1,875 research outputs found
Solid-State Excitation Laser for Laser-Ultrasonics
The inspection speed of laser-ultrasonics compared with conventional ultrasonic testing is limited by the pulse repetition rate of the excitation laser. The maximum pulse repetition rate reported up to now for CO2-lasers, which are presently used for nearly all systems, is in the range of 400 Hz. In this paper a new approach based on a diode-pumped solid-state laser is discussed, which is currently being developed. This new excitation laser is designed for a repetition rate of 1 kHz and will operate at a mid-IR wavelength of 3.3 m. The higher repeti-tion rate enables a higher inspection speed, whereas the mid-IR wavelength anticipates a better coupling efficiency. The total power for pumping the laser crystals is transported via flexible optical fibres to the compact laser head, thus allowing operation on a robot arm. The laser head consists of a master oscillator feeding several lines of power amplifiers and in-cludes nonlinear optical wavelength conversion by an optical parametric process. It is char-acterized by a modular construction which provides optimal conditions for operation at high average power as well as for easy maintenance. These features will enable building reliable, long-lived, rugged, smart laser ultrasonic systems in futur
The Role of Nonlinear Dynamics in Quantitative Atomic Force Microscopy
Various methods of force measurement with the Atomic Force Microscope (AFM)
are compared for their ability to accurately determine the tip-surface force
from analysis of the nonlinear cantilever motion. It is explained how
intermodulation, or the frequency mixing of multiple drive tones by the
nonlinear tip-surface force, can be used to concentrate the nonlinear motion in
a narrow band of frequency near the cantilevers fundamental resonance, where
accuracy and sensitivity of force measurement are greatest. Two different
methods for reconstructing tip-surface forces from intermodulation spectra are
explained. The reconstruction of both conservative and dissipative tip-surface
interactions from intermodulation spectra are demonstrated on simulated data.Comment: 25 pages (preprint, double space) 7 figure
Flight test report of the NASA icing research airplane: Performance, stability, and control after flight through natural icing conditions
Flight test results are presented documenting the effect of airframe icing on performance and stability and control of a NASA DHC-6 icing research aircraft. Kohlman System Research, Inc., provided the data acquisition system and data analysis under contract to NASA. Performance modeling methods and MMLE techniques were used to determine the effects of natural ice on the aircraft. Results showed that ice had a significant effect on the drag coefficient of the aircraft and a modest effect on the MMLE derived longitudinal stability coefficients (code version MMLE). Data is also presented on asymmetric power sign slip maneuvers showing rudder floating characteristics with and without ice on the vertical stabilizer
The measurement of aircraft performance and stability and control after flight through natural icing conditions
The effects of airframe icing on the performance and stability and control of a twin-engine commuter-class aircraft were measured by the NASA Lewis Research Center. This work consisted of clear air tests with artificial ice shapes attached to the horizontal tail, and natural icing flight tests in measured icing clouds. The clear air tests employed static longitudinal flight test methods to determine degradation in stability margins for four simulated ice shapes. The natural icing flight tests employed a data acquisition system, which was provided under contract to NASA by Kohlman Systems Research Incorporated. This system used a performance modeling method and modified maximum likelihood estimation (MMLE) technique to determine aircraft performance degradation and stability and control. Flight test results with artificial ice shapes showed that longitudinal, stick-fixed, static margins are reduced on the order of 5 percent with flaps up. Natural icing tests with the KSR system corroborated these results and showed degradation in the elevator control derivatives on the order of 8 to 16 percent depending on wing flap configuration. Performance analyses showed the individual contributions of major airframe components to the overall degration in lift and drag
Haze at Occator crater on dwarf planet Ceres
A diurnal varying haze layer at the bright spots of Occator on dwarf planet
Ceres has been reported from images of the Dawn Framing Camera. This finding is
supported by ground-based observations revealing diurnal albedo changes at
Occator's longitude. In the present work, we further investigate the previously
reported haze phenomenon in more detail using additional Framing Camera images.
We demonstrate that the light scattering behavior at the central floor of
Occator is different compared to a typical cerean surface and is likely
inconsistent with a pure solid surface scatterer. The identified deviation is
best explained by an additional component to the scattered light of the
surface, i.e., a haze layer. Our results support the water vapor detection by
Herschel observations though the existence of a tenuous cerean exosphere is not
yet confirmed.Comment: 2016 ApJL 833 L2
Practical approach on frail older patients attended for acute heart failure
Acute heart failure (AHF) is a multi-organ dysfunction syndrome. In addition to known cardiac dysfunction, non-cardiac comorbidity, frailty and disability are independent risk factors of mortality, morbidity, cognitive and functional decline, and risk of institutionalization. Frailty, a treatable and potential reversible syndrome very common in older patients with AHF, increases the risk of disability and other adverse health outcomes. This position paper highlights the need to identify frailty in order to improve prognosis, the risk-benefits of invasive diagnostic and therapeutic procedures, and the definition of older-person-centered and integrated care plans
Genome-wide association studies in a barley (Hordeum vulgare) diversity set reveal a limited number of loci for resistance to spot blotch (Bipolaris sorokiniana)
Abstract Spot blotch caused by Bipolaris sorokiniana is an important disease in barley worldwide, causing considerable yield losses and reduced grain quality. In order to identify QTL conferring resistance to spot blotch, a highly diverse worldwide barley set comprising 449 accessions was phenotyped for seedling resistance with three isolates (No 31, SH 15 and SB 61) and for adult plant resistance at two locations (Russia and Australia) in two years. Genotyping with the 50Â k iSelect barley SNP genotyping chip yielded 33,818 informative markers. Genome-wide association studies (GWAS) using a compressed mixed linear model, including population structure and kinship, revealed 38 significant marker-trait associations (MTA) for spot blotch resistance. The MTA corresponded to two major QTL on chromosomes 1H and 7H and a putative new minor QTL on chromosome 7H explaining between 2.79% and 13.67% of the phenotypic variance. A total of 10 and 14 high-confidence genes were identified in the respective major QTL regions, seven of which have a predicted involvement in pathogen recognition or defence
- …