3,818 research outputs found
An equivalent fluid/equivalent medium approach for the numerical simulation of coastal landslides propagation: theory and case studies
Coastal and subaqueous landslides can be very dangerous phenomena since they are characterised by the additional risk of induced tsunamis, unlike their completely-subaerial counterparts. Numerical modelling of landslides propagation is a key step in forecasting the consequences of landslides. In this paper, a novel approach named Equivalent Fluid/Equivalent Medium (EFEM) has been developed. It adapts common numerical models and software that were originally designed for subaerial landslides in order to simulate the propagation of combined subaerial-subaqueous and completely-subaqueous landslides. Drag and buoyancy forces, the loss of energy at the landslide-water impact and peculiar mechanisms like hydroplaning can be suitably simulated by this approach; furthermore, the change in properties of the landslide's mass, which is encountered at the transition from the subaerial to the submerged environment, can be taken into account. The approach has been tested by modelling two documented coastal landslides (a debris flow and a rock slide at Lake Albano) using the DAN-W code. The results, which were achieved from the back-analyses, demonstrate the efficacy of the approach to simulate the propagation of different types of coastal landslides
Integrating geomechanical surveys and remote sensing for sea cliff slope stability analysis: the Mt. Pucci case study (Italy)
Abstract. An integrated approach to the geomechanical characterization of coastal sea cliffs was applied at Mt. Pucci (Gargano promontory, Southern Italy) by performing field-based geomechanical investigations and remote geostructural investigations via a terrestrial laser scanner (TLS). The consistency of the integrated techniques allowed to achieve a comprehensive and affordable characterization of the main joint sets on the sea cliff slope. The observed joint sets were considered to evaluate the proneness of the slope to rock failures by attributing safety factor (SF) values to the topple- and wedge-prone rock blocks under three combined or independent triggering conditions: (a) hydrostatic water pressures within the joints, (b) seismic action, and (c) strength reduction due to weathering of the joint surfaces. The combined action of weathering and water pressures within the joints was also considered, resulting in a significant decrease in the stability. Furthermore, remote survey analyses via InfraRed Thermography (IRT) and Ground Based Synthetic Aperture Radar Interferometry (GBInSAR) were performed to evaluate the role of the surveyed joint sets in inducing instabilities in the Mt. Pucci sea cliff. The results from the remote surveys: (i) GBInSAR monitoring revealed permanent displacements coupled to cyclic daily displacements, these last ones detected in certain sectors of the cliff wall; (ii) the thermal images allowed us to identify anomalies that correspond well to the main joints and to the slope material released due to recent collapses
Equilibrium moisture content of clay bricks: The influence of the porous structure
The comprehension of the influence exerted by the material microstructure on the hygrometric properties of clay bricks plays a fundamental role in order to control the condensation phenomena and to avoid the deterioration of the masonry structure. The equilibrium moisture content (MEq) of ordinary and lightweight clay bricks was measured and the correlation with microstructure and pore morphology was investigated. The influence of the pore size and specific surface on the amount of MEq was found to be prevalent when compared to the other physical variables. A statistical model was also set up in order to predict the MEq values
Experimental Investigation of the Effect of Transient Overvoltages on XLPE-insulated HVDC Cables
HVDC cables are subject to several types of impulses superimposed on the rated DC voltage during their service lifetime. Temporary Overvoltages (TOVs) and Superimposed Switching impulses (SSIs) are considered some of the most challenging due to the relatively long impulse duration. This paper aims at investigating experimentally the effect of TOVs and SSIs on XLPE insulation for extruded HVDC cables. 0.15-mm-thick DC-XLPE specimens, aged by applying TOVs and SSIs, are characterized using dielectric analyzer and Fourier Transform InfraRed spectroscopy (FTIR) to detect the aging effects on the insulation. Results show an increase in the imaginary part of permittivity, ε", accompanied with the appearance of additional dipolar polarization losses peaks. The amplitude and frequency of the aforementioned peaks vary with the amplitude and the number of applied TOVs and SSIs. An increase in electrical conductivity is also noticed with aging. FTIR results show absorbance peaks in the aged specimens likely due to the intramolecular bonds rupture accompanied with the formation of aging products. In summary, SSIs and TOVs cause a noticeable reduction of insulating properties in XLPE specimens. The higher the peak of the transient, the greater the aging effect
HIGH BAY CAPACITY UTILIZATION TOOL
Northrop Grumman’s Space Park facility has many inefficiencies in their high bay scheduling processes. Additionally, it is very hard for project managers to figure out the capabilities of each high bay in order to schedule their specific project. The purpose of this project is to develop a tool that can be used across the facility to easily create projects, assign projects, view room capabilities, and view a master schedule of the rooms. After researching commercially available tools, our approach to designing this system was to use tools that are already utilized at the facility (Microsoft Suite and Tableau) and engineer the system to do exactly what we need it to do for this facility. The design is a relational database managed in Microsoft Access that links to Tableau for a detailed schedule for all the rooms along with facility layouts on Microsoft Visio to show each facility at any time. These three programs are tied together with a user interface in Microsoft Access and available across the entire network at the Space Park facility via SharePoint. While our system would have higher initial cost to train employees on, it would save significant operating costs each year. If this system were to be installed and utilized into Northrop Grumman’s current operations, we estimate a cost savings between 25,000 over a ten year period. However, we ran into problems with the implementation of our tool due to having to use assumed data for our project. Although it is possible to expand this system, it is a lengthy process to add parameters for rooms and change the base layout of our design. Our largest recommendation for this system is that Northrop Grumman uses the base layout of our system (including the relational database design, user interface, and data visualization) to create a new system that has actual parameters of the room. This will yield the same results as installing the system that we have developed
Thermal conductivity of clay bricks
In the present work the thermal conductivity of 29 samples of clay bricks was measured and the correlations of the thermal performance with the compositional, physical, and microstructural features of products were investigated. The results obtained directed our attention toward a better understanding of the role played by some parameters (i.e., mineralogical components and pore size distribution), other than bulk density, in improving or depressing the insulating properties of bricks. Among them, the unfavorable role of quartz, Ca-rich silicates, and amorphous phase came out, while the role of pore size and specific surface should be more accurately evaluated in the structural design of materials
Urban engineered slope collapsed in Rome on February 14th, 2018. Results from remote sensing monitoring
On February 14th, 2018, in the North-Western sector of the Municipality of Rome (Central Italy), in the framework of an excavation for building construction, a portion of a piling wall piling wall collapsed in an already densely urbanized area. Soil behind the collapsed piling wall slipped inside the excavation site dragging seven cars parked on one side of the road running parallel to the piling wall and affecting some residential buildings located on the opposite side of the road. Fortunately, no injuries were counted but the 22 families living in the buildings next to the damaged wall were evacuated. Following the piling wall collapse, the Civil Protection of Rome, thanks to the technical support of the Research Centre on Geological Risks (CERI) of the Sapienza University of Rome, started a continuous monitoring of the affected area through remote sensing techniques. In the first hours following the collapse, a Terrestrial Synthetic Aperture Radar Interferometer (TInSAR) and a terrestrial laser scanner (TLS) were installed with the aim to control the evolution of the process, to support the local authority to manage the associated residual risk, and to ensure the safety of workers during emergency operations. In this paper we discuss some of the results obtained by the monitoring of the involved area. Thanks to the comparisons between different surveys and the reconstruction of the pre-event geometries, the total volume involved in the failure was estimated around 850 m3. In addition, through the analysis of data acquired by the 18 multi-temporal TLS scans and the three and a half months of continuous TInSAR monitoring, the movement involving a portion of the filling material used for stabilization works was observed and described. Such movement, reaching a total displacement of about 270–300 mm, was monitored and reported in real time
Remote sensing monitoring of the Pietrafitta earth flows in Southern Italy. An integrated approach based on multi-sensor data
Earth flows are complex gravitational events characterised by a heterogeneous displacement pattern in terms of scale, style, and orientation. As a result, their monitoring, for both knowledge and emergency purposes, represents a relevant challenge in the field of engineering geology. This paper aims to assess the capabilities, peculiarities, and limitations of different remote sensing monitoring techniques through their application to the Pietrafitta earth flow (Southern Italy). The research compared and combined data collected during the main landslide reactivations by different ground-based remote sensors such as Robotic Total Station (R-TS), Terrestrial Synthetic Aperture Radar Interferometry (T-InSAR), and Terrestrial Laser Scanner (TLS), with data being derived by satellite-based Digital Image Correlation (DIC) analysis. The comparison between R-TS and T-InSAR measurements showed that, despite their different spatial and temporal resolutions, the observed deformation trends remain approximately coherent. On the other hand, DIC analysis was able to detect a kinematic process, such as the expansion of the landslide channel, which was not detected by the other techniques used. The results suggest that, when faced with complex events, the use of a single monitoring technique may not be enough to fully observe and understand the processes taking place. Therefore, the limitations of each different technique alone can be solved by a multi-sensor monitoring approach
A-DInSAR performance for updating landslide inventory in mountain areas. An example from Lombardy region (Italy)
This work focuses on the capabilities and limitations of the Advanced Satellite SAR (Synthetic Aperture Radar) Interferometry (A-DInSAR) in wooded and mountainous regions, with the aim to get insights on the performances for studying slow-moving landslides. The considered critical issues are related to the SAR acquisition geometries (angle of incidence of the satellite line of sight, ascending and descending geometries) and to the physical and morphological features of the slopes (land use, aspect and slope angles), which influence the measuring points coverage. 26 areas in Lombardy Region (Italy), affected by known slope instability phenomena, have been analyzed through A-DInSAR technique, using COSMO-SkyMed images. The results allowed to outline general considerations about the effectiveness of A-DInSAR analysis of a single dataset (descending or ascending dataset), selected accordingly to the aspect of the slopes. Moreover, we aimed to quantitatively describe the capability to update the state of activity of several previously mapped landslides using satellite SAR Interferometry results. Although in a wooded and mountainous region, where the chances of retrieving radar targets for satellite SAR analysis are generally low, the A-DInSAR results have allowed to detect landslides’ reactivations or new landslides and to update the inventory for about 70% of the investigated areas
- …