488 research outputs found
Recommended from our members
Poisoning of bubble propelled catalytic micromotors: The chemical environment matters
Self-propelled catalytic microjets have attracted considerable attention in recent years and these devices have exhibited the ability to move in complex media. The mechanism of propulsion is via the Pt catalysed decomposition of H2O2 and it is understood that the Pt surface is highly susceptible to poisoning by sulphur-containing molecules. Here, we show that important extracellular thiols as well as basic organic molecules can significantly hamper the motion of catalytic microjet engines. This is due to two different mechanisms: (i) molecules such as dimethyl sulfoxide can quench the hydroxyl radicals produced at Pt surfaces and reduce the amount of oxygen gas generated and (ii) molecules containing -SH, -SSR, and -SCH3 moieties can poison the catalytically active platinum surface, inhibiting the motion of the jet engines. It is essential that the presence of such molecules in the environment be taken into consideration for future design and operation of catalytic microjet engines. We show this effect on catalytic micromotors prepared by both rolled-up and electrodeposition approaches, demonstrating that such poisoning is universal for Pt catalyzed micromotors. We believe that our findings will contribute significantly to this field to develop alternative systems or catalysts for self-propulsion when practical applications in the real environment are considered
Recommended from our members
Artificial micro-cinderella based on self-propelled micromagnets for the active separation of paramagnetic particles
In this work, we will show that ferromagnetic microjets can pick-up paramagnetic beads while not showing any interaction with diamagnetic silica microparticles for the active separation of microparticles in solution
Oxygen evolution catalysts under proton exchange membrane conditions in a conventional three electrode cell vs. electrolyser device: a comparison study and a 3D-printed electrolyser for academic labs dagger
Developing active and stable oxygen evolution reaction (OER) catalysts that can operate in electrolyser environments is of utmost important in order to produce H2 gas for electricity generation. Currently in academia, many of these studies are carried out in conventional three-electrode cell set-ups; however, this configuration may not accurately represent conditions experienced under practical electrolyser conditions. Herein, a range of transition metal oxide (TMO) catalysts are evaluated and compared in a three-electrode cell and in an electrolyser. We show that the same catalyst significantly underperforms in a three-electrode cell. Hence, many OER catalysts in academic labs may have been erroneously omitted from further optimisation processes due to showing âpoorâ performance in conventional three-electrode cells. Herein, we wish to show this discrepancy experimentally and suggest a solution to scientists wanting to find active OER catalysts by using 3D-printing to inexpensively manufacture electrolyser devices for OER catalyst evaluation
Group-IV graphene- and graphane-like nanosheets
We performed a first principles investigation on the structural and
electronic properties of group-IV (C, SiC, Si, Ge, and Sn) graphene-like sheets
in flat and buckled configurations and the respective hydrogenated or
fluorinated graphane-like ones. The analysis on the energetics, associated with
the formation of those structures, showed that fluorinated graphane-like sheets
are very stable, and should be easily synthesized in laboratory. We also
studied the changes on the properties of the graphene-like sheets, as result of
hydrogenation or fluorination. The interatomic distances in those graphane-like
sheets are consistent with the respective crystalline ones, a property that may
facilitate integration of those sheets within three-dimensional nanodevices
Evidence of silicene in honeycomb structures of silicon on Ag(111)
In the search for evidence of silicene, a two-dimensional honeycomb lattice
of silicon, it is important to obtain a complete picture for the evolution of
Si structures on Ag(111), which is believed to be the most suitable substrate
for growth of silicene so far. In this work we report the finding and evolution
of several monolayer superstructures of silicon on Ag(111) depending on the
coverage and temperature. Combined with first-principles calculations, the
detailed structures of these phases have been illuminated. These structure were
found to share common building blocks of silicon rings, and they evolve from a
fragment of silicene to a complete monolayer silicene and multilayer silicene.
Our results elucidate how silicene formes on Ag(111) surface and provide
methods to synthesize high-quality and large-scale silicene.Comment: 6 pages, 4 figure
A new view of electrochemistry at highly oriented pyrolytic graphite
Major new insights on electrochemical processes at graphite electrodes are reported, following extensive investigations of two of the most studied redox couples, Fe(CN)64â/3â and Ru(NH3)63+/2+. Experiments have been carried out on five different grades of highly oriented pyrolytic graphite (HOPG) that vary in step-edge height and surface coverage. Significantly, the same electrochemical characteristic is observed on all surfaces, independent of surface quality: initial cyclic voltammetry (CV) is close to reversible on freshly cleaved surfaces (>400 measurements for Fe(CN)64â/3â and >100 for Ru(NH3)63+/2+), in marked contrast to previous studies that have found very slow electron transfer (ET) kinetics, with an interpretation that ET only occurs at step edges. Significantly, high spatial resolution electrochemical imaging with scanning electrochemical cell microscopy, on the highest quality mechanically cleaved HOPG, demonstrates definitively that the pristine basal surface supports fast ET, and that ET is not confined to step edges. However, the history of the HOPG surface strongly influences the electrochemical behavior. Thus, Fe(CN)64â/3â shows markedly diminished ET kinetics with either extended exposure of the HOPG surface to the ambient environment or repeated CV measurements. In situ atomic force microscopy (AFM) reveals that the deterioration in apparent ET kinetics is coupled with the deposition of material on the HOPG electrode, while conducting-AFM highlights that, after cleaving, the local surface conductivity of HOPG deteriorates significantly with time. These observations and new insights are not only important for graphite, but have significant implications for electrochemistry at related carbon materials such as graphene and carbon nanotubes
Biocompatibility of poly(lactic acid) with incorporated graphene-based materials
The incorporation of graphene-based materials has been shown to improve mechanical properties of poly(lactic acid) (PLA). In this work, PLA films and composite PLA films incorporating two graphene-based materials â graphene oxide (GO) and graphene nanoplatelets (GNP) â were prepared and characterized regarding not only biocompatibility, but also surface topography, chemistry and wettability. The presence of both fillers changed the films surface topography, increasing the roughness, and modified the wettability â the polar component of surface free energy increased 59% with GO and decreased 56% with GNP. Mouse embryo fibroblasts incubated with both fillers exceeded the IC50 in both cases with a concentration of 10 ÎŒg mLâ1. No variations in cell proliferation at the surface of the composite films were observed, except for those containing GO after 24 h incubation, which presented higher cell proliferation than pristine PLA films. Platelet adhesion to PLA and PLA/GNP films was lower in the presence of plasma proteins than when no proteins were present. Furthermore, incorporation of GNP into PLA reduced platelet activation in the presence of plasma proteins.
The results indicated that low concentrations of GO and GNP may be incorporated safely in PLA to improve aspects relevant for biomedical applications, such as mechanical properties.Funding for this work was partially provided by FEDER, through Programa Operacional Factores de Competitividade - COMPETE, and by National Funding through FCT - Fundacao para a Ciencia e a Tecnologia, in the framework of project PTDC/EME-PME/114808/2009 and of grant SFRH/BPD/63722/2009
Pharmaceutical electrochemistry: the electrochemical detection of aspirin utilising screen printed graphene electrodes as sensors platforms.
A sensitive electrochemical sensor was designed for acetyl salicylic acid detection using graphene modified Screen Printed Electrodes. The electrochemical response of the sensor with graphene was improved compared to Screen Printed Electrodes without graphene and displayed an excellent analytical performance for the detection of acetyl salicylic acid. The high acetyl salicylic acid loading capacity on the electrode surface and the outstanding electric conductivity of graphene were also discussed in this manuscript. When a range of different concentrations of acetyl salicylic acid from 0.1 to 100 ÎŒM into a pH 4 buffer solution (N defined as the sample size N = 9) were plotted against the oxidation peak a linear response was observed. The detection limit was found to be 0.09 ÎŒM based on (3-Ï/slope). Screen Printed Graphene electrodes sensors methodology is shown to be useful for quantifying low levels of acetyl salicylic acid in a buffer solution as well as in biological matrixes such as human oral fluid. A linear response was obtained over a range of concentrations from 10 to 150 ÎŒM into a human oral fluid solution (N = 10) giving a detection limit of 8.7 ÎŒM
Label-free Detection of Influenza Viruses using a Reduced Graphene Oxide-based Electrochemical Immunosensor Integrated with a Microfluidic Platform
Reduced graphene oxide (RGO) has recently gained considerable attention for use in electrochemical biosensing applications due to its outstanding conducting properties and large surface area. This report presents a novel microfluidic chip integrated with an RGO-based electrochemical immunosensor for label-free detection of an influenza virus, H1N1. Three microelectrodes were fabricated on a glass substrate using the photolithographic technique, and the working electrode was functionalized using RGO and monoclonal antibodies specific to the virus. These chips were integrated with polydimethylsiloxane microchannels. Structural and morphological characterizations were performed using X-ray photoelectron spectroscopy and scanning electron microscopy. Electrochemical studies revealed good selectivity and an enhanced detection limit of 0.5 PFU mL(-1), where the chronoamperometric current increased linearly with H1N1 virus concentration within the range of 1 to 104 PFU mL(-1) (R-2 = 0.99). This microfluidic immunosensor can provide a promising platform for effective detection of biomolecules using minute samples.ope
- âŠ