1,746 research outputs found
Comparative study of imiquimod 3.75% vs. photodynamic therapy for actinic keratosis of the scalp
Background/purpose: To assess efficacy, tolerability, adverse effects, recurrence, and aesthetic results of imiquimod 3.75% vs. photodynamic therapy with 5-aminolaevulinic acid (MAL-PDT) for actinic keratosis (AK). Methods: A small randomized, intraindividual right-left pilot study for AK treatment of multiple scalp lesions was performed. Patients were treated with imiquimod and subsequently MAL-PDT (on opposite sides of the scalp) 14 days apart. Study end points were evaluated with clinical and dermoscopic examinations at 1, 3, 6, and 12 months. Results: Nine male bald patients were enrolled. Imiquimod achieved a slightly higher overall clearance rate than MAP-PDT (68.1% vs 56.5%). According to AK degree of severity, clearance rates were greater for degree I and III with imiquimod (68.8%, 64.5% and 75% with imiquimod vs. 48%, 69.8%, and 66.7% for MAL-PDT, respectively). At 12 months, a slightly higher total recurrence rate was noted for imiquimod compared with MAL-PDT (9.9% vs. 8.6%); new lesions were 2 degree I for imiquimod and 4 degree I for MAL-PDT. For both treatments, pain was moderate/strong (even if MAL-PDT seems to be less tolerable) adverse effects are common and transient; aesthetic results excellent. Conclusion: Both imiquimod and MAL-PDT were effective in the reduction in the number of AK. In the long-term, both present a good effectiveness maintained over time with excellent aesthetic results. A combination or sequential therapy could optimize the management of the cancerization field
Design and Test of the Off-Detector Electronics for the CMS Barrel Muon Trigger
Drift Tubes chambers are used in the CMS barrel for tagging the passage of high Pt muons generated in a LHC event and for triggering the CMS data read out. The Sector Collector (SC) system synchronizes the track segments built by trigger modules on the chambers and deliver them to reconstruction processors (Track Finder, TF) that assemble full muon tracks. Then, the Muon Sorter (MS) has to select the best four candidates in the barrel and to filter fake muons generated by the TF system redundancy. The hardware implementations of the Sector Collector and Muon Sorter systems satisfy radiation, I/O and fast timing constraints using several FPGA technologies. The hardware was tested with custom facilities, integrated with other trigger subsystems, and operated in a beam test. A test beam on a 40 MHz bunched beam validated the local trigger electronics and off-detector prototype cards and the synchronization tools. The CMS Magnet Test and Cosmic challenge in 2006 proved stable and reliable operation of the Drift Tubes trigger and its integration with other trigger systems and with the readout system. Constraints, design, test and operation of the modules are presented
Use of antifuse-FPGAs in the Track-Sorter-Master of the CMS Drift Tube Chambers
The front-end system of the Silicon Drift Detectors (SDDs) of the ALICE experiment is made of two ASICs. The first chip performs the preamplification, temporary analogue storage and analogue-to-digital conversion of the detector signals. The second chip is a digital buffer that allows for a significant reduction of the connection from the front-end module to the outside world. In this paper, the results achieved on the first complete prototype of the front-end system for the SDDs of ALICE are presented
DT Sector Collector electronics design and construction
The CMS detector at LHC is equipped with Drift Tubes (DT) chambers for muon detection and triggering in the barrel region. The Sector Collector (SC) modules collect the track segments reconstructed by on-chamber trigger electronics. Data from different chambers are aligned in time and sent to the subsequent reconstruction processors via optical links. Several FPGA devices performing the processing of the data were designed in VHDL, including spy features to monitor the trigger data flow. A test jig was set up with custom hardware and software in order to fully validate final production boards. Installation and commissioning in CMS provided first experience with the synchronization and monitoring tools
Field emission properties of carbon nanotube arrays grown in porous anodic alumina
AbstractCarbon nanotubes (CNTs), with their excellent electronic properties and extremely high aspect ratio, represent an ideal material for building electron sources based on field emission. FowlerâNordheim equation describes quite successfully the field emission phenomenon, especially for single or isolated tips. However, some complications arise when populations of CNTs are considered, where collective effects and large variability in the emitters features influence the measured IâV characteristics. In this work, the emission properties of multiâwalled CNTs grown within ordered anodic alumina templates are investigated. These CNT matrices produce current densities up to some tens of mA/cm2, and the field enhancement factor for collective emission sources can be estimated. Such material can be modelled as an ordered and uniform array of emitters and a simulation of the electrostatic field on the emission tips can be done in order to evaluate the field enhancement factor and its dependence on various geometries. This allows comparing predictions from simulation and experimental measurements, in a direct way. (© 2009 WILEYâVCH Verlag GmbH & Co. KGaA, Weinheim
Numerical simulations on laser absorption enhancement in hybrid metallo-dielectric nanostructured targets for future nuclear astrophysics experiments
The linear electromagnetic interaction between innovative hybrid metallo-dielectric nanostructured targets and laser in visible and IR range is investigated through numerical simulations. The obtained results rely on the optimization of a target based on metallic nanowires (NWs) to enhance light absorption in the visible range of the electromagnetic spectrum. The NWs are grown within the ordered nanoholes of an alumina substrate, thus, forming a plasmonic lattice with triangular symmetry. The remaining volume of the nanoholes on top of the NWs is sealed with a transparent layer of aluminum oxide that is suitable to be chemically modified for containing about 25% of deuterium atoms. The study presented here is carried out within the framework of a scientific program named PLANETA (Plasmonic Laser Absorption on Nano-Engineered Targets) aiming at investigating new laserâmatter interaction schemes in the ns domain and for nuclear fusion purposes, involving especially the DâD reaction
Effectiveness of Two Different Fluoride-Based Agents in the Treatment of Dentin Hypersensitivity: A Prospective Clinical Trial
Hyperesthesia is related to increased sensitivity of dental tissues to mechanical, chemical and thermal stimuli. The aim of this prospective clinical trial was to compare the effectiveness of a calcium-fluoride-forming agent (TiefenfluoridÂź, Humanchemie GmbH, Alfeld, Germany) with that of a fluoride varnish (Enamelastâą, Ultradent Inc., Cologne, Germany) in the treatment of dental hyperesthesia in adult patients. In total, 176 individuals (106 females and 70 males, aged 18â59 years old) diagnosed with dental hyperesthesia (DH) were enrolled. The main clinical symptoms were hyperesthesia from coldness and sweetness during chewing; the types of clinical lesions were also determined and recorded. The patients were selected randomly and divided into two groups: (i) the first group of 96 patients was treated with TiefenfluoridÂź applied in three appointments at 7-day intervals; (ii) the second group of 80 patients was treated with Enamelastâą, applied seven times at 7-day intervals. All the patients were recalled 7 days, 14 days, 1 month, 3 months, and 6 months from the last application. At the baseline and during every follow-up visit, the DH was measured with a pulp tester. A random intercept/random slope model was used to evaluate the effect of the treatment, at various times with respect to the initial diagnosis. Within the limits of the present study, TiefenfluoridÂź was more effective than Enamelastâą against DH in that it provided long-lasting results, with a significant improvement still detected at the latest 6-month follow-up
Measurement of triple gauge boson couplings from WW production at LEP energies up to 189 GeV
A measurement of triple gauge boson couplings is presented, based on W-pair
data recorded by the OPAL detector at LEP during 1998 at a centre-of-mass
energy of 189 GeV with an integrated luminosity of 183 pb^-1. After combining
with our previous measurements at centre-of-mass energies of 161-183 GeV we
obtain k_g=0.97 +0.20 -0.16, g_1^z=0.991 +0.060 -0.057 and lambda_g=-0.110
+0.058 -0.055, where the errors include both statistical and systematic
uncertainties and each coupling is determined by setting the other two
couplings to their SM values. These results are consistent with the Standard
Model expectations.Comment: 28 pages, 8 figures, submitted to Eur. Phys. J.
Bose-Einstein Correlations in e+e- to W+W- at 172 and 183 GeV
Bose-Einstein correlations between like-charge pions are studied in hadronic
final states produced by e+e- annihilations at center-of-mass energies of 172
and 183 GeV. Three event samples are studied, each dominated by one of the
processes W+W- to qqlnu, W+W- to qqqq, or (Z/g)* to qq. After demonstrating the
existence of Bose-Einstein correlations in W decays, an attempt is made to
determine Bose-Einstein correlations for pions originating from the same W
boson and from different W bosons, as well as for pions from (Z/g)* to qq
events. The following results are obtained for the individual chaoticity
parameters lambda assuming a common source radius R: lambda_same = 0.63 +- 0.19
+- 0.14, lambda_diff = 0.22 +- 0.53 +- 0.14, lambda_Z = 0.47 +- 0.11 +- 0.08, R
= 0.92 +- 0.09 +- 0.09. In each case, the first error is statistical and the
second is systematic. At the current level of statistical precision it is not
established whether Bose-Einstein correlations, between pions from different W
bosons exist or not.Comment: 24 pages, LaTeX, including 6 eps figures, submitted to European
Physical Journal
- âŠ