Understanding the effect of seams on the aerodynamics of an association football

The aerodynamic properties of an association football were measured using a wind tunnel arrangement. A third scale model of a generic football (with seams) was used in addition to a 'mini-football'. As the wind speed was increased, the drag coefficient decreased from 0.5 to 0.2, suggesting a transition from laminar to turbulent behaviour in the boundary layer. For spinning footballs, the Magnus effect was observed and it was found that reverse Magnus effects were possible at low Reynolds numbers. Measurements on spinning smooth spheres found that laminar behaviour led to a high drag coefficient for a large range of Reynolds numbers, and Magnus effects were inconsistent, but generally showed reverse Magnus behaviour at high Reynolds number and spin parameter. Trajectory simulations of free kicks demonstrated that a football that is struck in the centre will follow a near straight trajectory, dipping slightly before reaching the goal, whereas a football that is struck off centre will bend before reaching the goal, but will have a significantly longer flight time. The curving kick simulation was repeated for a smooth ball, which resulted in a longer flight time, due to increased drag, and the ball curving in the opposite direction, due to reverse Magnus effects. The presence of seams was found to encourage turbulent behaviour, resulting in reduced drag and more predictable Magnus behaviour for a conventional football, compared with a smooth ball. © IMechE 2005

Testosterone and aggression

In this chapter we have shown that the role of testosterone in modulation of aggression and related behavior is more complex than the simple cause and effect model originally derived from selective animal studies. A broader evolutionarily-based theory (the “Challenge Hypothesis”) provided the basis for considering research that now dates back over 40 years, ranging from the initial correlational studies, to recent studies that involve sophisticated manipulation of testosterone levels, laboratory procedures rooted in experimental social psychology, and brain imaging. Taken together the emerging evidence shows that competitive behavior influences testosterone levels, which in turn influence aggressive behavior, in a complex way that is moderated by individual differences in personality

Measurement of Finger Pad Forces and Friction using Finger Nail Mounted Strain Gauges

There are currently few techniques for measuring in-vivo the forces exerted by the finger pads when handling objects and friction levels in the interface. Those that exist are intrusive and affect the manner in which an object is gripped or the interface between finger and object. A non-intrusive method would enable data to be gathered on object grip and manipulation that could improve designs to aid usability and inclusivity. The aim of this work was to assess the feasibility of determining finger pad forces and friction between a finger pad and a surface using strain gauges mounted to finger nails. The index finger and thumb were assessed as these have been shown to be used most for gripping in everyday tasks. Initially Digital Image Correlation was used to study strain across whole finger nails during a loading event to establish where it would be best to mount the strain gauges. After attachment of the strain gauges, tests were carried out normally loading finger pads against a force plate to determine strain/force relationships and the effects of slight finger side roll. Sliding tests were then also carried out in dry and lubricated conditions to see how strain varied when normal force was kept constant. Clear relationships have been established between strain and force that could be used to calibrate from measurements taken during actual object manipulation. Changing friction has also been shown to affect strain

In your face: facial metrics predict aggressive behaviour in the laboratory and in varsity and professional hockey players

Facial characteristics are an important basis for judgements about gender, emotion, personality, motivational states and behavioural dispositions. Based on a recent finding of a sexual dimorphism in facial metrics that is independent of body size, we conducted three studies to examine the extent to which individual differences in the facial width-to-height ratio were associated with trait dominance (using a questionnaire) and aggression during a behavioural task and in a naturalistic setting (varsity and professional ice hockey). In study 1, men had a larger facial width-to-height ratio, higher scores of trait dominance, and were more reactively aggressive compared with women. Individual differences in the facial width-to-height ratio predicted reactive aggression in men, but not in women (predicted 15% of variance). In studies 2 (male varsity hockey players) and 3 (male professional hockey players), individual differences in the facial width-to-height ratio were positively related to aggressive behaviour as measured by the number of penalty minutes per game obtained over a season (predicted 29 and 9% of the variance, respectively). Together, these findings suggest that the sexually dimorphic facial width-to-height ratio may be an ‘honest signal’ of propensity for aggressive behaviour

Amorphous silica modeled with truncated and screened Coulomb interactions: A molecular dynamics simulation study

We show that finite-range alternatives to the standard long-range BKS pair potential for silica might be used in molecular dynamics simulations. We study two such models that can be efficiently simulated since no Ewald summation is required. We first consider the Wolf method, where the Coulomb interactions are truncated at a cutoff distance r_c such that the requirement of charge neutrality holds. Various static and dynamic quantities are computed and compared to results from simulations using Ewald summations. We find very good agreement for r_c ~ 10 Angstroms. For lower values of r_c, the long--range structure is affected which is accompanied by a slight acceleration of dynamic properties. In a second approach, the Coulomb interaction is replaced by an effective Yukawa interaction with two new parameters determined by a force fitting procedure. The same trend as for the Wolf method is seen. However, slightly larger cutoffs have to be used in order to obtain the same accuracy with respect to static and dynamic quantities as for the Wolf method.Comment: 10 pages; 11 fig

The influence of surface characteristics on the tribological interactions at the shoe-surface interface in tennis

During dynamic tennis specific movements, such as accelerating and side stepping, the traction provided by a shoe-surface combination plays an important role in the injury risk and performance of the player. Acrylic hard court tennis surfaces have been reported to have increased injury occurrence due to an increased traction coefficient. There is a requirement for an improved scientific understanding of the tribological interactions at the shoe surface interface and the effects footwear and surface parameters have on the friction mechanism developed. Often mechanical test methods used for the testing and categorisation of playing surfaces do not tend to simulate loads occurring during participation on the surface, and thus are unlikely to predict human response to the surface. A new traction testing device, discussed in this paper, has been developed to mechanically measure the traction force between the shoe and the surface under appropriate loading conditions. Acrylic Harcourt tennis surfaces generally have a rough surface topography, due to a sand and acrylic paint mixed top coating, and have a deformable under layer to provide impact attenuation. Surface micro-roughness has been found to influence the friction mechanisms presents during viscoelastic contacts, as found in footwear-surface interactions. This paper aims to further understand the influence of micro-roughness on tennis surfaces. The micro-roughness and traction of a controlled set of acrylic hard court tennis surfaces have been measured. The influence of roughness on tennis surfaces traction is discussed

Radiance cache optimization for global illumination

Radiance caching methods have proven efficient for global illumination. Their goal is to compute precisely illumination values (incident radiance or irradiance) at a reasonable number of points lying on the scene surfaces. These points, called records, are stored in a cache used for estimating illumination of other points in the scene. Unfortunately, with records lying on glossy surfaces, the irradiance value alone is not sufficient to evaluate the reflected radiance; each record should also store the incident radiance for all incident directions. Memory storage can be reduced with projection techniques using spherical harmonics or other basis functions. These techniques provide good results with low shininess BRDFs. However, they get impractical for shininess of even moderate value since the number of projection coefficients increase drastically. In this paper, we propose a new radiance caching method, that handles highly glossy surfaces, while requiring a low memory storage. Each cache record stores a coarse representation of the incident illumination thanks to a new data structure called Equivalent Area light Sources (EAS), capable of handling fuzzy mirror surfaces. In addition, our method proposes a new simplification of the interpolation process since it avoids the need for expressing and evaluating complex gradients

Distributed modeling approach of discrete manufacturing systems by Parts of Plant

International audienceThe paper presents an original approach to model a discrete manufacturing system by Parts of Plant (PoP). This approach takes into account technical and technological specifications of each plant elements. The aim of this works is to realize a reliable simulation of discrete manufacturing systems in design stage before production stage. Models are distributed and established from the functional chain of a process. They take into account the distribution of information through each PoP with its sensors, pre-actuators and actuators. A PoP library is proposed with their corresponding model. An application example is used to illustrate the approach