Petrologic and oxygen-isotopic investigations of eucritic and anomalous mafic achondrites

The most common asteroidal igneous meteorites are eucrite-type basalts and gabbros rocks composed of ferroan pigeonite and augite, calcic plagioclase, silica, ilmenite, troilite, Ca-phosphate, chromite and Fe-metal. These rocks are thought to have formed on a single asteroid along with howardites and diogenites (HEDs). However, Northwest Africa (NWA) 011 is mineralogically identical to eucrites, but has an O-isotopic composition distinct from them and was derived from a different asteroid. Modern analyses with higher precision have shown that some eucrites have smaller O-isotopic differences that are nevertheless well-resolved from the group mean

Magnetotransport in the Normal State of La1.85Sr0.15Cu(1-y)Zn(y)O4 Films

We have studied the magnetotransport properties in the normal state for a series of La1.85Sr0.15Cu(1-y)Zn(y)O4 films with values of y, between 0 and 0.12. A variable degree of compressive or tensile strain results from the lattice mismatch between the substrate and the film, and affects the transport properties differently from the influence of the zinc impurities. In particular, the orbital magnetoresistance (OMR) varies with y but is strain-independent. The relations for the resistivity and the Hall angle and the proportionality between the OMR and tan^2 theta are followed about 70 K. We have been able to separate the strain and impurity effects by rewriting the above relations, where each term is strain-independent and depends on y only. We also find that changes in the lattice constants give rise to closely the same fractional changes in other terms of the equation.The OMR is more strongly supressed by the addition of impurities than tan^2 theta. We conclude that the relaxation ratethat governs Hall effect is not the same as for the magnetoresistance. We also suggest a correspondence between the transport properties and the opening of the pseudogap at a temperature which changes when the La-sr ratio changes, but does not change with the addition of the zinc impurities

Computationally efficient 3D analytical magnet loss prediction in surface mounted permanent magnet machines

This study proposes a computationally efficient analytical method, for accurate prediction of three-dimensional (3D) eddy current loss in the rotor magnets of surface mounted permanent magnet (SPM) machines considering slotting effect. Subdomain model incorporating stator tooth tips is employed to generate the information on radial and tangential time-derivatives of 2D magnetic field (eddy current sources) within the magnet. The distribution of the eddy current sources in 3D is established for the magnets by applying the eddy current boundary conditions and the Coulomb gauge imposed on the current vector potential. The 3D eddy current distributions in magnets are derived analytically by employing the method of variable separation and the total eddy current loss in the magnets are subsequently established. The method is validated by 3D time-stepped finite element analysis for 18-slot, 8-pole and 12-slot, 8-pole permanent magnet machines. The eddy current loss variations in the rotor magnets with axial and circumferential number of segmentations are studied. The reduction of magnet eddy current loss is investigated with respect to harmonic wavelength of the source components to suggest a suitable segmentation for the rotor magnets in SPM machines

Direct Measurements of the Branching Fractions for D0→K−e+νeD^0 \to K^-e^+\nu_e and D0→π−e+νeD^0 \to \pi^-e^+\nu_e and Determinations of the Form Factors f+K(0)f_{+}^{K}(0) and f+π(0)f^{\pi}_{+}(0)

The absolute branching fractions for the decays $D^0 \to K^-e ^+\nu_e$ and $D^0 \to \pi^-e^+\nu_e$ are determined using $7584\pm 198 \pm 341$ singly tagged $\bar D^0$ sample from the data collected around 3.773 GeV with the BES-II detector at the BEPC. In the system recoiling against the singly tagged $\bar D^0$ meson, $104.0\pm 10.9$ events for $D^0 \to K^-e ^+\nu_e$ and $9.0 \pm 3.6$ events for $D^0 \to \pi^-e^+\nu_e$ decays are observed. Those yield the absolute branching fractions to be $BF(D^0 \to K^-e^+\nu_e)=(3.82 \pm 0.40\pm 0.27)$ and $BF(D^0 \to \pi^-e^+\nu_e)=(0.33 \pm 0.13\pm 0.03)$. The vector form factors are determined to be $|f^K_+(0)| = 0.78 \pm 0.04 \pm 0.03$ and $|f^{\pi}_+(0)| = 0.73 \pm 0.14 \pm 0.06$. The ratio of the two form factors is measured to be $|f^{\pi}_+(0)/f^K_+(0)|= 0.93 \pm 0.19 \pm 0.07$.Comment: 6 pages, 5 figure

Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta

Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector, the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and (7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure

BESII Detector Simulation

A Monte Carlo program based on Geant3 has been developed for BESII detector simulation. The organization of the program is outlined, and the digitization procedure for simulating the response of various sub-detectors is described. Comparisons with data show that the performance of the program is generally satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM

Measurement of branching fractions for the inclusive Cabibbo-favored ~K*0(892) and Cabibbo-suppressed K*0(892) decays of neutral and charged D mesons

The branching fractions for the inclusive Cabibbo-favored ~K*0 and Cabibbo-suppressed K*0 decays of D mesons are measured based on a data sample of 33 pb-1 collected at and around the center-of-mass energy of 3.773 GeV with the BES-II detector at the BEPC collider. The branching fractions for the decays D+(0) -> ~K*0(892)X and D0 -> K*0(892)X are determined to be BF(D0 -> \~K*0X) = (8.7 +/- 4.0 +/- 1.2)%, BF(D+ -> ~K*0X) = (23.2 +/- 4.5 +/- 3.0)% and BF(D0 -> K*0X) = (2.8 +/- 1.2 +/- 0.4)%. An upper limit on the branching fraction at 90% C.L. for the decay D+ -> K*0(892)X is set to be BF(D+ -> K*0X) < 6.6%

Measurements of the Mass and Full-Width of the ηc\eta_c Meson

In a sample of 58 million $J/\psi$ events collected with the BES II detector, the process J/$\psi\to\gamma\eta_c$ is observed in five different decay channels: $\gamma K^+K^-\pi^+\pi^-$, $\gamma\pi^+\pi^-\pi^+\pi^-$, $\gamma K^\pm K^0_S \pi^\mp$ (with $K^0_S\to\pi^+\pi^-$), $\gamma \phi\phi$ (with $\phi\to K^+K^-$) and $\gamma p\bar{p}$. From a combined fit of all five channels, we determine the mass and full-width of $\eta_c$ to be $m_{\eta_c}=2977.5\pm1.0 ({stat.})\pm1.2 ({syst.})$ MeV/$c^2$ and $\Gamma_{\eta_c} = 17.0\pm3.7 ({stat.})\pm7.4 ({syst.})$ MeV/$c^2$.Comment: 9 pages, 2 figures and 4 table. Submitted to Phys. Lett.

The σ\sigma pole in J/ψ→ωπ+π−J/\psi \to \omega \pi^+ \pi^-

Using a sample of 58 million $J/\psi$ events recorded in the BESII detector, the decay $J/\psi \to \omega \pi^+ \pi^-$ is studied. There are conspicuous $\omega f_2(1270)$ and $b_1(1235)\pi$ signals. At low $\pi \pi$ mass, a large broad peak due to the $\sigma$ is observed, and its pole position is determined to be $(541 \pm 39)$ - $i$ $(252 \pm 42)$ MeV from the mean of six analyses. The errors are dominated by the systematic errors.Comment: 15 pages, 6 figures, submitted to PL