Impact of pig slurry amendments on phosphorus, suspended sediment and metal losses in laboratory runoff boxes under simulated rainfall

peer-reviewedLosses of phosphorus (P) when pig slurry applications to land are followed by a rainfall event or losses from soils with high P contents can contribute to eutrophication of receiving waters. The addition of amendments to pig slurry spread on high P Index soils may reduce P and suspended sediment (SS) losses. This hypothesis was tested at laboratory-scale using runoff boxes under simulated rainfall conditions. Intact grassed soil samples, 100 cm-long, 22.5 cm-wide and 5 cm-deep, were placed in runoff boxes and pig slurry or amended pig slurry was applied to the soil surface. The amendments examined were: (1) commercial grade liquid alum (8% Al2O3) applied at a rate of 0.88:1 [Al:total phosphorus (TP)] (2) commercial-grade liquid ferric chloride (38% FeCl3) applied at a rate of 0.89:1 [Fe:TP] and (3) commercial-grade liquid poly-aluminium chloride (PAC) (10% Al2O3) applied at a rate of 0.72:1 [Al:TP]. The grassed soil was then subjected to three rainfall events (10.3 ± 0.15 mm h−1) at time intervals of 48, 72, and 96 h following slurry application. Each sod received rainfall on 3 occasions. Results across three rainfall events showed that for the control treatment, the average flow weighted mean concentration (FWMC) of TP was 0.61 mg L−1, of which 31% was particulate phosphorus (PP), and the average FWMC of SS was 38.1 mg L−1. For the slurry treatment, there was an average FWMC of 2.2 mg TP L−1, 47% of which was PP, and the average FWMC of SS was 71.5 mg L−1. Ranked in order of effectiveness from best to worst, PAC reduced the average FWMC of TP to 0.64 mg L−1 (42% PP), FeCl3 reduced TP to 0.91 mg L−1 (52% PP) and alum reduced TP to 1.08 mg L−1 (56% PP). The amendments were in the same order when ranked for effectiveness at reducing SS: PAC (74%), FeCl3 (66%) and alum (39%). Total phosphorus levels in runoff plots receiving amended slurry remained above those from soil only, indicating that, although incidental losses could be mitigated by chemical amendment, chronic losses from the high P index soil in the current study could not be reduced.The first author gratefully acknowledges the award of the EMBARK scholarship from IRCSET to support this study

The triggered behavior of a controlled corona stabilised cascade switch

Corona stabilised switches have been shown to have advantages in pulse power switching applications due to their high repetition rates and low jitter. Work performed in recent years by the High Voltage Technologies Group within the Department of Electronic and Electrical Engineering at the University of Strathclyde has shown that the operating voltage range of such switches can be extended by using a multi-gap cascade configuration. One particular multi-gap topology was shown to operate under pressure at 100 kV with a switching jitter of 2ns. It has since been shown that by modifying the topology of the corona sources on the electrodes, it is possible to control the grading of the voltage distribution across the gaps in the cascade. The voltages across each gap and the self-break behaviour of the cascade were found to be in close agreement with the values predicted from the corona emission characteristics for the tested electrode topologies. This paper reports on a further examination of the behaviour of the corona controlled switching topology, where triggered operation of the switch has been investigated for different voltage distributions across the cascade gaps

Gravitational waves from the sound of a first order phase transition

We report on the first three-dimensional numerical simulations of first-order phase transitions in the early Universe to include the cosmic fluid as well as the scalar field order parameter. We calculate the gravitational wave (GW) spectrum resulting from the nucleation, expansion, and collision of bubbles of the low-temperature phase, for phase transition strengths and bubble wall velocities covering many cases of interest. We find that the compression waves in the fluid continue to be a source of GWs long after the bubbles have merged, a new effect not taken properly into account in previous modeling of the GW source. For a wide range of models, the main source of the GWs produced by a phase transition is, therefore, the sound the bubbles make

Psychometric Evaluation of an Instrument to Measure Prospective Pregnancy Preferences: The Desire to Avoid Pregnancy Scale.

BACKGROUND:Existing approaches to measuring women's pregnancy intentions suffer important limitations, including retrospective assessment, overly simple categories, and a presumption that all women plan pregnancies. No psychometrically valid scales exist to prospectively measure the ranges of women's pregnancy preferences. MATERIALS AND METHODS:Using a rigorous construct modeling approach, we developed a scale to measure desire to avoid pregnancy. We developed 60 draft items from existing research, assessed comprehension through 25 cognitive interviews, and administered items in surveys with 594 nonpregnant women in 7 primary and reproductive health care facilities in Arizona, New Jersey, New Mexico, South Carolina, and Texas in 2016-2017. We used item response theory to reduce the item set and assess the scale's reliability, internal structure validity, and external validity. Items were included based on fit to a random effects multinomial logistic regression model (partial credit item response model), correspondence of item difficulty with participants' pregnancy preference levels, and consistency of each item's response options with overall scale scores. RESULTS:The 14 final items covered 3 conceptual domains: cognitive preferences, affective feelings, and practical consequences. Items fit the unidimensional model, with a separation reliability of 0.90 (Cronbach α: 0.95). The scale met established criteria for internal validity, including correspondence between each item's response categories and overall scale scores. We found no important differential item functioning by participant characteristics. CONCLUSIONS:A robust measure is available to prospectively measure desire to avoid pregnancy. The measure can aid in identifying women who could benefit from contraceptive care and research on less desired pregnancy

The Practitioner\u27s Corner: An exploration of municipal active living charter development and advocacy

Background: Numerous municipal active living-­‐related charters have been adopted to promote physical activity in Canada throughout the past decade. Despite this trend, there are few published critical examinations of the process through which charters are developed and used. Purpose: Thus, the purpose of this study was to establish greater understanding of active living charter development and advocacy. Methods: Semi-­‐structured interviews were conducted with eight primary contributors to different active living-­‐related charters across Ontario, Canada. Interview questions explored participants’ experiences developing and advocating for an active living charter. Interviews were analyzed using open, axial, and selective coding. Results and Conclusions: Participants consistently described a process whereby an impetus triggered the development of a charter, which was subsequently adopted by regional or municipal council. Continued advocacy to develop awareness of the charter and to promote desired outcomes in the community was valued and the capacity of the working group as well as the local political context played pivotal roles in determining how the charter was implemented. Outcomes were, however, only objectively evaluated in one case that was described – evaluation being a process that many participants thought was omitted in regard to their own charter. This work provides practical guidance for health professionals developing regional active living charters as a component of broader advocacy efforts

Allosteric modulation of beta1 integrin function induces lung repair in animal model of emphysema.

Emphysema is a progressive lung disease characterised by loss of lung parenchyma with associated functional changes including decreased tissue elastance. Here we report beta1 integrin is a novel target for tissue repair and regeneration in emphysema. We show a single dose of a monoclonal antibody against beta1 integrin induced both functional and structural reversal of elastase-induced lung injury in vivo, and we found that similar matrix remodelling changes occurred in human lung tissue. We also identified a potential mechanism of action as this allosteric modulation of beta1 integrin inhibited elastase-induced caspase activation, F-actin aggregate formation and changes in cellular ATP levels. This was accompanied by maintenance of beta1?integrin levels and inhibition of caveolin-1 phosphorylation. We propose that allosteric modulation of beta1 integrin-mediated mechanosensing prevents cell death associated with lung injury and progressive emphysema, thus allowing cells to survive and for repair and regeneration to ensue

Role of Peptide Backbone Conformation on Biological Activity of Chemotactic Peptides

To investigate the role of peptide backbone conformation on the biological activity of chemotactic peptides, we synthesized a unique analog of N-formyl-Met-Leu-Phe-OH incorporating the C α,α disubstituted residue, dipropylglycine (Dpg) in place of Leu. The conformation of the stereochemically constrained Dpg analog was examined in the crystalline state by x-ray diffraction and in solution using NMR, IR, and CD methods. The secretagogue activity of the peptide on human neutrophils was determined and compared with that of a stereochemically constrained, folded type II β-turn analog incorporating 1-aminocyclohexanecarboxylic acid (Ac6c) at position 2 (f-Met- Ac6c -Phe-OMe), the parent peptide (f-Met-Leu-Phe-OH) and its methyl ester derivative (f-Met-Leu-Phe-OMe). In the solid state, the Dpg analog adopts an extended β-sheet-like structure with an intramolecular hydrogen bond between the NH and CO groups of the Dpg residue, thereby forming a fully extended (C5) conformation at position 2. The ϕ and ψ values for Met and Phe residues are significantly lower than the values expected for an ideal antiparallel beta conformation causing a twist in the extended backbone both at the N and C termini. Nuclear magnetic resonance studies suggest the presence of a significant population of the peptide molecules in an extended antiparallel β conformation and the involvement of Dpg NH in a C5 intramolecular hydrogen bond in solutions of deuterated chloroform and deuterated dimethyl sulfoxide. IR studies provide evidence for the presence of an intramolecular hydrogen bond in the molecule and the antiparallel extended conformation in chloroform solution. CD spectra in methanol, trifluoroethanol, and trimethyl phosphate indicate that the Dpg peptide shows slight conformational flexibility, whereas the folded Ac6c analog is quite rigid. The extended Dpg peptide consistently shows the highest activity in human peripheral blood neutrophils, being approximately 8 and 16 times more active than the parent peptide and the folded Ac6c analog, respectively. However, the finding that all four peptides have ED50 (the molar concentration of peptide to induce half-maximal enzyme release) values in the 10(-8)-10(-9) M range suggests that an induced fit mechanism may indeed be important in this ligand-receptor interaction. Moreover, it is also possible that alterations in the backbone conformation at the tripeptide level may not significantly alter the side chain topography and/or the accessibility of key functional groups important for interaction with the receptor

Quantifying uncertainty in pest risk maps and assessments : adopting a risk-averse decision maker’s perspective

Pest risk maps are important decision support tools when devising strategies to minimize introductions of invasive organisms and mitigate their impacts. When possible management responses to an invader include costly or socially sensitive activities, decision-makers tend to follow a more certain (i.e., risk-averse) course of action. We presented a new mapping technique that assesses pest invasion risk from the perspective of a risk-averse decision maker. We demonstrated the method by evaluating the likelihood that an invasive forest pest will be transported to one of the U.S. states or Canadian provinces in infested firewood by visitors to U.S. federal campgrounds. We tested the impact of the risk aversion assumption using distributions of plausible pest arrival scenarios generated with a geographically explicit model developed from data documenting camper travel across the study area. Next, we prioritized regions of high and low pest arrival risk via application of two stochastic ordering techniques that employed, respectively, first- and second-degree stochastic dominance rules, the latter of which incorporated the notion of risk aversion. We then identified regions in the study area where the pest risk value changed considerably after incorporating risk aversion. While both methods identified similar areas of highest and lowest risk, they differed in how they demarcated moderate-risk areas. In general, the second-order stochastic dominance method assigned lower risk rankings to moderate-risk areas. Overall, this new method offers a better strategy to deal with the uncertainty typically associated with risk assessments and provides a tractable way to incorporate decisionmaking preferences into final risk estimates, and thus helps to better align these estimates with particular decision-making scenarios about a pest organism of concern. Incorporation of risk aversion also helps prioritize the set of locations to target for inspections and outreach activities, which can be costly. Our results are especially important and useful given the huge number of camping trips that occur each year in the United States and Canada