2,271 research outputs found
Magnetic polarons and magnetoresistance in EuB6
EuB6 is a low carrier density ferromagnet which exhibits large
magnetoresistance, positive or negative depending on temperature. The formation
of magnetic polarons just above the magnetic critical temperature has been
suggested by spin-flip Raman scattering experiments. We find that the fact that
EuB6 is a semimetal has to be taken into account to explain its electronic
properties, including magnetic polarons and magnetoresistance.Comment: 6 pages, 1 figur
Numerical calculations of effective elastic properties of two cellular structures
Young's moduli of regular two-dimensional truss-like and eye-shape-like
structures are simulated by using the finite element method. The structures are
the idealizations of soft polymeric materials used in the electret
applications. In the simulations size of the representative smallest units are
varied, which changes the dimensions of the cell-walls in the structures. A
power-law expression with a quadratic as the exponential term is proposed for
the effective Young's moduli of the systems as a function of the solid volume
fraction. The data is divided into three regions with respect to the volume
fraction; low, intermediate and high concentrations. The parameters of the
proposed power-law expression in each region are later represented as a
function of the structural parameters, unit-cell dimensions. The presented
expression can be used to predict structure/property relationship in materials
with similar cellular structures. It is observed that the structures with
volume fractions of solid higher than 0.15 exhibit the importance of the
cell-wall thickness contribution in the elastic properties. The cell-wall
thickness is the most significant factor to predict the effective Young's
modulus of regular cellular structures at high volume fractions of solid. At
lower concentrations of solid, eye-like structure yields lower Young's modulus
than the truss-like structure with the similar anisotropy. Comparison of the
numerical results with those of experimental data of poly(propylene) show good
aggreement regarding the influence of cell-wall thickness on elastic properties
of thin cellular films.Comment: 7 figures and 2 table
Magnetic metamaterials at telecommunication and visible frequencies
Arrays of gold split-rings with 50-nm minimum feature size and with an LC
resonance at 200-THz frequency (1500-nm wavelength) are fabricated. For normal
incidence conditions, they exhibit a pronounced fundamental magnetic mode,
arising from a coupling via the electric component of the incident light. For
oblique incidence, a coupling via the magnetic component is demonstrated as
well. Moreover, we identify a novel higher-order magnetic resonance at around
370 THz (800-nm wavelength) that evolves out of the Mie resonance for oblique
incidence. Comparison with theory delivers good agreement and also shows that
the structures allow for a negative magnetic permeability.Comment: 4 pages, 3 figure
Understanding the dynamics of photoionization-induced solitons in gas-filled hollow-core photonic crystal fibers
We present in detail our developed model [Saleh et al., Phys. Rev. Lett. 107]
that governs pulse propagation in hollow-core photonic crystal fibers filled by
an ionizing gas. By using perturbative methods, we find that the
photoionization process induces the opposite phenomenon of the well-known Raman
self-frequency red-shift of solitons in solid-core glass fibers, as was
recently experimentally demonstrated [Hoelzer et al., Phys. Rev. Lett. 107].
This process is only limited by ionization losses, and leads to a constant
acceleration of solitons in the time domain with a continuous blue-shift in the
frequency domain. By applying the Gagnon-B\'{e}langer gauge transformation,
multi-peak `inverted gravity-like' solitary waves are predicted. We also
demonstrate that the pulse dynamics shows the ejection of solitons during
propagation in such fibers, analogous to what happens in conventional
solid-core fibers. Moreover, unconventional long-range non-local interactions
between temporally distant solitons, unique of gas plasma systems, are
predicted and studied. Finally, the effects of higher-order dispersion
coefficients and the shock operator on the pulse dynamics are investigated,
showing that the resonant radiation in the UV [Joly et al., Phys. Rev. Lett.
106] can be improved via plasma formation.Comment: 9 pages, 10 figure
High-Resolution Kinoform X-Ray Optics Printed via 405 nm 3D Laser Lithography
Efficient focusing of X-rays is essential for high-resolution X-ray microscopy. Diffractive X-ray optics called kinoforms offer the highest focusing efficiencies in theory. However, they have long remained unavailable due to their challenging nanofabrication. Recently, various X-ray optic geometries including kinoforms have been realized using 3D laser lithography at near-infrared wavelengths. As the smallest features (period) of the kinoform determines the resolving power, there is a natural drive to find ways to fabricate kinoforms with ever smaller features. Here, a custom-built 3D laser lithography setup with an excitation wavelength of 405 nm is used, which allows to half the smallest period of the kinoforms compared to previous work. A 40% improvement in scanning transmission X-ray microscopy image resolution, that is, a cutoff resolution of 145 nm, and an efficiency of 7.6% at 700 eV is achieved. A reconstructed pixel size of 18.5 nm, reaching the limit imposed by the design of the microscopy set-up, is demonstrated through ptychographic imaging of a magnetic sample which has a strongly reduced contrast mechanism. Moreover, X-ray lenses manufactured by 405 nm 3D laser lithography have the potential to become much less expensive than X-ray lenses made by other means
Observation of Chirality‐Induced Roton‐Like Dispersion in a 3D Micropolar Elastic Metamaterial
A theoretical paper based on chiral micropolar effective-medium theory suggested the possibility of unusual roton-like acoustical-phonon dispersion relations in 3D elastic materials. Here, as a first novelty, the corresponding inverse problem is solved, that is, a specific 3D chiral elastic metamaterial structure is designed, the behavior of which follows this effective-medium description. The metamaterial structure is based on a simple-cubic lattice of cubes, each of which not only has three translational but also three rotational degrees of freedom. The additional rotational degrees of freedom are crucial within micropolar elasticity. The cubes and their degrees of freedom are coupled by a chiral network of slender rods. As a second novelty, this complex metamaterial is manufactured in polymer form by 3D laser printing and its behavior is characterized experimentally by phonon-band-structure measurements. The results of these measurements, microstructure finite-element calculations, and solutions of micropolar effective-medium theory are in good agreement. The roton-like dispersion behavior of the lowest phonon branch results from two aspects. First, chirality splits the transverse acoustical branches as well as the transverse optical branches. Second, chirality leads to an ultrastrong coupling and hybridization of chiral acoustical and optical phonons at finite wavevectors
Fluctuation induced hopping and spin polaron transport
We study the motion of free magnetic polarons in a paramagnetic background of
fluctuating local moments. The polaron can tunnel only to nearby regions of
local moments when these fluctuate into alignment. We propose this fluctuation
induced hopping as a new transport mechanism for the spin polaron. We calculate
the diffusion constant for fluctuation induced hopping from the rate at which
local moments fluctuate into alignment. The electrical resistivity is then
obtained via the Einstein relation. We suggest that the proposed transport
mechanism is relevant in the high temperature phase of the Mn pyrochlore
colossal magneto resistance compounds and Europium hexaboride.Comment: 8 pages, 3 figure
High amp; 8208;Resolution Kinoform X Ray Optics Printed via 405 nm 3D Laser Lithography
Efficient focusing of X rays is essential for high resolution X ray microscopy. Diffractive X ray optics called kinoforms offer the highest focusing efficiencies in theory. However, they have long remained unavailable due to their challenging nanofabrication. Recently, various X ray optic geometries including kinoforms have been realized using 3D laser lithography at near infrared wavelengths. As the smallest features period of the kinoform determines the resolving power, there is a natural drive to find ways to fabricate kinoforms with ever smaller features. Here, a custom built 3D laser lithography setup with an excitation wavelength of 405 nm is used, which allows to half the smallest period of the kinoforms compared to previous work. A 40 improvement in scanning transmission X ray microscopy image resolution, that is, a cutoff resolution of 145 nm, and an efficiency of 7.6 at 700 eV is achieved. A reconstructed pixel size of 18.5 nm, reaching the limit imposed by the design of the microscopy set up, is demonstrated through ptychographic imaging of a magnetic sample which has a strongly reduced contrast mechanism. Moreover, X ray lenses manufactured by 405 nm 3D laser lithography have the potential to become much less expensive than X ray lenses made by other mean
- …