27 research outputs found
Understanding structure of pharmaceutical organic solids in confined media
Mesoporous silicas have attracted growing attention in pharmaceutical drug delivery due to their synthetically tailored pore diameters, large pore volume and surface area. The narrow distribution of the pores makes mesoporous silicas exciting as nano-size crystallisation chambers for studies of molecular aggregation and drug polymorphism. Determination and understanding of structure and dynamics of confined solids presents significant analytical challenge due to lack of long range ordering. In this work we demonstrate how solid-state NMR can gain molecular insight into the structures of confined pharmaceuticals which are not accessible with other techniques. Using NMR as a probe for local mobility we demonstrated differences in the molecular dynamics of confined pre-nucleating species as compared to the confined crystals and amorphous molecules embedded in seemingly uniform composites.
Indomethacin, tolbutamide and flufenamic acid were chosen as model systems. These compounds differ significantly in structural flexibility leading to a large number of polymorphs and challenges in controlling the phase transitions. Crystallisation processes from amorphous state into confined solvate and stable form V of indomethacin were monitored inside the pores of ca. 30 nm. Using 13C and 1H solid-state NMR we controlled the formation of metastable tolbutamide form V inside the pores of 3 nm, followed by its recrystallisation into the most stable form IH. Using 19F NMR and 19F T1 relaxation measurements we were able to gain molecular level insight into the crystallisation mechanisms of confined crystals, as we demonstrated the formation of a liquid-like layer on the silica surface prior to the build-up of confined crystal of flufenamic acid. All findings from NMR measurements were corroborated with PXRD, DSC and N2 adsorption proving the presence of nano confined crystals.
Combined application of nano-size crystallisation methodology and solid-state NMR spectroscopy is essential in directing molecular aggregation and answering fundamental questions on self-assembly of crystalline solids
Physicochemical characterization and dissolution studies of acyclovir solid dispersions with Pluronic F127 prepared by the kneading method
The dissolution rate of anhydrous acyclovir was improved by the preparation of physical mixtures and solid dispersions with the non-ionic polymer Pluronic F127 using the kneading method at different drug-to-polymer ratios. The obtained physical mixtures and solid -dispersions were examined in terms of drug content and possible physical and chemical interactions between the drug and polymer using FTIR spectral studies, differential scanning calorimetry and powder X-ray diffraction analysis. The dissolution rate of acyclovir was determined using the rotating disk method. It was found that the minimal content of the polymer within the mixtures needed to increase the dissolution rate of the drug was 50 %
Nanocrystallization of Rare Tolbutamide Form V in Mesoporous MCM-41 Silica
Encapsulation of pharmaceuticals inside nanoporous materials is of increasing interest due to their possible applications as new generation therapeutics, theranostic platforms, or smart devices. Mesoporous silicas are leading materials to be used as nanohosts for pharmaceuticals. Further development of new generation of nanoscale therapeutics requires complete understanding of the complex host−guest interactions of organic molecules confined in nanosized chambers at different length scales. In this context, we present results showing control over formation and phase transition of nanosize crystals of model flexible pharmaceutical molecule tolbutamide confined inside 3.2 nm pores of the MCM-41 host. Using low loading levels (up to 30 wt %), we were able to stabilize the drug in highly dynamic amorphous/disordered state or direct the crystallization of the drug into highly metastable nanocrystalline form V of tolbutamide (at loading levels of 40 and 50 wt %), providing first experimental evidence for crystallization of pharmaceuticals inside the pores as narrow as 3.2 nm
Mechanistic and kinetic insight into spontaneous cocrystallisation of isoniazid and benzoic acid
Solid-state cocrystallisation is of contemporary interest, because it offers an easy and efficient way to produce cocrystals, which are recognized as prospective pharmaceutical materials. Research explaining solid-state cocrystallisation mechanisms is important, but still too scarce to give a broad understanding of factors governing and limiting these reactions. Here we report an investigation of the mechanism and kinetics of isoniazid cocrystallisation with benzoic acid. This reaction is spontaneous; however its rate is greatly influenced by environmental conditions (humidity and temperature) and pre-treatment (milling) of the sample. The acceleration of cocrystallisation in the presence of moisture is demonstrated by kinetic studies at elevated humidity. The rate dependence on humidity stems from moisture facilitated rearrangements on the surface of isoniazid crystallites, which lead to cocrystallisation in the presence of benzoic acid vapour. Furthermore, pre-milling the mixture of the cocrystal ingredients eliminated the induction time of the reaction and considerably increased its rate
Solvent driven phase transitions of acyclovir-the role of water and solvent polarity
Acyclovir, an antiviral purine derivative listed on the WHO's Model List of Essential Medicines, is commonly used in several different dosage forms from tablets to gels, oleogels and suspensions. Although temperature driven phase transitions of its commercially available 3 : 2 hydrate have been known since 2011, information on the solvent driven phase transitions of this drug has been limited. This study identifies the pathways of transformations of acyclovir forms I and V induced by organic solvents and water using the method of solution mediated phase transformation. The 3 : 2 hydrate, form V, undergoes dehydration to anhydrous form I in methanol, ethanol and N,N-dimethylformamide. Form I converts to anhydrous form II in dry methanol and N,N-dimethylformamide, while increased water content in the solvent prevents the transformation of form I to form II. Both forms I and V yield a gel-like material in dimethyl sulfoxide, composed of highly crystalline form II and reported here for the first time. Furthermore, significant differences in the thermal dehydration process of forms V and VI were observed using VT FTIR, including the first time report on a novel metastable ACV form VII formed upon dehydration of ACV dihydrate (form VI). High resolution solid-state NMR spectra of two anhydrous polymorphs (forms I and II) and two hydrates (forms V and VI) supported by DFT calculations using the CASTEP code are also presented
Structure and Mobility of Lactose in Lactose/Sodium Montmorillonite Nanocomposites
This study aims at investigating the molecular level organization and molecular mobility in montmorillonite nanocomposites with the uncharged organic low-molecular-weight compound lactose commonly used in pharmaceutical drug delivery, food technology, and flavoring. Nanocomposites were prepared under slow and fast drying conditions, attained by drying at ambient conditions and by spray-drying, respectively. A detailed structural investigation was performed with modulated differential scanning calorimetry, powder X-ray diffraction, solid-state nuclear magnetic resonance, scanning electron microscopy, microcalorimetry, and molecular dynamic simulations. The lactose was intercalated in the sodium montmorillonite interlayer space regardless of the clay content, drying rate, or humidity exposure. Although, the spray-drying resulted in higher proportion of intercalated lactose compared with the drying under ambient conditions, non-intercalated lactose was present at 20 wt% lactose content. This indicates limitations in maximum load capacity of nonionic organic substances into the montmorillonite interlayer space. Furthermore, a fraction of the intercalated lactose in the co-spray-dried nanocomposites diffused out from the clay interlayer space upon humidity exposure. Also, the lactose in the nanocomposites demonstrated higher molecular mobility than that of neat amorphous lactose. This study provides a foundation for understanding functional properties of nanocomposites, such as loading capacity and physical stability
Supramolecular Amino Acid Based Hydrogels: Probing the Contribution of Additive Molecules using NMR Spectroscopy
Supramolecular hydrogels are composed of self-assembled solid networks that restrict the flow of water. l-Phenylalanine is the smallest molecule reported to date to form gel networks in water, and it is of particular interest due to its crystalline gel state. Single and multi-component hydrogels of l-phenylalanine are used herein as model materials to develop an NMR-based analytical approach to gain insight into the mechanisms of supramolecular gelation. Structure and composition of the gel fibres were probed using PXRD, solid-state NMR experiments and microscopic techniques. Solution-state NMR studies probed the properties of free gelator molecules in an equilibrium with bound molecules. The dynamics of exchange at the gel/solution interfaces was investigated further using high-resolution magic angle spinning (HR-MAS) and saturation transfer difference (STD) NMR experiments. This approach allowed the identification of which additive molecules contributed in modifying the material properties
Halogen effects on the solid-state packing of phenylalanine derivatives and the resultant gelation properties
Phenylalanine is an important amino acid both biologically, essential to human health, and industrially, as a building block of artificial sweeteners. Our interest in this particular amino acid and its derivatives lies with its ability to form gels in a number of solvents. We present here the studies of the influence of halogen addition to the aromatic ring on the gelation properties and we analyse the crystal structures of a number of these materials to elucidate the trends in their behaviour based on the halogen addition to the aromatic group and the interactions that result
Structural Properties, Order-Disorder Phenomena and Phase Stability of Orotic Acid Crystal Forms
Orotic acid (OTA) is reported to exist in the anhydrous (AH), monohydrate (Hy1) and dimethylsulfoxide monosolvate (SDMSO) forms. In this study we investigate the (de)hydration/desolvation behavior, aiming at an understanding of the elusive structural features of anhydrous OTA by a combination of experimental and computational techniques, namely, thermal analytical methods, gravimetric moisture (de)sorption studies, water activity measurements, X-ray powder diffraction, spectroscopy (vibrational, solid-state NMR), crystal energy landscape and chemical shift calculations. The Hy1 is a highly stable hydrate, which dissociates above 135°C and loses only a small part of the water when stored over desiccants (25°C) for more than one year. In Hy1, orotic acid and water molecules are linked by strong hydrogen bonds in nearly perfectly planar arranged stacked layers. The layers are spaced by 3.1 Å and not linked via hydrogen-bonds. Upon dehydration the X-ray powder diffraction and solid-state NMR peaks become broader indicating some disorder in the anhydrous form. The Hy1 stacking reflection (122) is maintained, suggesting that the OTA molecules are still arranged in stacked layers in the dehydration product. Desolvation of SDMSO, a non-layer structure, results in the same AH phase as observed upon dehydrating Hy1. Depending on the desolvation conditions different levels of order-disorder of layers present in anhydrous OTA are observed, which is also suggested by the computed low energy crystal structures. These structures provide models for stacking faults as intergrowth of different layers is possible. The variability in anhydrate crystals is of practical concern as it affects the moisture dependent stability of AH with respect to hydration
Molecular level characterisation of the surface of carbohydrate-functionalised mesoporous silica nanoparticles (MSN) as a potential targeted drug delivery system via high resolution magic angle spinning (HR-MAS) NMR Spectroscopy
Atomistic level characterisation of external surface species of mesoporous silica nanomaterials (MSN) poses a significant analytical challenge due to the inherently low content of grafted ligands. This study proposes the use of HR-MAS NMR spectroscopy for a molecular level characterisation of the external surface of carbohydrate-functionalised nanoparticles. MSN differing in size (32 nm, 106 nm, 220 nm) were synthesised using the sol-gel method. The synthesised materials displayed narrow particle size distribution (based on DLS and TEM results) and a hexagonal arrangement of the pores with a diameter of ca. 3 nm as investigated with PXRD and N2 physisorption. The surface of the obtained nanoparticles was functionalised with galactose and lactose using reductive amination as confirmed by FTIR and NMR techniques. The functionalisation of the particles surface did not alter the pore architecture, structure or morphology of the materials as confirmed with TEM imaging. HR-MAS NMR spectroscopy was used for the first time to investigate the structure of the functionalised MSNs suspended in D2O. Furthermore, lactose was successfully attached to the silica without breaking the glycosidic bond. The results demonstrate that HR-MAS NMR can provide detailed structural information on the organic functionalities attached at the external surface of MSN within short experimental times