Three Years (2008-2010) Measurements of Atmospheric Concentrations of Organochlorine Pesticides (OCPs) at Station Nord, North East Greenland

Atmospheric concentrations of organochlorine pesticides (OCPs) have been measured for the first time at Station Nord, North-East Greenland, from 2008 to 2010. The data obtained are reported here. Hexachlorobenzene (HCB), endosulfan I and hexachlorocyclohexanes (HCHs) were the predominant compounds detected in the atmosphere, followed by p,p′-DDE and dieldrin. Chlordane isomers and related compounds (trans- and cis-chlordanes, heptachlor and heptachlor epoxide, trans- and cis-nonachlor) were also detected. Atmospheric concentrations of the investigated compounds were correlated with temperature using the Clausius–Clapeyron equation in order to obtain information about their transport properties. The correlation between atmospheric concentrations and temperature was not significant for endosulfan I, γ-HCH and p,p′-DDT, which indicates that direct transport from direct sources is the dominating transport mechanism for these compounds. A significant correlation with temperature was found for all the other studied pesticides and pesticide degradation products, which indicates that re-emission of these compounds from previously contaminated surfaces is an important factor for the observed variation in concentrations. Pesticide concentrations were also correlated with sea ice cover. Concentrations of the compounds that have not been in use for decades correlated with temperature and ice cover, while concentrations of compounds still in use did not correlate with either of these parameters. These observations indicate that processes such as revolatilization from the open sea surface are important mediating factors in the dynamics of anthropogenic persistent pollutants in the Arctic environment under the expected influence of climate change processes

X-Ray Tomographic Techniques for Inspection of Electronic Components

X-ray tomographic techniques including computed tomography (CT) and laminography (body scan tomography) have been examined for their potential for meeting the manufacturing inspection requirements of electronic components and printed wiring assemblies [1,2]. Comparisons with radioscopic inspections have been made

Measurement of the Center-of-Gravity Using X-Ray Computed Tomography

The quantitative capability of CT to measure the relative X-ray linear attenuation coefficient and position of small volume elements in a component also offers the potential to perform center-of-gravity (CG) measurements for rotating systems. Currently, the practice of engine vibration reduction is one of disassembly, iteratively checking balance and grinding off mass until the amount of imbalance is acceptable. This process is labor intensive. An alternative nondestructive method to measure the CG prior to disassembly could provide a cost effective method to minimize the labor effort in balancing operations

The Complement System at the Embryo Implantation Site: Friend or Foe?

An inflammatory-like process and vascular remodeling represent the main changes that occur in decidua in the early phase of pregnancy. These changes are partly induced by trophoblast cells that colonize the decidua and are also contributed by the complement system, which can easily be activated as a result of tissue remodeling. Local control by several complement regulators including surface-bound and soluble molecules is critical to prevent complement-mediated tissue damage in normal pregnancy. C7 expressed on the endothelial cells (ECs) surface has been recognized as a novel complement regulator involved in the control of the proinflammatory effect of the terminal complement complex. The protective role of placental complement regulators in pregnancy is underscored by the recent finding of an association of preeclampsia with mutations in the genes encoding for some of these proteins. Complement components produced at feto-maternal interface serve an important function in placental development. C1q synthesized by decidual ECs and expressed on the cell surface is particularly important in this regard because it acts as a molecular bridge between endovascular trophoblast and ECs. C1q is also produced by extravillous trophoblast and is used to favor trophoblast migration through the decidua. Defective expression of C1q by trophoblast is associated with impaired trophoblast invasion of decidua and may have important implications in pregnancy disorders such as preeclampsia characterized by reduced vascular remodeling

Acceptability with general orderings

We present a new approach to termination analysis of logic programs. The essence of the approach is that we make use of general orderings (instead of level mappings), like it is done in transformational approaches to logic program termination analysis, but we apply these orderings directly to the logic program and not to the term-rewrite system obtained through some transformation. We define some variants of acceptability, based on general orderings, and show how they are equivalent to LD-termination. We develop a demand driven, constraint-based approach to verify these acceptability-variants. The advantage of the approach over standard acceptability is that in some cases, where complex level mappings are needed, fairly simple orderings may be easily generated. The advantage over transformational approaches is that it avoids the transformation step all together. {\bf Keywords:} termination analysis, acceptability, orderings.Comment: To appear in "Computational Logic: From Logic Programming into the Future

Unwinding in Information Flow Security

We study information flow security properties which are persistent, in the sense that if a system is secure then all of its reachable states are secure too. We present a uniform characterization of these properties in terms of a general unwinding schema. This unwinding characterization allows us to prove several compositionality properties of the considered security classes. Moreover, we exploit the unwinding condition to dictate the form of the rules we can use to incrementally develop secure processes and to rectify insecure processes

Correlation of X-Ray CT Measurements to Shear Strength in Pultruded Composite Materials

Pultrusion is an emerging, economical manufacturing process for composite structures. In a pultrusion system, the composite tapes and fabrics are loaded onto a creel, and the materials are fed into a preform (or shaper), along with any fillers that may be needed. If the fiber is not yet preimpregnated with resin, it is run through a resin bath or resin is injected into the die the material is about to enter. The composite is pulled through the heated die and then cut from the system to produce either a fully or partially cured product. This handleable part is then placed in an autoclave for final cure. A number of variables go into the pultrusion process, including the type of fibers, the resin matrix material, pull rate and cure temperature. Destructive testing, such as shear testing of small sections, is the normal method for assessing the quality of the pultrusion manufacturing product. During manufacture, this cannot be performed on the actual product to be used but only on near neighbor test coupons. This can be time consuming, costly, and part of the product is destroyed

Transaxillary Tri-Branch Aortic Endovascular Graft Repair of Recurrent Thoracoabdominal Aneurysm With Pararenal Aortic Occlusion

The absence of an adequate ileo-femoral access is usually considered an absolute contraindication to fenestrated and branched aortic repairs. Alternative routes and dedicated stent-graft designs have been advocated. Hereby, we describe the case of a 73-year-old man with a recurrent type IV thoracoabdominal aortic aneurysm and complete thrombotic pararenal aortic occlusion treated successfully with a tri-branch custom-made endograft deployed via a transaxillary access

The “www” of Xenopus laevis Oocytes: The Why, When, What of Xenopus laevis Oocytes in Membrane Transporters Research

After 50 years, the heterologous expression of proteins in Xenopus laevis oocytes is still essential in many research fields. New approaches and revised protocols, but also classical methods, such as the two-electrode voltage clamp, are applied in studying membrane transporters. New and old methods for investigating the activity and the expression of Solute Carriers (SLC) are reviewed, and the kinds of experiment that are still useful to perform with this kind of cell are reported. Xenopus laevis oocytes at the full-grown stage have a highly efficient biosynthetic apparatus that correctly targets functional proteins at the defined compartment. This small protein factory can produce, fold, and localize almost any kind of wild-type or recombinant protein; some tricks are required to obtain high expression and to verify the functionality. The methodologies examined here are mainly related to research in the field of membrane transporters. This work is certainly not exhaustive; it has been carried out to be helpful to researchers who want to quickly find suggestions and detailed indications when investigating the functionality and expression of the different members of the solute carrier families

Characterization of the transport of lysine-containing dipeptides by PepT1orthologs expressed in Xenopus laevis oocytes.

During digestion, dietary proteins cleaved in di and tri-peptides are translocated from the intestinal lumen into the enterocytes via PepT1 (SLC15A1) using an inwardly directed proton electrochemical gradient. The kinetic properties in various PepT1 orthologs (Dicentrarchus labrax, Oryctolagus cuniculus, Danio rerio) have been explored to determine the transport efficiency of different combinations of lysine, methionine, and glycine. Species-specific differences were observed. Lys-Met resulted the best substrate at all tested potentials in sea bass and rabbit PepT1, whereas in the zebrafish transporter all tested dipeptides (except Gly-Lys) elicited similar currents independently on the charge position or amino acid composition. For the sea bass and rabbit PepT1, kinetic parameters, K0.5 and Imax and their ratio, show the importance of the position of the charged lysine in the peptide. The PepT1 transporter of these species has very low affinity for Lys-Lys and Gly-Lys; this reduces the transport efficiency which is instead higher for Lys-Met and Lys-Gly. PepT1 from zebrafish showed relatively high affinity and excellent transport efficiency for Met-Lys and Lys-Met. These data led us to speculate about the structural determinants involved in substrate interaction according to the model proposed for this transporter