/s, 2.06â2.37 g/cm3, and 20â35%, respectively. The thin (25 m) impact melt rock unit below the suevite has velocity measurements of 3650â4350 m/s, density measurements of 2.26â2.37 g/cm3, and porosity measurements of 19â22%. We associate the low velocity, low density, and high porosity of suevite and impact melt rock with rapid emplacement, hydrothermal alteration products, and observations of pore space, vugs, and vesicles. The uplifted granitic peak ring materials have values of 4000â4200 m/s, 2.39â2.44 g/cm3, and 8â13% for velocity, density, and porosity, respectively; these values differ significantly from typical unaltered granite which has higher velocity and density, and lower porosity. The majority of Hole M0077A peak-ring velocity, density, and porosity measurements indicate considerable rock damage, and are consistent with numerical model predictions for peak-ring formation where the lithologies present within the peak ring represent some of the most shocked and damaged rocks in an impact basin. We integrate our results with previous seismic datasets to map the suevite near the borehole. We map suevite below the Paleogene sedimentary rock in the annular trough, on the peak ring, and in the central basin, implying that, post impact, suevite covered the entire floor of the impact basin. Suevite thickness is 100â165 m on the top of the peak ring but 200 m in the central basin, suggesting that suevite flowed downslope from the collapsing central uplift during and after peak-ring formation, accumulating preferentially within the central basin