246 research outputs found
Preliminary analysis of a downsized advanced gas-turbine engine in a subcompact car
Relative fuel economy advantages exist for a ceramic turbine engine when it is downsized for a small car were investigated. A 75 kW (100 hp) single shaft engine under development was analytically downsized to 37 kW (50 hp) and analyzed with a metal belt continuously variable transmission in a synthesized car. With gasoline, a 25% advantage was calculated over that of a current spark ignition engine, scaled to the same power, using the same transmission and car. With diesel fuel, a 21% advantage was calculated over that of a similar diesel engine vehicle
Analysis of regenerated single-shaft ceramic gas-turbine engines and resulting fuel economy in a compact car
Ranges in design and off-design operating conditions of an advanced gas turbine and their effects on fuel economy were analyzed. The assumed engine incorporated a single stage radial flow turbine and compressor with fixed geometry. Fuel economies were calculated over the composite driving cycle with gasoline as the fuel. At a constant turbine-inlet temperature, with a regenerator sized for a full power effectiveness the best fuel economies ranged from 11.1 to 10.2 km/liter (26.2 to 22.5 mpg) for full power turbine tip speeds of 770 to 488m/sec (2530 to 1600ft/sec), respectively
Fuel economy screening study of advanced automotive gas turbine engines
Fuel economy potentials were calculated and compared among ten turbomachinery configurations. All gas turbine engines were evaluated with a continuously variable transmission in a 1978 compact car. A reference fuel economy was calculated for the car with its conventional spark ignition piston engine and three speed automatic transmission. Two promising engine/transmission combinations, using gasoline, had 55 to 60 percent gains over the reference fuel economy. Fuel economy sensitivities to engine design parameter changes were also calculated for these two combinations
Downsizing assessment of automotive Stirling engines
A 67 kW (90 hp) Stirling engine design, sized for use in a 1984 1440 kg (3170 lb) automobile was the focal point for developing automotive Stirling engine technology. Since recent trends are towards lighter vehicles, an assessment was made of the applicability of the Stirling technology being developed for smaller, lower power engines. Using both the Philips scaling laws and a Lewis Research Center (Lewis) Stirling engine performance code, dimensional and performance characteristics were determined for a 26 kW (35 hp) and a 37 kW (50 hp) engine for use in a nominal 907 kg (2000 lb) vehicle. Key engine elements were sized and stressed and mechanical layouts were made to ensure mechanical fit and integrity of the engines. Fuel economy estimates indicated that the Stirling engine would maintain a 30 to 45 percent fuel economy advantage comparable spark ignition and diesel powered vehicles in the 1984 period
Assessment of alternative power sources for mobile mining machinery
Alternative mobile power sources for mining applications were assessed. A wide variety of heat engines and energy systems was examined as potential alternatives to presently used power systems. The present mobile power systems are electrical trailing cable, electrical battery, and diesel - with diesel being largely limited in the United States to noncoal mines. Each candidate power source was evaluated for the following requirements: (1) ability to achieve the duty cycle; (2) ability to meet Government regulations; (3) availability (production readiness); (4) market availability; and (5) packaging capability. Screening reduced the list of candidates to the following power sources: diesel, stirling, gas turbine, rankine (steam), advanced electric (batteries), mechanical energy storage (flywheel), and use of hydrogen evolved from metal hydrides. This list of candidates is divided into two classes of alternative power sources for mining applications, heat engines and energy storage systems
Interference effects at Mach 1.9 on a horizontal tail due to trailing shock waves from an axisymmetric body with an exiting jet
DEVELOPMENT OF A STRATEGIC BUSINESS DECISION-MAKING ENVIRONMENT FOR COMMERCIAL JET ENGINE SELECTION
Presented at the 41st AIAA Aerospace Sciences, Meeting and Exhibit, Reno, NV, January 6-10, 2003.In today?s business climate, aerospace companies
are more than ever in need of rational methods and
techniques that provide insights as to the best
strategies which may be pursued for increased
profitability and risk mitigation. However, the use of subjective, anecdotal decision-making remains
prevalent due to the absence of analytical methods
capable of capturing and forecasting future needs.
Negotiations between airframe and engine
manufacturers could benefit greatly from a
structured environment that facilitates efficient,
rational, decision-making. Creation of such an
environment can be developed through a parametric
physics-based, stochastic formulation that uses
meta-models to expedite the process. This paper
describes such an approach in order to demonstrate
the types of insights that might be gained as an
engine manufacturer tries to forecast the effects of
uncertainties and future vehicle requirements on
engine related characteristics for the design of a
hypothetical regional business jet. Game theory
concepts are suggested as a potential means by
which one can attach business payoffs to the
selection of any engine design point
The Building Blocks of Interoperability. A Multisite Analysis of Patient Demographic Attributes Available for Matching.
BackgroundPatient matching is a key barrier to achieving interoperability. Patient demographic elements must be consistently collected over time and region to be valuable elements for patient matching.ObjectivesWe sought to determine what patient demographic attributes are collected at multiple institutions in the United States and see how their availability changes over time and across clinical sites.MethodsWe compiled a list of 36 demographic elements that stakeholders previously identified as essential patient demographic attributes that should be collected for the purpose of linking patient records. We studied a convenience sample of 9 health care systems from geographically distinct sites around the country. We identified changes in the availability of individual patient demographic attributes over time and across clinical sites.ResultsSeveral attributes were consistently available over the study period (2005-2014) including last name (99.96%), first name (99.95%), date of birth (98.82%), gender/sex (99.73%), postal code (94.71%), and full street address (94.65%). Other attributes changed significantly from 2005-2014: Social security number (SSN) availability declined from 83.3% to 50.44% (p<0.0001). Email address availability increased from 8.94% up to 54% availability (p<0.0001). Work phone number increased from 20.61% to 52.33% (p<0.0001).ConclusionsOverall, first name, last name, date of birth, gender/sex and address were widely collected across institutional sites and over time. Availability of emerging attributes such as email and phone numbers are increasing while SSN use is declining. Understanding the relative availability of patient attributes can inform strategies for optimal matching in healthcare
Spatial Modeling of Vesicle Transport and the Cytoskeleton: The Challenge of Hitting the Right Road
The membrane trafficking machinery provides a transport and sorting system for many cellular proteins. We propose a mechanistic agent-based computer simulation to integrate and test the hypothesis of vesicle transport embedded into a detailed model cell. The method tracks both the number and location of the vesicles. Thus both the stochastic properties due to the low numbers and the spatial aspects are preserved. The underlying molecular interactions that control the vesicle actions are included in a multi-scale manner based on the model of Heinrich and Rapoport (2005). By adding motor proteins we can improve the recycling process of SNAREs and model cell polarization. Our model also predicts that coat molecules should have a high turnover at the compartment membranes, while the turnover of motor proteins has to be slow. The modular structure of the underlying model keeps it tractable despite the overall complexity of the vesicle system. We apply our model to receptor-mediated endocytosis and show how a polarized cytoskeleton structure leads to polarized distributions in the plasma membrane both of SNAREs and the Ste2p receptor in yeast. In addition, we can couple signal transduction and membrane trafficking steps in one simulation, which enables analyzing the effect of receptor-mediated endocytosis on signaling
- …