47,837 research outputs found
Stochastic simulation of the influence of cure kinetics uncertainty on composites cure
A stochastic cure simulation methodology is developed and implemented to investigate the influence of cure kinetics uncertainty due to different initial resin state on the process of cure. The simulation addresses heat transfer effects and allows quantification of uncertainty in temperature overshoot during the cure. Differential Scanning Calorimetry was used to characterise cure kinetics variability of a commercial epoxy resin used in aerospace applications. It was found that cure kinetics uncertainty is associated with variations in the initial degree of cure, activation energy and reaction order. A cure simulation model was coupled with conventional Monte Carlo and an implementation of the Probabilistic Collocation Method. Both simulation schemes are capable of capturing variability propagation, with the collocation method presenting benefits in terms of computational cost against the Monte Carlo scheme with comparable accuracy. Simulation of the cure of a carbon fibre–epoxy panel shows that cure kinetics uncertainty can cause considerable variability in the process outcome with a coefficient of variation in temperature overshoot of about 30%
Stochastic heat transfer simulation of the cure of advanced composites
A stochastic cure simulation approach is developed to investigate the variability of the cure process during resin infusion related to thermal effects. Boundary condition uncertainty is quantified experimentally and appropriate stochastic processes are developed to represent the variability in tool/air temperature and surface heat transfer coefficient. The heat transfer coefficient presents a variation across different experiments of 12.3%, whilst the tool/air temperatures present a standard deviation over 1℃. The boundary condition variability is combined with an existing model of cure kinetics uncertainty and the full stochastic problem is addressed by coupling a cure model with Monte Carlo and the Probabilistic Collocation Method and applied to the case of thin carbon epoxy laminates. The overall variability in cure time reaches a coefficient of variation of about 22%, which is dominated by uncertainty in surface heat transfer and tool temperature; with ambient temperature and kinetics contributing variability in the order of 1%
Uncertainty in the manufacturing of fibrous thermosetting composites: A review
Composites manufacturing involves many sources of uncertainty associated with material properties variation and boundary conditions variability. In this study, experimental and numerical results concerning the statistical characterization and the influence of inputs variability on the main steps of composites manufacturing including process-induced defects are presented and analysed. Each of the steps of composite manufacturing introduces variability to the subsequent processes, creating strong interdependencies between the process parameters and properties of the final part. The development and implementation of stochastic simulation tools is imperative to quantify process output variabilities and develop optimal process designs in composites manufacturing
Stochastic simulation of the influence of fibre path variability on the formation of residual stress and shape distortion
A stochastic cure simulation approach is developed and implemented to investigate the influence of fibre misalignment on cure. Image analysis is used to characterize fiber misalignment in a carbon non-crimp fabric. It is found that variability in tow orientation is significant with a standard deviation of 1.2°. The autocorrelation structure is modeled using the Ornstein-Uhlenbeck sheet and the stochastic problem is addressed by coupling a finite element model of cure with a Monte Carlo scheme. Simulation of the cure of an angle shaped carbon fiber-epoxy component shows that fiber misalignment can cause considerable variability in the process outcome with a coefficient of variation in maximum residual stress up to approximately 2% (standard deviation of 1 MPa) and qualitative and quantitative variations in final distortion of the cured part with the standard deviation in twist and corner angle reaching values of 0.4° and 0.05° respectively. POLYM. COMPOS., 2015. © 2015 The Authors Polymer Composites published by Wiley Periodicals, Inc. on behalf of Society of Plastics Engineer
A simplified holographic-interferometry technique for real-time flow visualization and analysis
A holographic-interferometry technique for flow visualization and analysis that produces real-time moire fringes is described from both experimental and application considerations. It has three chief advantages: real-time data for continuous observation and photography, ease of optical adjustment, and capability of using ordinary-glass test-section windows without affecting the results. A theoretical discussion is presented describing the formation of the fringes in holographic terms and then comparing this result to that which is obtained from a conventional moire approach. A discussion on obtaining density information from the fringe pattern is also included
Exploring the impact and effectiveness of the Wirral Health Services in Schools (HSIS) programme
Direct frequency comb laser cooling and trapping
Continuous wave (CW) lasers are the enabling technology for producing
ultracold atoms and molecules through laser cooling and trapping. The resulting
pristine samples of slow moving particles are the de facto starting point for
both fundamental and applied science when a highly-controlled quantum system is
required. Laser cooled atoms have recently led to major advances in quantum
information, the search to understand dark energy, quantum chemistry, and
quantum sensors. However, CW laser technology currently limits laser cooling
and trapping to special types of elements that do not include highly abundant
and chemically relevant atoms such as hydrogen, carbon, oxygen, and nitrogen.
Here, we demonstrate that Doppler cooling and trapping by optical frequency
combs may provide a route to trapped, ultracold atoms whose spectra are not
amenable to CW lasers. We laser cool a gas of atoms by driving a two-photon
transition with an optical frequency comb, an efficient process to which every
comb tooth coherently contributes. We extend this technique to create a
magneto-optical trap (MOT), an electromagnetic beaker for accumulating the
laser-cooled atoms for further study. Our results suggest that the efficient
frequency conversion offered by optical frequency combs could provide a key
ingredient for producing trapped, ultracold samples of nature's most abundant
building blocks, as well as antihydrogen. As such, the techniques demonstrated
here may enable advances in fields as disparate as molecular biology and the
search for physics beyond the standard model.Comment: 10 pages, 5 figure
Dual frequency receiver system for Mariner 1967 to Venus Final engineering report
Dual frequency receiver system for inclusion in Mariner 1967 spacecraft payload for use in measuring Venusian ionosphere and atmosphere by radio occultatio
Post-operative cranial pressure monitoring system
System for monitoring of fluidic pressures in cranial cavity uses a miniaturized pressure sensing transducer, combined with suitable amplification means, a meter with scale calibrated in terms of pressures between minus 100 and plus 900 millimeters of water, and a miniaturized chart recorder covering similar range of pressures
Self-interacting dark matter and Higgs bosons in the SU(3)_C x SU(3)_L x U(1)_N model with right-handed neutrinos
We investigate the possibility that dark matter could be made from CP-even
and CP- odd Higgs bosons in the SU(3)_C X SU(3)_L X U(1)_N (3-3-1) model with
right-handed neutrinos. This self-interacting dark matters are stable without
imposing of new symmetry and should be weak-interacting.Comment: 7 pages, Latex, To appear in Europhys. Let
- …