1,645 research outputs found
Multirate sampled-data yaw-damper and modal suppression system design
A multirate control law synthesized algorithm based on an infinite-time quadratic cost function, was developed along with a method for analyzing the robustness of multirate systems. A generalized multirate sampled-data control law structure (GMCLS) was introduced. A new infinite-time-based parameter optimization multirate sampled-data control law synthesis method and solution algorithm were developed. A singular-value-based method for determining gain and phase margins for multirate systems was also developed. The finite-time-based parameter optimization multirate sampled-data control law synthesis algorithm originally intended to be applied to the aircraft problem was instead demonstrated by application to a simpler problem involving the control of the tip position of a two-link robot arm. The GMCLS, the infinite-time-based parameter optimization multirate control law synthesis method and solution algorithm, and the singular-value based method for determining gain and phase margins were all demonstrated by application to the aircraft control problem originally proposed for this project
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part II: Extrusion Process Control
Part I of this paper provided a detailed description of a novel fabrication machine for high solids
loading ceramic slurry extrusion and presented an empirical model of the ceramic extrusion
process, with ram velocity as the input and extrusion force as the output. A constant force is
desirable in freeform extrusion processes as it correlates with a constant material deposition rate
and, thus, good part quality. The experimental results in Part I demonstrated that a constant ram
velocity will produce a transient extrusion force. In some instances the extrusion force increased
until ram motor skipping occurred. Further, process disturbances, such as air bubble release and
nozzle clogging that cause sudden changes in extrusion force, were often present. In this paper a
feedback controller for the ceramic extrusion process is designed and experimentally
implemented. The controller intelligently adjusts the ram motor velocity to maintain a constant
extrusion force. Since there is tremendous variability in the extrusion process characteristics, an
on-off controller is utilized in this paper. Comparisons are made between parts fabricated with
and without the feedback control. It is demonstrated that the use of the feedback control reduces
the effect of process disturbances (i.e., air bubble release and nozzle clogging) and dramatically
improves part quality.Mechanical Engineerin
Freeform Extrusion of High Solids Loading Ceramic Slurries, Part I: Extrusion Process Modeling
A novel solid freeform fabrication method has been developed for the manufacture of
ceramic-based components in an environmentally friendly fashion. The method is based on the
extrusion of ceramic slurries using water as the binding media. Aluminum oxide (Al2O3) is
currently being used as the part material and solids loading as high as 60 vol. % has been
achieved. This paper describes a manufacturing machine that has been developed for the
extrusion of high solids loading ceramic slurries. A critical component of the machine is the
deposition system, which consists of a syringe, a plunger, a ram actuated by a motor that forces
the plunger down to extrude material, and a load cell to measure the extrusion force. An
empirical, dynamic model of the ceramic extrusion process, where the input is the commanded
ram velocity and the output is the extrusion force, is developed. Several experiments are
conducted and empirical modeling techniques are utilized to construct the dynamic model. The
results demonstrate that the ceramic extrusion process has a very slow dynamic response, as
compared to other non-compressible fluids such as water. A substantial amount of variation
exists in the ceramic extrusion process, most notably in the transient dynamics, and a constant
ram velocity may either produce a relatively constant steady-state extrusion force or it may cause
the extrusion force to steadily increase until the ram motor skips. The ceramic extrusion process
is also subjected to significant disturbances such as air bubble release, which causes a dramatic
decrease in the extrusion force, and nozzle clogging, which causes the extrusion force to slowly
increase until the clog is released or the ram motor skips.Mechanical Engineerin
Multirate flutter suppression system design for the Benchmark Active Controls Technology Wing
To study the effectiveness of various control system design methodologies, the NASA Langley Research Center initiated the Benchmark Active Controls Project. In this project, the various methodologies will be applied to design a flutter suppression system for the Benchmark Active Controls Technology (BACT) Wing (also called the PAPA wing). Eventually, the designs will be implemented in hardware and tested on the BACT wing in a wind tunnel. This report describes a project at the University of Washington to design a multirate flutter suppression system for the BACT wing. The objective of the project was two fold. First, to develop a methodology for designing robust multirate compensators, and second, to demonstrate the methodology by applying it to the design of a multirate flutter suppression system for the BACT wing. The contributions of this project are (1) development of an algorithm for synthesizing robust low order multirate control laws (the algorithm is capable of synthesizing a single compensator which stabilizes both the nominal plant and multiple plant perturbations; (2) development of a multirate design methodology, and supporting software, for modeling, analyzing and synthesizing multirate compensators; and (3) design of a multirate flutter suppression system for NASA's BACT wing which satisfies the specified design criteria. This report describes each of these contributions in detail. Section 2.0 discusses our design methodology. Section 3.0 details the results of our multirate flutter suppression system design for the BACT wing. Finally, Section 4.0 presents our conclusions and suggestions for future research. The body of the report focuses primarily on the results. The associated theoretical background appears in the three technical papers that are included as Attachments 1-3. Attachment 4 is a user's manual for the software that is key to our design methodology
Aqueous-Based Extrusion Fabrication of Ceramics on Demand
Aqueous-Based Extrusion Fabrication is an additive manufacturing technique that
extrudes ceramic slurries of high solids loading layer by layer for part fabrication. The
material reservoir in a previously developed system has been modified to allow for
starting and stopping of the extrusion process on demand. Design pros and cons are
examined and a comparison between two material reservoir designs is made. Tests are
conducted to determine the optimal deposition parameters for starting and stopping the
extrudate on demand. The collected test data is used for the development of a deposition
strategy that improves material deposition consistency, including reduced material
buildup at sharp corners. Example parts are fabricated using the deposition strategy and
hardware design.Mechanical Engineerin
Effect of Sparse-Build Internal Structure on Performance of Fused Deposition Modeling Tools under Pressure
Two different approaches to design a sparse-build tool for fabrication by the fused deposition modeling (FDM) process are compared. One approach uses a 2D lattice structure and the other approach is inspired by topology optimization. Ultem 9085 is used as the material, and the amount of material used to build the tool is kept constant to ensure a fair comparison. A solid tool is also included in the comparison. The performance of the tool under uniform pressure is simulated using finite element analysis (FEA) and the accuracy of the FEA results is verified by comparing them with experimentally measured data for a similar tool. The build material, support material, build time, maximum displacement, and maximum von Mises stress are compared for the three build approaches, with an emphasis on the pros and cons of each sparsebuild tool with regards to performance under uniform pressure and fabrication by FDM
Recruitment of ethnic minority patients to a cardiac rehabilitation trial: The Birmingham Rehabilitation Uptake Maximisation (BRUM) study [ISRCTN72884263]
Background: Concerns have been raised about low participation rates of people from minority ethnic groups
in clinical trials. However, the evidence is unclear as many studies do not report the ethnicity of participants and
there is insufficient information about the reasons for ineligibility by ethnic group. Where there are data, there
remains the key question as to whether ethnic minorities more likely to be ineligible (e.g. due to language) or
decline to participate. We have addressed these questions in relation to the Birmingham Rehabilitation Uptake
Maximisation (BRUM) study, a randomized controlled trial (RCT) comparing a home-based with a hospital-based
cardiac rehabilitation programme in a multi-ethnic population in the UK.
Methods: Analysis of the ethnicity, age and sex of presenting and recruited subjects for a trial of cardiac
rehabilitation in the West-Midlands, UK.
Participants: 1997 patients presenting post-myocardial infarction, percutaneous transluminal coronary angioplasty
or coronary artery bypass graft surgery.
Data collected: exclusion rates, reasons for exclusion and reasons for declining to participate in the trial by ethnic
group.
Results: Significantly more patients of South Asian ethnicity were excluded (52% of 'South Asian' v 36% 'White
European' and 36% 'Other', p < 0.001). This difference in eligibility was primarily due to exclusion on the basis of
language (i.e. the inability to speak English or Punjabi). Of those eligible, similar proportions were recruited from
the different ethnic groups (white, South Asian and other). There was a marked difference in eligibility between
people of Indian, Pakistani or Bangladeshi origin
Numerical Confirmation of Late-time t^{1/2} Growth in Three-dimensional Phase Ordering
Results for the late-time regime of phase ordering in three dimensions are
reported, based on numerical integration of the time-dependent Ginzburg-Landau
equation with nonconserved order parameter at zero temperature. For very large
systems () at late times, the characteristic length grows
as a power law, , with the measured in agreement with the
theoretically expected result to within statistical errors. In this
time regime is found to be in excellent agreement with the analytical
result of Ohta, Jasnow, and Kawasaki [Phys. Rev. Lett. {\bf 49}, 1223 (1982)].
At early times, good agreement is found between the simulations and the
linearized theory with corrections due to the lattice anisotropy.Comment: Substantially revised and enlarged, submitted to PR
Hunt for Planet Nine: Atmosphere, Spectra, Evolution, and Detectability
We investigate the physical characteristics of the solar system\u27s proposed Planet Nine using modeling tools with a heritage of studying Uranus and Neptune. For a range of plausible masses and interior structures, we find upper limits on the intrinsic , from ~35 to 50 K for masses of 5–20 M ⊕, and we also explore lower values. Possible planetary radii could readily span from 2.7 to 6 R ⊕, depending on the mass fraction of any H/He envelope. Given its cold atmospheric temperatures, the planet encounters significant methane condensation, which dramatically alters the atmosphere away from simple Neptune-like expectations. We find that the atmosphere is strongly depleted in molecular absorption at visible wavelengths, suggesting a Rayleigh scattering atmosphere with a high geometric albedo approaching 0.75. We highlight two diagnostics for the atmosphere\u27s temperature structure: (1) the value of the methane mixing ratio above the methane cloud and (2) the wavelength at which cloud scattering can be seen, which yields the cloud-top pressure. Surface reflection may be seen if the atmosphere is thin. Due to collision-induced opacity of H2 in the infrared, the planet would be extremely blue instead of red in the shortest wavelength WISE colors if methane is depleted and would, in some cases, exist on the verge of detectability by WISE. For a range of models, thermal fluxes from ~3 to 5 μm are ~20 orders of magnitude larger than blackbody expectations. We report a search of the AllWISE Source Catalog for Planet Nine, but find no detection
Speckle from phase ordering systems
The statistical properties of coherent radiation scattered from
phase-ordering materials are studied in detail using large-scale computer
simulations and analytic arguments. Specifically, we consider a two-dimensional
model with a nonconserved, scalar order parameter (Model A), quenched through
an order-disorder transition into the two-phase regime. For such systems it is
well established that the standard scaling hypothesis applies, consequently the
average scattering intensity at wavevector _k and time t' is proportional to a
scaling function which depends only on a rescaled time, t ~ |_k|^2 t'. We find
that the simulated intensities are exponentially distributed, with the
time-dependent average well approximated using a scaling function due to Ohta,
Jasnow, and Kawasaki. Considering fluctuations around the average behavior, we
find that the covariance of the scattering intensity for a single wavevector at
two different times is proportional to a scaling function with natural
variables mt = |t_1 - t_2| and pt = (t_1 + t_2)/2. In the asymptotic large-pt
limit this scaling function depends only on z = mt / pt^(1/2). For small values
of z, the scaling function is quadratic, corresponding to highly persistent
behavior of the intensity fluctuations. We empirically establish a connection
between the intensity covariance and the two-time, two-point correlation
function of the order parameter. This connection allows sensitive testing,
either experimental or numerical, of existing theories for two-time
correlations in systems undergoing order-disorder phase transitions. Comparison
between theory and our numerical results requires no adjustable parameters.Comment: 18 pgs RevTeX, to appear in PR
- …