3,602 research outputs found
Large-angle scattering of multi-GeV muons on thin Lead targets
The probability of large-angle scattering for multi-GeV muons in thin () lead targets is studied. The new estimates presented here are
based both on simulation programs (GEANT4 libraries) and theoretical
calculations. In order to validate the results provided by simulation, a
comparison is drawn with experimental data from the literature. This study is
particularly relevant when applied to muons originating from
interactions of CNGS beam neutrinos. In that circumstance the process under
study represents the main background for the search in
the channel for the OPERA experiment at LNGS. Finally, we also
investigate, in the CNGS context, possible contributions from the muon
photo-nuclear process which might in principle also produce a large-angle muon
scattering signature in the detector
Waveguide and loop coupling to fast MHD toroidal eigenmodes
Heating of plasmas by wave techniques requires an effective method of coupling rf energy to the plasma. In cavities the presence of weakly damped eigenmodes will enhance the loading of antennas when the wave frequency equals an eigenmode frequency. This report considers two methods of coupling to fast MHD eigenmodes in a toroidal cavity: one is by a waveguide mounted perpendicular to the vacuum vessel wall; and the other by a loop placed within the cavity. (auth
Security-Oriented Formal Techniques
Security of software systems is a critical issue in a world where Information Technology is becoming more and more pervasive. The number of services for everyday life that are provided via electronic networks is rapidly increasing, as witnessed by the longer and longer list of words with the prefix "e", such as e-banking, e-commerce, e-government, where the "e" substantiates their electronic nature. These kinds of services usually require the exchange of sensible data and the sharing of computational resources, thus needing strong security requirements because of the relevance of the exchanged information and the very distributed and untrusted environment, the Internet, in which they operate. It is important, for example, to ensure the authenticity and the secrecy of the exchanged messages, to establish the identity of the involved entities, and to have guarantees that the different system components correctly interact, without violating the required global properties
Photopyroelectric Investigation of the trans–cis Isomerization Effect on the Nematic- Isotropic Phase Transition of a Liquid Crystalline Azobenzene
Photopyroelectric calorimetry has been applied to the study of the effects of different concentration of photo-induced cis isomeric molecules on the characteristics of the nematic – isotropic phase transition in p,p’-diheptylazobenzene (7AB) samples. The investigations could be carried out by monitoring the behavior of the thermal diffusivity over the phase transition before and during the sample irradiation with UV light of varying intensity. Among other, it is shown that the monitoring of the time dependence of the thermal diffusivity at fixed sample temperature enabled the comparative study of the dynamics of the trans–cis and cis–trans isomeric transitions. It was shown that the increasing cis isomers concentration caused an increase in the fraction of material undergoing the phase transitions and increased the cis–trans conversion rate. Finally, polarization microscopy observations of the sample texture, which could be carried out together with the calorimetric evaluations proved useful for a more comprehensive analysis of the obtained results
Thermographic and reflectographic imaging investigations on Baroque paintings preserved at the Chigi Palace in Ariccia
In this work, two different mid-infrared imaging techniques operating in the 3-5 μm spectral range are applied to the study of three paintings on canvas, dating back to the XVII century, preserved at the Chigi Palace in Ariccia (Italy). A combined approach based on the use of pulsed thermography and mid-infrared reflectography is proposed for the analysis of the 'Primavera' by Filippo Lauri and Mario Nuzzi, the 'Ritratto di Mario Nuzzi che dipinge un vaso di fiori' by Giovanni Maria Morandi and Mario Nuzzi and the 'Ebbrezza di Noee' by Andrea Sacchi. The aim is to show how the integrated use of these techniques enables a depth-resolved investigation of the entire layered structure of the paintings, from the surface up to the canvas support. The complementarity of the presented results allows an evaluation of the conservative status of the support and the detection of graphical and pictorial features hidden beneath the surface layer, such as pentimenti, as these features are important for the historical and artistic characterisation of the artefact
Stability prediction of early orthopedic treatment in Class III malocclusion: morphologic discriminant analysis
Background To evaluate morphologic differences between class III malocclusion success and failure treatment subjects in order to identify which variables are more predictive for long-term stability in early orthopedic treatment. In this retrospective study, 31 patients were enrolled from the Department of Orthodontics (Rome Tor Vergata). Inclusion criteria were as follows: white ancestry, class III malocclusion, mixed dentition, cervical stage (CS) 1-2, no pseudo-class III. Pre-treatment radiographic and cast records were collected. Each patient underwent rapid maxillary expansion/facial mask/bite block (RME/FM/BB) orthopedic treatment until correction. At T1 (permanent dentition, CS4), records were recollected. According to treatment stability, relapse group (RG, 19) and success group (SG, 12) were identified. Sagittal and vertical cephalometric and digital cast measurements were performed. Student's t tests were used for statistically significant differences inter and intra groups. For discriminant analysis, relapse or success status was added to each patient's T0 data. Results At T0, RG showed larger upper anterior transversal width (p = 0.0266), while at T1 the upper anterior length was shorter than SG (p = 0.0028). Between T1 and T0, both groups showed larger upper anterior and posterior transversal widths. SG had greater upper anterior (p = 0.0066) and posterior (p = 0.449) sagittal length. RG presented larger lower anterior (p = 0.0012) and posterior (p = 0.0002) transversal widths, while there were no differences in SG lower arch. Discriminant analysis provided two predictive variables with an accuracy of 80.6%: upper anterior length and upper posterior length. Conclusion A shorter and wider maxilla could be a predisposing factor for relapse and failure of the early orthopedic treatment of class III malocclusion patients. The absence of mandibular changes could be predictable for treatment success
Stability prediction of early orthopedic treatment in Class III malocclusion: morphologic discriminant analysis
Abstract Background To evaluate morphologic differences between class III malocclusion success and failure treatment subjects in order to identify which variables are more predictive for long-term stability in early orthopedic treatment. In this retrospective study, 31 patients were enrolled from the Department of Orthodontics (Rome Tor Vergata). Inclusion criteria were as follows: white ancestry, class III malocclusion, mixed dentition, cervical stage (CS) 1-2, no pseudo-class III. Pre-treatment radiographic and cast records were collected. Each patient underwent rapid maxillary expansion/facial mask/bite block (RME/FM/BB) orthopedic treatment until correction. At T1 (permanent dentition, CS4), records were recollected. According to treatment stability, relapse group (RG, 19) and success group (SG, 12) were identified. Sagittal and vertical cephalometric and digital cast measurements were performed. Student’s t tests were used for statistically significant differences inter and intra groups. For discriminant analysis, relapse or success status was added to each patient’s T0 data. Results At T0, RG showed larger upper anterior transversal width (p = 0.0266), while at T1 the upper anterior length was shorter than SG (p = 0.0028). Between T1 and T0, both groups showed larger upper anterior and posterior transversal widths. SG had greater upper anterior (p = 0.0066) and posterior (p = 0.449) sagittal length. RG presented larger lower anterior (p = 0.0012) and posterior (p = 0.0002) transversal widths, while there were no differences in SG lower arch. Discriminant analysis provided two predictive variables with an accuracy of 80.6%: upper anterior length and upper posterior length. Conclusion A shorter and wider maxilla could be a predisposing factor for relapse and failure of the early orthopedic treatment of class III malocclusion patients. The absence of mandibular changes could be predictable for treatment success
The OPERA magnetic spectrometer
The OPERA neutrino oscillation experiment foresees the construction of two
magnetized iron spectrometers located after the lead-nuclear emulsion targets.
The magnet is made up of two vertical walls of rectangular cross section
connected by return yokes. The particle trajectories are measured by high
precision drift tubes located before and after the arms of the magnet.
Moreover, the magnet steel is instrumented with Resistive Plate Chambers that
ease pattern recognition and allow a calorimetric measurement of the hadronic
showers. In this paper we review the construction of the spectrometers. In
particular, we describe the results obtained from the magnet and RPC prototypes
and the installation of the final apparatus at the Gran Sasso laboratories. We
discuss the mechanical and magnetic properties of the steel and the techniques
employed to calibrate the field in the bulk of the magnet. Moreover, results of
the tests and issues concerning the mass production of the Resistive Plate
Chambers are reported. Finally, the expected physics performance of the
detector is described; estimates rely on numerical simulations and the outcome
of the tests described above.Comment: 6 pages, 10 figures, presented at the 2003 IEEE-NSS conference,
Portland, OR, USA, October 20-24, 200
A compact light readout system for longitudinally segmented shashlik calorimeters
The longitudinal segmentation of shashlik calorimeters is challenged by dead
zones and non-uniformities introduced by the light collection and readout
system. This limitation can be overcome by direct fiber-photosensor coupling,
avoiding routing and bundling of the wavelength shifter fibers and embedding
ultra-compact photosensors (SiPMs) in the bulk of the calorimeter. We present
the first experimental test of this readout scheme performed at the CERN PS-T9
beamline in 2015 with negative particles in the 1-5~GeV energy range. In this
paper, we demonstrate that the scheme does not compromise the energy resolution
and linearity compared with standard light collection and readout systems. In
addition, we study the performance of the calorimeter for partially contained
charged hadrons to assess the separation capability and the response of
the photosensors to direct ionization.Comment: To appear in Nuclear Instruments and Methods in Physics Research,
- …