65 research outputs found
Percolation threshold of carbon nanotubes filled unsaturated polyesters
This paper reports on the development of electrically conductive nanocomposites
containing multi-walled carbon nanotubes in an unsaturated polyester matrix. The
resistivity of the liquid suspension during processing is used to evaluate the
quality of the filler dispersion, which is also studied using optical
microscopy. The electrical properties of the cured composites are analysed by AC
impedance spectroscopy and DC conductivity measurements. The conductivity of the
cured nanocomposite follows a statistical percolation model, with percolation
threshold at 0.026 wt.% loading of nanotubes. The results obtained show that
unsaturated polyesters are a matrix suitable for the preparation of electrically
conductive thermosetting nanocomposites at low nanotube concentrations. The
effect of carbon nanotubes reaggregation on the electrical properties of the
spatial structure generated is discussed
Toward a constitutive model for cure dependent modulus of a high temperature epoxy during the cure
A constitutive model, based on Kohlrausch-Williams-Watts (KWW) equations, was
developed to simulate the evolution of the dynamic relaxation modulus during the
cure of a "high temperature' epoxy. The basic assumption of the modelling
methodology proposed is the equivalence of the mechanisms underlying the
evolution of the glass transition temperature and the relaxation time shift
during the cure, leading to the use of a common potential function. This
assumption is verified by the comparison of normalized glass transition data and
principal relaxation times, which have been found to follow a single master
curve. Results show satisfactory agreement between experimental data and model
prediction over the range of chemical conversion considered
Use of microfasteners to produce damage tolerant composite structures
The paper concerns the mechanical performance of continuous fibre/thermosetting polymer matrix composites reinforced in the through-thickness direction with fibrous or metallic rods or threads in order to mitigate against low delamination resistance. Specific illustrations of the effects of microfasteners in reducing delamination crack growth are made for Z-pinned and tufted composites. Response to loading in such ‘structured materials’ is subject to multiple parameters defining their in-plane and out-of-plane properties. Single microfastener mechanical tests are well suited to establish the crack bridging laws under a range of loading modes, from simple delamination crack opening to shear, and provide the basis for predicting the corresponding response of microfastener arrays, within a given material environment. The fundamental experiments on microfasteners can be used to derive analytical expressions to describe the crack bridging behaviour in a general sense, to cover all possible loadings. These expressions can be built into cohesive element constitutive laws in a finite-element framework for modelling the effects of microfastener arrays on the out-of-plane mechanical response of reinforced structural elements, including the effects of known manufacturing imperfections. Such predictive behaviour can then be used to assess structural integrity under complex loading, as part of the component design process. This article is part of the themed issue ‘Multiscale modelling of the structural integrity of composite materials’
Cure path dependency of mode i fracture toughness in thermoplastic particle interleaf toughened prepreg laminates
AbstractThe effect of cure cycle on fracture behaviour of a commercial thermoplastic particle interleaved prepreg system was investigated. Laminates were manufactured at 700kPa in an autoclave using eight different thermal cycles that included both raising the cure temperature above the standard 180°C cure cycle and incorporating an intermediate dwell stage between 150 and 170°C prior to reaching the 180°C cure temperature. Double cantilever beam tests were conducted on specimens from the cured laminates. The stick–slip crack behaviour, observed in samples manufactured using the standard cure cycle, changed to stable crack growth when processing deviated by 10°C. The mode I fracture toughness values were reduced by 11–22% when incorporating an intermediate dwell stage before the final cure temperature. Scanning electron microscopy inspection of the fracture surfaces showed differences between samples made by standard cure cycles and those made using process deviations
Fatigue delamination behaviour of unidirectional carbon fibre/epoxy laminates reinforced by Z-Fiber® pinnin
-Pin reinforced carbon-fibre epoxy laminates were tested under Mode I and Mode
II conditions, both quasi-statically and in fatigue. Test procedures were
adapted from existing standard or pre-standard tests. Samples containing 2% and
4% areal densities of carbon-fibre Z-pins (0.28mm diameter) were compared with
unpinned laminates. Quasi-static tests under displacement control yielded a
dramatic increase of the apparent delamination resistance. Specimens with 2% pin
density failed in Mode I at loads 170N, equivalent to an apparent GIC of 2kJ/m2.
Fatigue testing under load control showed that the presence of the through-
thickness reinforcement slowed down fatigue delamination propagation
Improved impact performance of marine sandwich panels using through-thickness reinforcement: Experimental results
This paper presents results from a test developed to simulate the water impact
(slamming) loading of sandwich boat structures. A weighted elastomer ball is
dropped from increasing heights onto rigidly supported panels until damage is
detected. Results from this test indicate that honeycomb core sandwich panels,
the most widely used material for racing yacht hulls, start to damage due to
core crushing at impact energies around 550 J. Sandwich panels of the same areal
weight and with the same carbon/epoxy facings but using a novel foam core
reinforced in the thickness direction with pultruded carbon fibre pins, do not
show signs of damage until above 1200 J impact energy. This suggests that these
will offer significantly improved resistance to wave impact. Quasi-static test
results cannot be used to predict impact resistance here as the crush strength
of the pinned foam is more sensitive to loading rate than that of the honeycomb
core
Effect of carbon nanoparticle addition on epoxy cure
The thesis reports studies of cure kinetics and the glass transition temperature advancements of three commercial epoxy resin systems: MY 750 / HY 5922 (Vantico), MTM 44 -1 (ACG) and 8552 (Hexcel Composites). This investigation was conducted with the utilisation of Differential Scanning Calorimetry (DSC) and Temperature Modulated DSC (TMDSC). Appropriate phenomenological cure kinetics models were built to predict the degree of cure as a function of temperature/time profile. The validity of superposition of dynamic and isothermal experimental data was established. Rheological measurements were performed in order to determine the gelation region under given cure conditions. The cure modelling methodology was validated against an international Round-Robin exercise led by the University of British Columbia (Canada). The effects of carbon nanoparticle incorporation on the cure kinetics and the glass transition temperature advancement of two of the epoxy systems were also studied. Cure kinetics models were developed for the nanocomposites containing commercial multiwalled carbon nanotubes and a direct comparison was made with the models of the neat resin systems. The glass transition temperature advancement is shown to be affected in the early stages of the cure. The state of the dispersion of the nanoparticles was studied in order to correlate it with the observed effects upon the cure and on the morphology of the cured samples. The presence of carbon nanotube clusters is shown to have an influence on the phase separation in the MTM 44-1 resin system. As a potential industrial application of this study, optical fibre refractometers were utilised as an on-line cure monitoring technique. A good correlation was established between the measured refractive index changes during the cure and the degree of cure predicted by the above mentioned models, for the neat resin systems and their nanocomposites.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Cure induced property changes and warpage in thermoset resins and composites
The aim of the present work was to investigate the evolution of thermal and mechanical properties during the polymerisation of a thermosetting resin that is typical those used as the matrix in advanced composites. The mechanism of the cure reaction was studied using differential scanning calorimetry (DSC) in both dynamic (thermal scanning) and isothermal modes, and procedures for correlating the two types of calorimetric data were developed. The model finally chosen encapsulates the diffusion- controlled mechanism of reaction by establishing a one-to-one relationship between the degree of cure and the glass transition temperature, which is assumed to be a structural parameter during the polymerisation. A detailed experimental investigation of specific heat capacity, thermal conductivity, secondary transformations (gelation and vitrification), thermal and chemical volume changes and stress relaxation moduli was carried out to establish a suitable database for the resin. Where possible, a closed analytical model was employed; alternatively, an interpolation procedure was developed evaluate the changes in a selected property during a more complex temperature profile. Experimental equipment was developed to perform shrinkage measurements on the neat resin system; the results obtained were later compared with experimental data from standard liquid dilatometry tests. A simulation of the curing of a bi-material cantilever beam is presented as a test case highlight the influence of property changes on the final curvature. Sample curvature during the experiment was recorded using a digital camera and then analysed using graphical software. The correlation between the observed values of curvature and the results of a finite element based simulation was used to validate the kinetics model and property modelling for the chosen thermosetting resin.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Suppressing delaminations in composites across a range of loading modes
This study presents two means of achieving high fracture toughness throughout the entire mixed
Mode I/II test range, using customised placement of composite and metal Z-pins in hybrid arrays, and
novel hybrid metal/composite Z-pins. The study shows that hybrid arrays that contain an equal number
of composite and metal Z-pins exhibit a notable increase in the apparent fracture toughness in Mode II
compared to 100% composite pins, while maintaining adequate Mode I performance. Hybrid
metal/composite Z-pins, which consist of a composite exterior and a metal core have been shown to
offer a single Z-pin solution for high fracture toughness under mixed Mode I/II loads without
compromising either Mode I or Mode II performance of individual composite or metal Z-pins
respectively. The composite exterior of the hybrid Z-pin ensures high resistance to pull-out failure,
whilst the metal core guarantees high energy absorption at high mixed mode load angles via plastic
deformation
- …