758 research outputs found
Finite-Element Simulations of Light Propagation through Circular Subwavelength Apertures
Light transmission through circular subwavelength apertures in metallic films
with surrounding nanostructures is investigated numerically. Numerical results
are obtained with a frequency-domain finite-element method. Convergence of the
obtained observables to very low levels of numerical error is demonstrated.
Very good agreement to experimental results from the literature is reached, and
the utility of the method is demonstrated in the investigation of the influence
of geometrical parameters on enhanced transmission through the apertures
Electric-field-induced phase transition of <001> oriented Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals
oriented 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 single crystals were poled under
different electric fields, i.e. Epoling=4 kV/cm and Epoling=13 kV/cm. In
addition to the temperature-dependent dielectric constant measurement, X-ray
diffraction was also used to identify the poling-induced phase transitions.
Results showed that the phase transition significantly depends on the poling
intensity. A weaker field (Epoling=4 kV/cm) can overcome the effect of random
internal field to perform the phase transition from rhombohedral ferroelectric
state with short range ordering (microdomain) FESRO to rhombohedral
ferroelectric state with long range ordering (macrodomain) FElRO. But the
rhombohedral ferroelectric to tetragonal ferroelectric phase transition
originating from to polarization rotation can only be induced by a
stronger field (Epoling=13 kV/cm). The sample poled at Epoling=4 kV/cm showed
higher piezoelectric constant, d33>1500 pC/N, than the sample poled at
Epoling=13 kV/cm.Comment: 7 pages, 2 figure
Random Field Models for Relaxor Ferroelectric Behavior
Heat bath Monte Carlo simulations have been used to study a four-state clock
model with a type of random field on simple cubic lattices. The model has the
standard nonrandom two-spin exchange term with coupling energy and a random
field which consists of adding an energy to one of the four spin states,
chosen randomly at each site. This Ashkin-Teller-like model does not separate;
the two random-field Ising model components are coupled. When , the
ground states of the model remain fully aligned. When , a
different type of ground state is found, in which the occupation of two of the
four spin states is close to 50%, and the other two are nearly absent. This
means that one of the Ising components is almost completely ordered, while the
other one has only short-range correlations. A large peak in the structure
factor appears at small for temperatures well above the transition
to long-range order, and the appearance of this peak is associated with slow,
"glassy" dynamics. The phase transition into the state where one Ising
component is long-range ordered appears to be first order, but the latent heat
is very small.Comment: 7 pages + 12 eps figures, to appear in Phys Rev
Design concepts for broadband high-efficiency DOEs
Several design-concepts are presented for so-called efficiency achromatized diffractive optical elements (EA-DOEs) possessing diffraction efficiency larger than 97% over a broad spectral range. We start with tracing two different methods for surface relief profiles well known from the literature: common depth and multilayer EA-DOEs. Successively we present the following new approaches together with design parameters and performance properties: 1) gradient-index EA DOEs, 2) sub-wavelength EA-DOEs, and 3) a so-called cut-and-paste strategy. All designs are based on scalar assumptions and certain necessary dispersion relations of two different materials. The scalar assumption is no real limitation as the minimum zone width of our main application, the correction of chromatic aberrations, is 50 -100 times the wavelength. From aforementioned relations, design parameters as profile heights are derived and the resulting diffraction efficiency can be deduced. Additionally it turns out that the necessary dispersion relation concerning the sub-wavelength EA-DOE is the same as for the common depth EA-DOE. Moreover, for the multilayer EA-DOE we were able to show that if the dispersion relations of the materials can be accurately described by a second order Cauchy series, the efficiency becomes generic and will be the same regardless of which materials are chosen. By proper choice of the materials, all types of EA-DOEs yield thicknesses of 10 - 30 µm which is more than ten times larger than for conventional DOEs. Due to the small refractive index difference of GRIN materials, such EA-DOEs exhibit thicknesses of 90 µm and more. Therefore, it is advisable to look for material combinations which yield thicknesses as small as possible
Phyto-oestrogens affect fertilisation and embryo development in vitro in sheep
Phyto-oestrogens such as isoflavones are natural compounds that can profoundly affect reproductive function. In the present study, we tested whether including isoflavone compounds (genistein, biochanin A, formononetin) in the maturation medium would affect the outcomes for ovine oocytes in vitro. Each isoflavone compound was evaluated at five concentrations (0, 2.5, 5, 10, 25µgmL-1) and the entire protocol was repeated four times. Cumulus-oocyte complexes were randomly allocated to the treatments, then fertilised and cultured in vitro. Compared with control (0µgmL-1), the lower concentrations of isoflavone (2.5, 5 and 10µgmL-1) had no detectable effect on the rates of cleavage or embryo development, or on embryo total cell counts (TCC). However, the highest concentration (25µgmL-1) of all three isoflavones exerted a variety of effects (P<0.05): genistein decreased cleavage rate, blastocyst rate and blastocyst efficiency (blastocysts produced per 100 oocytes); biochanin A decreased cleavage rate and blastocyst efficiency; and formononetin decreased blastocyst rate and blastocyst efficiency. Biochanin A (25µgmL-1) reduced embryo TCC specifically at the hatched blastocyst stage (P<0.05). We conclude that the presence of isoflavones at 25µgmL-1 during IVM decreases the cleavage rate and inhibits blastocyst hatching
Vibrational analysis of the v1+v3 band of the chlorine dioxide molecule in doublet electronic state
We report the spectrum of the v1+v3 band of chlorine dioxide centered in the infrared atmospheric window at 2038.934 cm-1 measured with essentially Doppler limited resolution at the instrumental line width of 0.003 cm-1 using the Bruker IFS 125 HR Fourier transform infrared spectrometer. The number of 2000 assigned transitions for the v1+v3 band with Nmax=59 and Ka max=15 provide a set of 22 accurate effective Hamiltonian parameters for the v1+v3 band
A boundary element scheme for three-dimensional acoustic radiation with flow
A boundary element approach is proposed for acoustical radiation in non-uniform, low Mach number flows. The formulation utilizes a transformation, valid at low Mach number for short wavelength disturbances, which converts this problem into an analogous no-flow problem for the same geometry. Two distinct boundary integral schemes are considered. An overdetermined combined surface-interior formulation and a combined surface-surface derivative formulation are both used to calculate the velocity potential due to the vibration of an arbitrary body in a uniform mean flow. Results are presented for the test cases of pulsating and juddering spheres in low Mach number flows. Good agreement is established between the results produced by the present boundary element formulations and those obtained from an analytic solution and an alternative numerical (finite element) scheme
- …