35 research outputs found
TCO Nanostructures as building blocks for nanophotonic devices in the infrared
Transparent conducting oxides (TCOs), in general, are degenerated
semiconductors with large electronic band-gap. They have been widely used for
display screens, optoelectronic, photonic, and photovoltaic devices due to
their unique dual transparent and conductive properties. In this study, we
report in detail a technique that we developed to fabricate single crystal TCO
nanorod arrays with controlled conductivity, height, and lattice spacing in a
simple one-zone tube furnace system. We demonstrate how novel
photonic/plasmonic properties can be obtained by selecting unique combinations
of these basic parameters of the nano-rod arrays.Comment: 5 figures, SPIE Optics and Photonics 201
PMMA-Assisted Plasma Patterning of Graphene
Microelectronic fabrication of Si typically involves high-temperature or high-energy processes. For instance, wafer fabrication, transistor fabrication, and silicidation are all above 500°C. Contrary to that tradition, we believe low-energy processes constitute a better alternative to enable the industrial application of single-molecule devices based on 2D materials. The present work addresses the postsynthesis processing of graphene at unconventional low temperature, low energy, and low pressure in the poly methyl-methacrylate- (PMMA-) assisted transfer of graphene to oxide wafer, in the electron-beam lithography with PMMA, and in the plasma patterning of graphene with a PMMA ribbon mask. During the exposure to the oxygen plasma, unprotected areas of graphene are converted to graphene oxide. The exposure time required to produce the ribbon patterns on graphene is 2 minutes. We produce graphene ribbon patterns with ∼50 nm width and integrate them into solid state and liquid gated transistor devices.)e submitted manuscript has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory (“Argonne”). Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract DE-AC02-06CH11357. )e U.S. Government retains for itself, and others acting on its behalf, a paid-up nonexclusive, irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copies to the public, and perform publicly and display publicly, by or on behalf of the government.
Funding text #2
)e Center for Nanoscale Materials was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract DE-AC02-06CH11357. )e authors also acknowledge financial support from Argonne National Laboratory’s Laboratory-Directed Research and Development Strategic Initiative.Revisión por pare
Metal-assisted etching of silicon molds for electroforming
Ordered arrays of high-aspect-ratio micro/nanostructures in semiconductors stirred a huge scientific interest due to their unique one-dimensional physical morphology and the associated electrical, mechanical, chemical, optoelectronic, and thermal properties. Metal-assisted chemical etching enables fabrication of such high aspect ratio Si nanostructures with controlled diameter, shape, length, and packing density, but suffers from structure deformation and shape inconsistency due to uncontrolled migration of noble metal structures during etching. Hereby the authors prove that a Ti adhesion layer helps in stabilizing gold structures, preventing their migration on the wafer surface while not impeding the etching. Based on this finding, the authors demonstrate that the method can be used to fabricate linear Fresnel zone plates
Highly tunable ultra-narrow-resonances with optical nano-antenna phased arrays in the infrared
We report our recent development in pursuing high Quality-Factor (high-Q
factor) plasmonic resonances, with vertically aligned two dimensional (2-D)
periodic nanorod arrays. The 2-D vertically aligned nano-antenna array can have
high-Q resonances varying arbitrarily from near infrared to terahertz regime,
as the antenna resonances of the nanorod are highly tunable through material
properties, the length of the nanorod, and the orthogonal polarization
direction with respect to the lattice surface,. The high-Q in combination with
the small optical mode volume gives a very high Purcell factor, which could
potentially be applied to various enhanced nonlinear photonics or
optoelectronic devices. The 'hot spots' around the nanorods can be easily
harvested as no index-matching is necessary. The resonances maintain their
high-Q factor with the change of the environmental refractive index, which is
of great interest for molecular sensing.Comment: 8 pages, appears in Proc. SPIE 9163, Plasmonics: Metallic
Nanostructures and Their Optical Properties XII, 91630R (September 10, 2014
The Nanolithography Toolbox
This article introduces in archival form the Nanolithography Toolbox, a platform-independent software package for scripted lithography pattern layout generation. The Center for Nanoscale Science and Technology (CNST) at the National Institute of Standards and Technology (NIST) developed the Nanolithography Toolbox to help users of the CNST NanoFab design devices with complex curves and aggressive critical dimensions. Using parameterized shapes as building blocks, the Nanolithography Toolbox allows users to rapidly design and layout nanoscale devices of arbitrary complexity through scripting and programming. The Toolbox offers many parameterized shapes, including structure libraries for micro- and nanoelectromechanical systems (MEMS and NEMS) and nanophotonic devices. Furthermore, the Toolbox allows users to precisely define the number of vertices for each shape or create vectorized shapes using Bezier curves. Parameterized control allows users to design smooth curves with complex shapes. The Toolbox is applicable to a broad range of design tasks in the fabrication of microscale and nanoscale devices
Multifunctional UV and Gas Sensors Based on Vertically Nanostructured Zinc Oxide: Volume Versus Surface Effect
This article reports that it is possible to make multifunctional sensing devices with ZnO infiltrated polymers while the sensing interactions could occur throughout the polymer. As such, we find that infiltrated devices with SU-8 polymer can result in highly sensitive UV sensors. Mesh dielectric core devices were found to make sensitive gas sensors with a better than 5 ppm sensitivity for formaldehyde and NO2. A new type of p-n junction device is further demonstrated that is sensitive to UV illumination, thus making it an enhanced UV sensor. Sensing devices relying on volume interactions, such as light absorption, can significantly benefit from the infiltrated polymer. In contrast, devices that rely on surface interactions, such as gas sensors, do not gain performance in any significant way with or without the infiltrated polymer
Multifunctional UV and Gas Sensors Based on Vertically Nanostructured Zinc Oxide: Volume Versus Surface Effect
This article reports that it is possible to make multifunctional sensing devices with ZnO infiltrated polymers while the sensing interactions could occur throughout the polymer. As such, we find that infiltrated devices with SU-8 polymer can result in highly sensitive UV sensors. Mesh dielectric core devices were found to make sensitive gas sensors with a better than 5 ppm sensitivity for formaldehyde and NO2. A new type of p-n junction device is further demonstrated that is sensitive to UV illumination, thus making it an enhanced UV sensor. Sensing devices relying on volume interactions, such as light absorption, can significantly benefit from the infiltrated polymer. In contrast, devices that rely on surface interactions, such as gas sensors, do not gain performance in any significant way with or without the infiltrated polymer