900 research outputs found

    Proton acceleration in analytic reconnecting current sheets

    Get PDF
    Particle acceleration provides an important signature for the magnetic collapse that accompanies a solar flare. Most particle acceleration studies, however, invoke magnetic and electric field models that are analytically convenient rather than solutions of the governing magnetohydrodynamic equations. In this paper a self-consistent magnetic reconnection solution is employed to investigate proton orbits, energy gains, and acceleration timescales for proton acceleration in solar flares. The magnetic field configuration is derived from the analytic reconnection solution of Craig and Henton. For the physically realistic case in which magnetic pressure of the current sheet is limited at small resistivities, the model contains a single free parameter that specifies the shear of the velocity field. It is shown that in the absence of losses, the field produces particle acceleration spectra characteristic of magnetic X-points. Specifically, the energy distribution approximates a power law ~ξ-3/2 nonrelativistically, but steepens slightly at the higher energies. Using realistic values of the “effective” resistivity, we obtain energies and acceleration times that fall within the range of observational data for proton acceleration in the solar corona

    Charge and matter distributions and form factors of light, medium and heavy neutron-rich nuclei

    Get PDF
    Results of charge form factors calculations for several unstable neutron-rich isotopes of light, medium and heavy nuclei (He, Li, Ni, Kr, Sn) are presented and compared to those of stable isotopes in the same isotopic chain. For the lighter isotopes (He and Li) the proton and neutron densities are obtained within a microscopic large-scale shell-model, while for heavier ones Ni, Kr and Sn the densities are calculated in deformed self-consistent mean-field Skyrme HF+BCS method. We also compare proton densities to matter densities together with their rms radii and diffuseness parameter values. Whenever possible comparison of form factors, densities and rms radii with available experimental data is also performed. Calculations of form factors are carried out both in plane wave Born approximation (PWBA) and in distorted wave Born approximation (DWBA). These form factors are suggested as predictions for the future experiments on the electron-radioactive beam colliders where the effect of the neutron halo or skin on the proton distributions in exotic nuclei is planned to be studied and thereby the various theoretical models of exotic nuclei will be tested.Comment: 26 pages, 11 figures, 3 tables, accepted for publication in Phys. Rev.

    Methodology for determining the parameters of drilling mode for directional straight sections of well using screw downhole motors

    Get PDF
    Article presents results of study on possibility of increasing the efficiency of drilling directional straight sections of wells using screw downhole motors (SDM) with a combined method of drilling with rotation of drilling string (DS). Goal is to ensure steady-state operation of SDM with simultaneous rotation of DS by reducing the amplitude of oscillations with adjusting the parameters of drilling mode on the basis of mathematical modeling for SDM – DS system. Results of experimental study on determination of extrema distribution of lateral and axial oscillations of SDM frame depending on geometrical parameters of gerotor mechanism and modes ensuring stable operation are presented. Approaches to development of a mathematical model and methodology are conceptually outlined that allow determining the range of self-oscillations for SDM – DS system and boundaries of rotational and translational wave perturbations for a heterogeneous rod with an installed SDM at drilling directional straight sections of well. This mathematical model of SDM – DS system's dynamics makes it possible to predict optimal parameters of directional drilling mode that ensure stable operation of borehole assembly

    JUSTIFICATION OF THE TECHNOLOGICAL PARAMETERS CHOICE FOR WELL DRILLING BY ROTARY STEERABLE SYSTEMS

    Get PDF
    Paper presents the analysis of the investigation results of vibrational accelerations and beating amplitudes of the downhole drilling motor, which help to define the ranges of optimum energy characteristics of the gerotor mechanism, ensuring its stable operation. Dependencies describing the operation of the «drilling bit – rotary steerable system with power screw section – drilling string» system and the values of the self-oscillation boundaries and the onset of system resonance when it is used jointly, were defined as a result of computational and full-scale experimental research. A mathematical model is proposed, which allows determining the optimal range of technological parameters for well drilling, reducing the extreme vibration accelerations of the bottomhole assembly by controlling the torque-power and frequency characteristics of the drilling string, taking into account the energy characteristics of the power screw section of the rotary steerable system. Recommendations on the choice of drilling mode parameters were given

    Facilities for the Energy Frontier of Nuclear Physics

    Full text link
    The Relativistic Heavy Ion Collider at BNL has been exploring the energy frontier of nuclear physics since 2001. Its performance, flexibility and continued innovative upgrading can sustain its physics output for years to come. Now, the Large Hadron Collider at CERN is about to extend the frontier energy of laboratory nuclear collisions by more than an order of magnitude. In the coming years, its physics reach will evolve towards still higher energy, luminosity and varying collision species, within performance bounds set by accelerator technology and by nuclear physics itself. Complementary high-energy facilities will include fixed-target collisions at the CERN SPS, the FAIR complex at GSI and possible electron-ion colliders based on CEBAF at JLAB, RHIC at BNL or the LHC at CERN.Comment: Invited talk at the International Nuclear Physics Conference, Vancouver, Canada, 4-9 July 2010, to be published in Journal of Physics: Conference Series. http://inpc2010.triumf.ca

    Пристрій часового і спектрометричного аналізу радіонуклідів

    Get PDF
    Results of the spectrometer and time analysis radioactive nuclide, developed for research of low levels radio-activity, are described.Приведены результаты испытания устройства временного и спектрометрического анализа радионуклидов, для исследования низких уровней радиоактивности.Наведені результати випробовування пристрою часового і спектрометричного аналізу радіонуклідів, розробленого для дослідження низьких рівнів радіоактивності

    Acesso das pequenas empresas russas aos mercados de contratos públicos: análise de dados

    Get PDF
    The aim of this study was to assess the current extent of participation by Russian small enterprises in regional public procurement. We discussed how legislation affects the volume of contracts awarded to small enterprises. We calculated the number of contracts per 100 small enterprises, how much the number and value of such contracts account for in the total number and value of contracts concluded with all suppliers per region, as well as what is the average value of contracts per small enterprise and the average value of one such contract. In order to ensure benchmarking for enterprises located in different regions, such enterprises were assessed on the basis of relative indicators. This study used official statistics accumulated with regard to all public procurement in the regions. The data on the number of contracts and their value for the period from 2010 to 2014 were used. For the purposes of empirical data analysis, the normal distribution probability density functions set for all the indicators in question were used. The findings of this study and the tools used for assessing the extent of participation by small enterprises in public procurement can be used when researching entrepreneurship, as well as to justify the contract system development programs in Russia. Such information is important for entrepreneurs, as it enables them to assess the feasibility and consequences of participation in public procurement.El objetivo de este estudio fue evaluar el grado actual de participación de las pequeñas empresas rusas en la contratación pública regional. Discutimos cómo la legislación afecta el volumen de contratos adjudicados a pequeñas empresas. Calculamos el número de contratos por cada 100 pequeñas empresas, cuánto representan el número y el valor de dichos contratos en el número y el valor total de los contratos celebrados con todos los proveedores por región, así como también cuál es el valor promedio de los contratos por cada pequeña empresa y el valor promedio de uno de esos contratos. Con el fin de garantizar la evaluación comparativa para las empresas ubicadas en diferentes regiones, dichas empresas se evaluaron sobre la base de indicadores relativos. Este estudio utilizó estadísticas oficiales acumuladas con respecto a todas las contrataciones públicas en las regiones. Se utilizaron los datos sobre el número de contratos y su valor para el período de 2010 a 2014. A los efectos del análisis de datos empíricos, se utilizaron las funciones de densidad de probabilidad de distribución normal establecidas para todos los indicadores en cuestión. Las conclusiones de este estudio y las herramientas utilizadas para evaluar el grado de participación de las pequeñas empresas en la contratación pública se pueden utilizar al investigar el espíritu empresarial, así como para justificar los programas de desarrollo de sistemas contractuales en Rusia. Dicha información es importante para los empresarios, ya que les permite evaluar la viabilidad y las consecuencias de la participación en la contratación pública.O objetivo deste estudo foi avaliar o atual grau de participação das pequenas empresas russas nas compras públicas regionais. Discutimos como a legislação afeta o volume de contratos concedidos a pequenas empresas. Nós calculamos o número de contratos por 100 pequenas empresas, que representam o número eo valor desses contratos no número total eo valor total dos contratos com todos os fornecedores por região, bem como o que o valor médio de contratos para cada empresa de pequeno porte e o valor médio de um desses contratos. Para garantir benchmarking para empresas localizadas em diferentes regiões, essas empresas foram avaliadas com base em indicadores relativos. Este estudo utilizou estatísticas oficiais acumuladas em relação a todas as compras públicas nas regiões. Foram utilizados os dados sobre o número de contratos e seu valor para o período de 2010 a 2014. Para fins de análise empírica dos dados, foram utilizadas as funções de densidade de probabilidade de distribuição normal estabelecidas para todos os indicadores em questão. As conclusões deste estudo e os instrumentos utilizados para avaliar o grau de participação das pequenas empresas nos contratos públicos podem ser utilizados na investigação do empreendedorismo, bem como para justificar os programas de desenvolvimento de sistemas contratuais na Rússia. Esta informação é importante para os empresários, pois permite avaliar a viabilidade e as consequências da participação em contratos públicos
    corecore