Liquid Level Sensor for High Temperature Molten Salt in Confined Container

Electrical resistance measurements on different rod materials in liquid solutions, molten salts, or molten lead are considered to design a liquid level sensor in a sealed containers when the temperature of the fluid is very high (~1000ºC) and conventional measurements are not possible due to properties of the fluid or condition of the container. An analytical solution to the problem is adopted to reduce the cost of the sensor and overcome the difficulties of calibration of sensors at high temperature for prediction of the level of liquid. An electrical circuit model is suggested for analytical solution to compute the resistivity versus height of the electrode rod submerged in the liquid in a narrow container. Good prediction of circuit model for experimental results is verified by comparison of analytical results of different combination of liquid solutions and rods’ material with experimental graphs

Characterization of endemic Shigella boydii strains isolated in Iran by serotyping, antimicrobial resistance, plasmid profile, ribotyping and pulsed-field gel electrophoresis

Background: Shigellosis is one of the major causes of morbidity in children with diarrhea in Iran. The present study was undertaken to characterize apparently sporadic Shigella boydii strains isolated from pediatric patients in Iran. Findings: Ten S. boydii strains isolated from pediatric cases of gastroenteritis and acute diarrhea in Tehran between December 2002 and November 2003 were submitted to serotyping, antimicrobial susceptibility testing, plasmid profile analysis, ribotyping and pulsed field gel electrophoresis (PFGE). Seven isolates were attributed to serotype 2, whereas the remaining three belonged to serotypes 14, 18, 19, respectively. Six drug resistance phenotypes (R1 to R6) were defined with R4 - streptomycin (STR), ampicillin (AMP), sulfamethoxazole-trimethoprim (SXT) - being the most prevalent. Plasmid analysis resulted in seven different plasmid profiles with one to five DNA bands. All strains, but one, shared the same ribotype, but PFGE differentiated them in four groups. Conclusion: Based upon ribotyping and PFGE results, endemic circulation of S. boydii in Tehran, Iran, could be attributed to a few clones. Resistance pattern and plasmid profile analysis proved to be very effective in discriminating apparently unrelated strains of S. boydi

Preparation and electrochemical application of rutin biosensor for differential pulse voltammetric determination of NADH in the presence of acetaminophen

The electrocatalytic behavior of reduced nicotinamide adenine di-nucleotide (NADH) was studied at the surface of a rutin biosensor, using various electrochemical methods. According to the results, the rutin biosensor had a strongly electrocatalytic effect on the oxidation of NADH with the overpotential being decreased by about 450 mV as compared to the process at a bare glassy carbon electrode, GCE. This value is significantly greater than the value of 220 mV that was reported for rutin embedded in a lipid-cast film. The kinetic parameters of the electron transfer coefficient, a, and the heterogeneous charge transfer rate constant, kh, for the electrocatalytic oxidation of NADH at the rutin biosensor were estimated. Furthermore, the linear dynamic range; sensitivity and limit of detection for NADH were evaluated using the differential pulse voltammetry method. The advantages of this biosensor for the determination of NADH are excellent catalytic activity and reproducibility, good detection limit and high exchange current density. The rutin biosensor could separate the oxidation peak potentials of NADH and acetaminophen present in the same solution while at a bare GCE, the peak potentials were indistinguishable

Application of queuing theory in production-inventory optimization

This paper presents a mathematical model for an inventory control system in which customers' demands and suppliers' service time are considered as stochastic parameters. The proposed problem is solved through queuing theory for a single item. In this case, transitional probabilities are calculated in steady state. Afterward, the model is extended to the case of multi-item inventory systems. Then, to deal with the complexity of this problem, a new heuristic algorithm is developed. Finally, the presented bi-level inventory-queuing model is implemented as a case study in Electroestil Company

Human GM3 Synthase Attenuates Taxol-Triggered Apoptosis Associated with Downregulation of Caspase-3 in Ovarian Cancer Cells

BACKGROUND: Taxol (paclitaxel) inhibits proliferation and induces apoptosis in a variety of cancer cells, but it also upregulates cytoprotective proteins and/or pathways that compromise its therapeutic efficacy. MATERIALS AND METHOD: The roles of GM3 synthase (α2,3-sialyltransferase, ST3Gal V) in attenuating Taxol-induced apoptosis and triggering drug resistance were determined by cloning and overexpressing this enzyme in the SKOV3 human ovarian cancer cell line, treating SKOV3 and the transfectants (SKOV3/GS) with Taxol and determining apoptosis, cell survival, clonogenic ability, and caspase-3 activation. RESULTS: In this report, we demonstrated that Taxol treatment resulted in apoptosis which was associated with caspase-3 activation. Taxol treatment upregulated the expression of human GM3 synthase, an enzyme that transfers a sialic acid to lactosylceramide. Moreover, we cloned the full-length GM3 synthase gene and showed for the first time that forced expression of GM3 synthase attenuated Taxol-induced apoptosis and increased resistance to Taxol in SKOV3 cells. CONCLUSIONS: GM3 synthase overexpression inhibited Taxol-triggered caspase-3 activation, revealing that upregulation of GM3 synthase prevents apoptosis and hence reduces the efficacy of Taxol therapy

Brownian Dynamics Simulation of Nucleocytoplasmic Transport: A Coarse-Grained Model for the Functional State of the Nuclear Pore Complex

The nuclear pore complex (NPC) regulates molecular traffic across the nuclear envelope (NE). Selective transport happens on the order of milliseconds and the length scale of tens of nanometers; however, the transport mechanism remains elusive. Central to the transport process is the hydrophobic interactions between karyopherins (kaps) and Phe-Gly (FG) repeat domains. Taking into account the polymeric nature of FG-repeats grafted on the elastic structure of the NPC, and the kap-FG hydrophobic affinity, we have established a coarse-grained model of the NPC structure that mimics nucleocytoplasmic transport. To establish a foundation for future works, the methodology and biophysical rationale behind the model is explained in details. The model predicts that the first-passage time of a 15 nm cargo-complex is about 2.6±0.13 ms with an inverse Gaussian distribution for statistically adequate number of independent Brownian dynamics simulations. Moreover, the cargo-complex is primarily attached to the channel wall where it interacts with the FG-layer as it passes through the central channel. The kap-FG hydrophobic interaction is highly dynamic and fast, which ensures an efficient translocation through the NPC. Further, almost all eight hydrophobic binding spots on kap-β are occupied simultaneously during transport. Finally, as opposed to intact NPCs, cytoplasmic filaments-deficient NPCs show a high degree of permeability to inert cargos, implying the defining role of cytoplasmic filaments in the selectivity barrier