85 research outputs found
Beam dynamics in the CEBAF superconducting cavities
This work is a study of beam dynamics in the CEBAF superconducting cavities under the influence of the fields generated by externally applied RF and beam particles.;A full 3-D modeling of the CEBAF 5-cell superconducting cavity is carried out. Details of the modeling with MAFIA are discussed. Multipole fields due to the asymmetric couplers are studied by means of 3-D Fourier transforms. The cavity steering and focusing of the multipole fields are studied. Experimental measurements of these effects are performed to validate the modeling. Evaluation of the cavity misalignment is discussed. The emittance degradation effects in the CEBAF superconducting linacs and an FEL driver linac due to the head-tail effects of the cavity steering and the {dollar}x - y{dollar} coupling effects of the multipole fields are studied.;The beam-cavity interactions for cases of {dollar}v\sb{lcub}s{rcub}, v\sb{lcub}t{rcub} \not= c{dollar} are studied. The Lindman boundary condition is implemented to accommodate simulation of infinite long beam pipes of the beam line. A fourth-order finite-difference algorithm is derived in cylindrical coordinates to reduce the frequency dependent truncation errors, which were discovered in the process of calculating wake fields of very short bunches, of the second-order Yee algorithm. The effects of the slippage between the source particle and the test particle are considered in the wake function calculations. Radial scaling relations are obtained for calculating the wake functions on the axis from the integrated value at the beam pipe radius. The scaling found not only depends on the beam energy but also depends on the bunch length of the beam and the opening of the cavity. The conditions for the validity of the ultrarelativistic treatment of the wakefield are discussed.;The emittance growth and the energy spread due to the combined effects of the cavity multipole fields and the wakefields in a 40 MeV IR FEL driver linac are studied
RF Modeling Using Parallel Codes ACE3P for the 400-MHz Parallel-Bar/Ridged-Waveguide Compact Crab Cavity for the LHC HiLumi Upgrade
Schemes utilizing crab cavities to achieve head-on beam-beam collisions were proposed for the LHC HiLumi upgrade. These crabbing schemes require that the crab cavities be compact in order to fit into the tight spacing available in the existing LHC beamlines at the location where the crab cavities will be installed. Under the support of US LARP program, Old Dominion University and SLAC have joint efforts to develop a 400-MHz compact superconducting crab cavity to meet the HiLumi upgrade requirements. In this paper, we will present the RF modeling and analysis of a parallel-bar/ridged-waveguide shaped 400-MHz compact cavity design that can be used for both the horizontal and vertical crabbing schemes. We will also present schemes for HOM damping and multipacting analysis for such a design
FPC and Hi-Pass Filter HOM Coupler Design for the RF Dipole Crab Cavity for the LHC HiLumi Upgrade
A 400-MHz compact RF dipole (RFD) crab cavity design was jointly developed by Old Dominion University and SLAC under the support of US LARP program for the LHC HiLumi upgrade. The RFD cavity design is consisted of a rounded-square tank and two ridged deflecting poles, operating with a TE11-like dipole mode, which is the lowest mode of the cavity. A prototype RFD cavity is being manufactured and will be tested on the SPS beam line at CERN. The coaxial fundamental Power Coupler (FPC) of the prototype cavity was re-optimized to minimizing the power heating on the coupler internal antenna. A hi-pass filter HOM damping coupler was developed to achieve the required wakefield damping while maintaining a compact size to fit into the beam line space. In this paper, we will discuss the details of the RF optimization and tolerance analyses of the FPC and HOM couplers
High-resolution characterization of the coagulation and drying processes of whole blood based on optical coherence tomography
Introduction: Escaping whole blood exhibits biochemical and physical coupled mechanisms such as coagulation and drying. However, there is no method for simultaneously monitoring the coagulation and drying procedure.Methods: In this study, a new method based on optical coherence tomography (OCT) combined with speckle variance and thickness is presented for simultaneously capturing spatially high-resolved characteristics of coagulation and drying of whole blood during the procedure. Deep learning based on a convolutional neural network (CNN) is employed for collecting OCT images with a resolution of micron order and quantitatively obtaining pixel-wise information of whole blood.Results and discussion: Then, the pixel-wise thickness map provides high-resolved temporal–spatial dynamics of whole blood during the drying procedure, and the corresponding speckle variance can uncover information of whole blood coagulation. The results demonstrate that coagulation and drying of whole blood have spatially inhomogeneous features. This method could provide the potential for revealing the coupling mechanism between coagulation and drying
Design, prototyping and testing of a compact superconducting double quarter wave crab cavity
A novel design of superconducting Crab Cavity was proposed and designed at
Brookhaven National Laboratory. The new cavity shape is a Double Quarter Wave
or DQWCC. After fabrication and surface treatments, the niobium
proof-of-principle cavity was cryogenically tested in a vertical cryostat. The
cavity is extremely compact yet has a low frequency of 400 MHz, an essential
property for service for the Large Hadron Collider luminosity upgrade. The
electromagnetic properties of the cavity are also well matched for this
demanding task. The demonstrated deflecting voltage of 4.6 MV is well above the
requirement for a crab cavity in the future High Luminosity LHC of 3.34 MV. In
this paper we present the design, prototyping and test results of the DQWCC.Comment: to be published in Phys. Rev. ST Accel. Beam
Recommended from our members
X-Band Photo injector Beam Dynamics
SLAC is studying the feasibility of using an X-band RF photocathode gun to produce low emittance bunches for applications such as a mono-energetic MeV {gamma} ray source (in collaboration with LLNL) and a photoinjector for a compact FEL. Beam dynamics studies are being done for a configuration consisting of a 5.5-cell X-band gun followed by several 53-cell high-gradient X-band accelerator structures. A fully 3D program, ImpactT, is used to track particles taking into account space charge forces, short-range longitudinal and transverse wakefields, and the 3D rf fields in the structures, including the quadrupole component of the couplers. The effect of misalignments of the various elements, including the drive-laser, gun, solenoid and accelerator structures, are evaluated. This paper presents these results and estimates of the expected bunch emittance vs cathode gradient, and the effects of mixing between the fundamental and off-frequency longitudinal modes. An X-band gun at SLAC has been shown to operate reliably with a 200 MV/m acceleration gradient at the cathode, which is nearly twice the 115 MV/m acceleration gradient in the LCLS gun. The higher gradient should roughly balance the space charge related transverse emittance growth for the same bunch charge but provide a 3-4 times shorter bunch length. The shorter length would make the subsequent bunch compression easier and allow for a more effective use of emittance exchange. Such a gun can also be used with an X-band linac to produce a compact FEL or g ray source that would require rf sources of only one frequency for beam generation and acceleration. The feasibility of using an X-band rf photocathode gun and accelerator structures to generate high quality electron beams for compact FELs and g ray sources is being studied at SLAC. Results from the X-band photoinjector beam dynamics studies are reported in this paper
HOM Damping Coupler Design for the 400-MHz RF Dipole Compact Crab Cavity for the LHC HiLumi Upgrade
Crab cavities are adapted as the baseline design for the LHC HiLumi upgrade to achieve head-on beam-beam collisions for further improvement in luminosity. A 400- MHz compact RF dipole crab cavity design was developed by a joint effort between Old Dominion University and SLAC under the support of US LARP program. This design has shown very favorable RF parameters and can fit into the available beamline spacing for both vertical and horizontal crabbing schemes. A niobium proof-of-principle cavity based on such a design has been manufactured for vertical test. In addition, there are stringent wakefield requirements that needed to be met for such a cavity in order to preserve the quality of the circulating beams. In this paper, we will discuss different damping schemes for such a compact design and present the HOM coupler designs to meet the damping requirements
- …