Blade design and operating experience on the MOD-OA 200 kW wind turbine at Clayton, New Mexico

Two 60 foot long aluminum wind turbine blades were operated for over 3000 hours on the MOD-OA wind turbine. The first signs of blade structural damage were observed after 400 hours of operation. Details of the blade design, loads, cost, structural damage, and repair are discussed

Tower and rotor blade vibration test results for a 100-kilowatt wind turbine

The predominant natural frequencies and mode shapes for the tower and the rotor blades of the ERDA-NASA 100-kW wind turbine were determined. The tests on the tower and the blades were conducted both before and after the rotor blades and the rotating machinery were installed on top of the tower. The tower and each blade were instrumented with an accelerometer and impacted by an instrumented mass. The tower and blade structure was analyzed by means of NASTRAN, and computed values agree with the test data

Experimental data and theoretical analysis of an operating 100 kW wind turbine

Experimental test data are correlated with analyses of turbine loads and complete system behavior of the ERDA-NASA 100 kW Mod-0 wind turbine generator over a broad range of steady state conditions, as well as during transient conditions. The deficit in the ambient wind field due to the upwind tower turbine support structure is found to be very significant in exciting higher harmonic loads associated with the flapping response of the blade in bending

Weed Control for Reduced Tillage Systems

PDF pages:

Government review of the Mod-2 wind turbine (as-built)

The findings and recommendations of the Government committee formed to conduct an as-built review of the three Mod-2 wind turbine units at Goldendale, Washington are given. The purpose of the review was to identify any critical deficiencies in machine components that could result in failure, and to recommend any necessary corrective action before resuming safe machine operation. The review concluded that one of the deficiencies identified would preclude planned attended or unattended operation, provided that certain corrective actions were implemented

An operating 200-kW horizontal axis wind turbine

The Mod-OA wind turbine blades were rotated for the first time on November 30, 1977, establishing the Mod-OA as the first wind-driven generator in 35 years to be continually tied into an electrical power system which services a community. Tower-mounted equipment and blade structural design and fabrication are discussed

Aluminum blade development for the Mod-OA 200-kilowatt wind turbine

The rotor blade configuration, fabrication methods, analyses, operating experience, design modifications, and cost are described. Each 60-ft.-(18.3-m-) long aluminum blade used current aircraft fixed wing and rotary wing design and fabrication technologies. Structural damage, repairs, and modifications that occurred during 6500 hours of operation are summarized

Aluminum-blade development for the Mod-0A 200-kilowatt wind turbine

This report documents the operating experience with two aluminum blades used on the DOE/NASA Mod-0A 200-kilowatt wind turbine located at Clayton, New Mexico. Each Mod-0A aluminum blade is 59.9 feet long and weighs 2360 pounds. The aluminum Mod-0A blade design requirements, the selected design, fabrication procedures, and the blade analyses are discussed. A detailed chronology is presented on the operating experience of the Mod-0A aluminum blades used at Clayton, New Mexico. Blade structural damage was experienced. Inspection and damage assessment were required. Structural modifications that were incorporated to the blades successfully extended the useful operating life of the blades. The aluminum blades completed the planned 2 years of operation of the Clayton wind turbine. The blades were removed from service in August 1980 to allow testing of advanced technology wood composite blades

Development and Evaluation of an Enzyme-Linked Immunosorbent Assay for Use in the Detection of Bovine Tuberculosis in Cattle

As a consequence of continued spillover of Mycobacterium bovis into cattle from wildlife reservoirs and increased globalization of cattle trade with associated transmission risks, new approaches such as vaccination and novel testing algorithms are seriously being considered by regulatory agencies for the control of bovine tuberculosis. Serologic tests offer opportunities for identification of M. bovis-infected animals not afforded by current diagnostic techniques. The present study describes assay development and field assessment of a new commercial enzyme-linked immunosorbent assay (ELISA) that detects antibody to M. bovis antigens MPB83 and MPB70 in infected cattle. Pertinent findings include the following: specific antibody responses were detected at 90 to 100 days after experimental M. bovis challenge, minimal cross-reactive responses were elicited by infection/sensitization with nontuberculous Mycobacterium spp., and the apparent sensitivity and specificity of the ELISA with naturally infected cattle were 63% and 98%, respectively, with sensitivity improv- ing as disease severity increased. The ELISA also detected infected animals missed by the routine tuberculin skin test, and antibody was detectable in bulk tank milk samples from M. bovis-infected dairy herds. A high-throughput ELISA could be adapted as a movement, border, or slaughter surveillance test, as well as a supplemental test to tuberculin skin testing