Improving the efficiency of technological preparation of single and small batch production based on simulation modeling

Technological preparation of production is an integral stage of the production process, which is characterized by high complexity, which is largely felt in the conditions of single and small-scale types of production. The effectiveness of technological preparation of production is increased through automation with the use of simulation modeling. The objective of the study is to develop a simulation model that allows you to determine a rational version of the process for processing a batch of parts. The simulation model described in the article allows to analyze the production schedule of the enterprise, build processing routes, evaluate options for using various types of workpieces and technological equipment, determine the acceptable values of cutting conditions, and choose a rational variant of the technological process of processing a batch of parts. The developed simulation model is based on the principles of modular technologies, the part is considered as a combination of individual elementary surfaces. Each elementary surface contains information about the technological processing route, technological equipment and the type of technological equipment used in its manufacture, cutting conditions and the size of the allowance for each processing stage. The rational choice of the technological process is selected on the basis of multicriteria analysis according to three criteria: the value of variable costs, the production time of a batch of parts and the value of the processing error. The analysis of these criteria is made and the parameters that have the greatest impact on their value are determined. The developed classification of surface elements is described: design elements, technological elements, basic elements, as well as a mathematical model based on which the calculation of the values of the criteria for choosing a rational option

Study Of Technical Cellulose As A Matrix-Sorbent To Develop Express Analytic System For Water Safety Control

The study presented by the authors is devoted to the study of the properties and the possibility of using technical cellulose from non-wood plant raw materials as a solid-phase matrix to obtain solid-phase reactive indicator systems by the following methods: synthesis method on the base of a hetarylformazane immobilized on a cellulose matrix and development of analytical systems based on preconcentration of the determined metal ion by a matrix with subsequent its «revealing» by the formazan («revealing» method). The article focuses on determination of optimal combinations of chromogenic organic reagents (hetarylformazanes) and cellulose-based matrices for developing solid-phase reaction-based indicator systems. Adsorption features of formazan reagents onto cellulose matrices was studied. It has been established the relation between the reagent molecule structure, composition of cellulose matrix and analytical properties of the test-systems synthesized to determine metal ions. Different approaches were developed and applied to reveal the visually observable and easily measured effect due to cellulose properties as well as properties of hetarylformazanes fixed on the surface of the matrix. This fact allows to control sensitivity and selectivity of solid-phase reactive indicator systems for water quality assessment. © 2021 Altai State University. All rights reserved

К проблеме выбора рациональных вариантов диверсификации деятельности транспортной компании

The necessity of using of heuristic methods take account of uncertainties in each of the transport company activities when choosing a rational variant of the vector control of dynamic processes related to performance indicators, built on the basis of poly-criteria evaluation.В статье обосновывается необходимость использования эвристических методов учета неопределенностей в каждом из видов деятельности транспортной компании при выборе рационального варианта вектора управления динамическими процессами с показателями эффективности, построенными на основе поликритериальных оценок

The model and the planning method of volume and variety assessment of innovative products in an industrial enterprise

In the long term, the innovative development strategy efficiency is considered as the most crucial condition for assurance of economic system competitiveness in market conditions. It determines the problem relevance of such justification strategies with regard to specific systems features and conditions of their operation. The problem solution for industrial enterprises can be based on mathematical models of supporting the decision-making on the elements of the innovative manufacturing program. An optimization model and the planning method of innovative products volume and variety are suggested. The feature of the suggested model lies in the nonlinear nature of the objective function. It allows taking into consideration the law of diminishing marginal utility. The suggested method of optimization takes into account the system features and enables the effective implementation of manufacturing capabilities in modern conditions of production organization and sales in terms of market saturation

XPS Study of Ion Irradiated and Unirradiated UO2 Thin Films.

XPS determination of the oxygen coefficient kO = 2 + x and ionic (U(4+), U(5+), and U(6+)) composition of oxides UO2+x formed on the surfaces of differently oriented (hkl) planes of thin UO2 films on LSAT (Al10La3O51Sr14Ta7) and YSZ (yttria-stabilized zirconia) substrates was performed. The U 4f and O 1s core-electron peak intensities as well as the U 5f relative intensity before and after the (129)Xe(23+) and (238)U(31+) irradiations were employed. It was found that the presence of uranium dioxide film in air results in formation of oxide UO2+x on the surface with mean oxygen coefficients kO in the range 2.07-2.11 on LSAT and 2.17-2.23 on YSZ substrates. These oxygen coefficients depend on the substrate and weakly on the crystallographic orientation. On the basis of the spectral parameters it was established that uranium dioxide films AP2,3 on the LSAT substrates have the smallest kO values, and from the XRD and EBSD results it follows that these samples have a regular monocrystalline structure. The XRD and EBSD results indicate that samples AP5-7 on the YSZ substrates have monocrystalline structure; however, they have the highest kO values. The observed difference in the kO values was probably caused by the different nature of the substrates: the YSZ substrates provide 6.4% compressive strain, whereas (001) LSAT substrates result only in 0.03% tensile strain in the UO2 films. (129)Xe(23+) irradiation (92 MeV, 4.8 × 10(15) ions/cm(2)) of uranium dioxide films on the LSAT substrates was shown to destroy both long-range ordering and uranium close environment, which results in an increase of uranium oxidation state and regrouping of oxygen ions in uranium close environment. (238)U(31+) (110 MeV, 5 × 10(10), 5 × 10(11), 5 × 10(12) ions/cm(2)) irradiations of uranium dioxide films on the YSZ substrates were shown to form the lattice damage only with partial destruction of the long-range ordering.The irradiation experiment was performed at the Grand Accelé rateur National d ́ ’Ions Lourds (GANIL) Caen, France, and supported by the French Network EMIR. The support in planning and execution of the experiment by the CIMAPCIRIL and the GANIL staff, especially I. Monnet, C. Grygiel, T. Madi, and F. Durantel, is much appreciated. The work was supported by RFBR grant no. 16-03-00914-a and partially supported by M.V. Lomonosov Moscow State University Program of Development. A.J.P. acknowledges funding from the UK EPSRC (grant EP/I036400/1) and Radioactive Waste Management Ltd. (formerly the Radioactive Waste Management Directorate of the UK Nuclear Decommissioning Authority, contract NPO004411A-EPS02), a maintenance grant from the Russian Foundation for Basic Research (projects 13-03-90916) and CSAR bursary. Thanks are given to A.M. Adamska, G.I. Lampronti, V.A. Lebedev, P.G. Martin, L. Payne, and A.A. Shiryaev for their help in characterization of the samples

Реконструкция среднеянварской температуры воздуха в раннем голоцене на восточном побережье Чукотки

The investigation is concerned with the Early Holocene syngenetic massive wedge ice exposed in the outcrop of a polygonal peatland in the upper part of the third marine terrace near Lorino settlement on the eastern coast of Chukotka. Based on the obtained radiocarbon dates of peat, it was found that the formation of a peatland in the area began about 14–13 cal ka BP, at the end of the Younger Dryas, while the termination of the active stage of peat accumulation was dated to about 10–9 cal ka BP. The beginning of peat accumulation at the end of the Younger Dryas, earlier the officially accepted limit of the lower boundary of the Holocene (11.7 cal ka BP), and the termination of its formation by the middle of the Greenlandian Holocene period is not a rare phenomenon in Russian permafrost zone, although it is traditionally assumed that the most active formation of peatlands has been going on during the thermal maximum in the middle of the Holocene. The age inversions noted in the peat vertical profiles are the most likely indicative of the processes of re-deposition of ancient organic material due to erosion by water of the third marine terrace sediments and the separation of the allochthonous peat. During the period from 2015 to 2021, six fragments of peatland exposures with the ice wedges were studied. Analysis of the obtained data on the content of stable oxygen isotopes in the ice show that δ18О values vary within the range from –15.5 to –18‰. These values are in good agreement with the data for Early Holocene ice wedges earlier obtained in other areas of the eastern coast of Chukotka (Anadyr town, Uelen settlement), where authors report the δ18O values from –16 to –19.4‰. This suggests that the ice wedge growth as well as the peat accumulation were the most active in Early Holocene. The highest δ18О values (from –13.1 to –16.8‰) were obtained for the modern ice veinlets. The ratio δ2 H–δ18O in the ice wedges, in general, is indicative of a good preservation of isotope signature of winter precipitation. It has been found that approximate mean January air temperature in the Early Greenlandian period varied from –23 to –27°С, which is, on average, 3°С below than the present-day ones.Формирование полигонального торфяника на поверхности третьей морской террасы в районе села Лорино на восточном побережье Чукотки началось в конце позднего дриаса и завершилось в начале голоцена. Среднеянварская температура воздуха в первой половине гренландского периода голоцена, реконструированная на основе данных изотопного состава повторно-жильных льдов, возраст которых не моложе 10–9 тыс. кал. лет назад, в среднем на 3°С ниже современной и варьировала от –23 до –27°С

Formazan-Containing Solid-Phase Reagent Indicator Systems for Environmental Analysis

Research results on synthesis and application of solid-phase reagents containing formazan groups were considered. The influence of the composition and structure of immobilized organic ligands on the sorption and analytical properties of the test-tools obtained were discussed. Data on the chromogenic properties of formazan-containing analytical systems suitable for rapid testing of toxic elements in environmental samples were presented. © 2018, Pleiades Publishing, Ltd

Nanodiamond seeding for nucleation and growth of CVD diamond films

Detonation nanodiamonds are shown to be effective seeds for growth of CVD diamond films as they provide high nucleation density on a substrate and can be placed on complex shape surfaces, for example into porous materials. XPS, AES and TEM analysis give useful information on the early stage of diamond growth. The transfer molding technique for manufacturing of various diamond shapes is described. As the nucleation side of free-standing films produced by the molding is the \u201cworking\u201d surface, a special attention is paid to study its properties, such as topography, impurity contamination, thermal conductivity, wettability. Examples of diamond articles grown directly on patterned Si templates are given