1,472 research outputs found

    Antenna pattern of DUAL detectors of gravitational waves and its exploitation in a network of advanced interferometers

    Get PDF
    We investigate the directional sensitivity to plane gravitational waves (GWs) of DUAL detectors of cylindrical shape. Calculations make use of the finite element method to simulate the responses to the GW Riemann tensor of a single-mass DUAL (SMD) and of a tapered cylinder (TC) in their wide sensitivity bandwidth. We show that one SMD or a pair of TCs is able to cover both GW polarization amplitudes from almost all incoming directions. We discuss the achievable enhancement in tackling the inverse problem for high frequency [~(2–5) kHz] GWs by adding a TC detector to the future advanced LIGO–VIRGO network

    Selective readout and back-action reduction for wideband acoustic gravitational wave detectors

    Full text link
    We present the concept of selective readout for broadband resonant mass gravitational wave detectors. This detection scheme is capable of specifically selecting the signal from the contributions of the vibrational modes sensitive to the gravitational waves, and efficiently rejecting the contribution from non gravitationally sensitive modes. Moreover this readout, applied to a dual detector, is capable to give an effective reduction of the back-action noise within the frequency band of interest. The overall effect is a significant enhancement in the predicted sensitivity, evaluated at the standard quantum limit for a dual torus detector. A molybdenum detector, 1 m in diameter and equipped with a wide area selective readout, would reach spectral strain sensitivities 2x10^{-23}/sqrt{Hz} between 2-6 kHz.Comment: 9 pages, 4 figure

    Calibrated quantum thermometry in cavity optomechanics

    Full text link
    Cavity optomechanics has achieved the major breakthrough of the preparation and observation of macroscopic mechanical oscillators in peculiarly quantum states. The development of reliable indicators of the oscillator properties in these conditions is important also for applications to quantum technologies. We compare two procedures to infer the oscillator occupation number, minimizing the necessity of system calibrations. The former starts from homodyne spectra, the latter is based on the measurement of the motional sidebands asymmetry in heterodyne spectra. Moreover, we describe and discuss a method to control the cavity detuning, that is a crucial parameter for the accuracy of the latter, intrinsically superior procedure

    Dynamical two-mode squeezing of thermal fluctuations in a cavity opto-mechanical system

    Full text link
    We report the experimental observation of two-mode squeezing in the oscillation quadratures of a thermal micro-oscillator. This effect is obtained by parametric modulation of the optical spring in a cavity opto-mechanical system. In addition to stationary variance measurements, we describe the dynamic behavior in the regime of pulsed parametric excitation, showing enhanced squeezing effect surpassing the stationary 3dB limit. While the present experiment is in the classical regime, our technique can be exploited to produce entangled, macroscopic quantum opto-mechanical modes

    DNA quantification to assess Zymoseptoria tritici on a susceptible cultivar of durum wheat to establish the best timing for fungicide application in an italian environment

    Get PDF
    Zymoseptoria tritici, a globally distributed pathogen, is responsible of Septoria tritici blotch (STB), one of the most damaging wheat diseases. In Italy the incidence of STB has increased during the past few years. The presence of Z. tritici on flag leaves of susceptible durum wheat plants, cultivar San Carlo, after a single artificial inoculation with two inoculum concentrations at different vegetative stages has been evaluated in the plain of Bologna (North of Italy), in a two year field study (2012–2013). The pathogen presence was also assessed in natural infection conditions after a fungicide application in the second year (2013). The results obtained, by visual examination (Incidence, Disease Severity) and DNA quantification by Real time PCR, demonstrated that BBCH 39 (flag leaf stage) is the most susceptible vegetative stage, independently of inoculum concentration and climatic conditions. A good correlation between Disease Severity and DNA quantity was observed in either sampling methods, entire flag leaves and flag leaf discs. Thereafter the most suitable period to obtain the best crop protection with only one fungicide treatment is the flag leaf stage

    Correlation between Gamma-Ray bursts and Gravitational Waves

    Get PDF
    The cosmological origin of γ\gamma-ray bursts (GRBs) is now commonly accepted and, according to several models for the central engine, GRB sources should also emit at the same time gravitational waves bursts (GWBs). We have performed two correlation searches between the data of the resonant gravitational wave detector AURIGA and GRB arrival times collected in the BATSE 4B catalog. No correlation was found and an upper limit \bbox{hRMS1.5×1018h_{\text{RMS}} \leq 1.5 \times 10^{-18}} on the averaged amplitude of gravitational waves associated with γ\gamma-ray bursts has been set for the first time.Comment: 7 pages, 3 figures, submitted to Phys. Rev.

    Control of Recoil Losses in Nanomechanical SiN Membrane Resonators

    Get PDF
    In the context of a recoil damping analysis, we have designed and produced a membrane resonator equipped with a specific on-chip structure working as a "loss shield" for a circular membrane. In this device the vibrations of the membrane, with a quality factor of 10710^7, reach the limit set by the intrinsic dissipation in silicon nitride, for all the modes and regardless of the modal shape, also at low frequency. Guided by our theoretical model of the loss shield, we describe the design rationale of the device, which can be used as effective replacement of commercial membrane resonators in advanced optomechanical setups, also at cryogenic temperatures

    Study of fungal colonization of wheat kernels in Syria with a focus on Fusarium species

    Get PDF
    Wheat is one of the main crops in Mediterranean countries, and its cultivation has an important role in the Syrian economy. In Syria, Fusarium head blight (FHB) has not been reported so far. Mycological analysis of 48 samples of wheat kernels collected from cultivation areas with different climatic conditions were performed in 2009 and 2010. Fungal isolates were identified at the genus level morphologically; Fusarium species were characterized morphologically and by species-specific PCR. The most frequent fungal genera found were Alternaria spp. and Cladosporium spp., with frequencies of 24.7% and 8.1%, respectively, while the frequency of Fusarium spp. was 1.5% of kernels. Most frequent Fusarium species were F. tricinctum (30% of all Fusarium isolates), F. culmorum (18%), F. equiseti (14%) and F. graminearum (13%). The mycotoxin production potential of selected Fusarium isolates was assessed by HPLC-MS analysis of rice cultures; chemotyping by PCR was carried out for comparison. All six F. graminearum strains tested produced small amounts (<3 mg/kg) of nivalenol (NIV). All ten F. culmorum strains tested produced large amounts of trichothecenes (>100 mg/kg); four strains produced NIV and six strains produced deoxynivalenol (DON) and 3-acetyl-deoxynivalenol (3Ac-DON). PCR chemotyping lead to an oversimplified picture, because all 3Ac-DON chemotype strains produced more DON than 3Ac-DON; furthermore, the strongest NIV producers produced significant amounts of DON. All tested strains of F. culmorum, F. graminearum, F. pseudograminearum (two strains) and most F. equiseti strains (five of six strains) produced zearalenone. Grains of durum wheat were more frequently colonized by Fusarium spp. than grains of soft wheat. Incidence of Fusarium spp. in irrigated fields was higher than in rainfed fields. The incidence of Fusarium strains producing mycotoxins raises concerns about the risk of Fusarium head blight to Syria and its consequences for public healt

    Internal-strain mediated coupling between polar Bi and magnetic Mn ions in the defect-free quadruple-perovskite BiMn3_3Mn4_4O12_{12}

    Full text link
    By means of neutron powder diffraction, we investigated the effect of the polar Bi3+^{3+} ion on the magnetic ordering of the Mn3+^{3+} ions in BiMn3_3Mn4_4O12_{12}, the counterpart with \textit{quadruple} perovskite structure of the \textit{simple} perovskite BiMnO3_3. The data are consistent with a \textit{noncentrosymmetric} spacegroup ImIm which contrasts the \textit{centrosymmetric} one I2/mI2/m previously reported for the isovalent and isomorphic compound LaMn3_3Mn4_4O12_{12}, which gives evidence of a Bi3+^{3+}-induced polarization of the lattice. At low temperature, the two Mn3+^{3+} sublattices of the AA' and BB sites order antiferromagnetically (AFM) in an independent manner at 25 and 55 K, similarly to the case of LaMn3_3Mn4_4O12_{12}. However, both magnetic structures of BiMn3_3Mn4_4O12_{12} radically differ from those of LaMn3_3Mn4_4O12_{12}. In BiMn3_3Mn4_4O12_{12} the moments MA\textbf{M}_{A'} of the AA' sites form an anti-body AFM structure, whilst the moments \textbf{M}B_{B} of the BB sites result from a large and \textit{uniform} modulation ±MB,b\pm \textbf{M}_{B,b} along the b-axis of the moments \textbf{M}B,ac_{B,ac} in the acac-plane. The modulation is strikingly correlated with the displacements of the Mn3+^{3+} ions induced by the Bi3+^{3+} ions. Our analysis unveils a strong magnetoelastic coupling between the internal strain created by the Bi3+^{3+} ions and the moment of the Mn3+^{3+} ions in the BB sites. This is ascribed to the high symmetry of the oxygen sites and to the absence of oxygen defects, two characteristics of quadruple perovskites not found in simple ones, which prevent the release of the Bi3+^{3+}-induced strain through distortions or disorder. This demonstrates the possibility of a large magnetoelectric coupling in proper ferroelectrics and suggests a novel concept of internal strain engineering for multiferroics design.Comment: 9 pages, 7 figures, 5 table
    corecore