249 research outputs found

    Chloroplast-Derived Enzyme Cocktails Hydrolyse Lignocellulosic Biomass and Release Fermentable Sugars

    Get PDF
    It is widely recognized that biofuel production from lignocellulosic materials is limited by inadequate technology to efficiently and economically release fermentable sugars from the complex multi-polymeric raw materials. Therefore, endoglucanases, exoglucanase, pectate lyases, cutinase, swollenin, xylanase, acetyl xylan esterase, beta glucosidase and lipase genes from bacteria or fungi were expressed in E. coli or tobacco chloroplasts. A PCR based method was used to clone genes without introns from Trichoderma reesei genomic DNA. Homoplasmic transplastomic lines showed normal phenotype and were fertile. Based on observed expression levels, up to 49, 64 and 10,751 million units of pectate lyases or endoglucanase can be produced annually, per acre of tobacco. Plant production cost of endoglucanase is 3,100-fold and pectate lyase is 1,057 or 1,480 fold lower than the same recombinant enzymes sold commercially, produced via fermentation. Chloroplast-derived enzymes had higher temperature stability and wider pH optima than enzymes expressed in E. coli. Plant crude-extracts showed higher enzyme activity than E. coli with increasing protein concentration, demonstrating their direct utility without purification. Addition of E. coliextracts to the chloroplast-derived enzymes significantly decreased their activity. Chloroplast-derived crude-extract enzyme cocktails yielded more (up to 3,625%) glucose from filter paper, pine wood or citrus peel than commercial cocktails. Furthermore, pectate lyase transplastomic plants showed enhanced resistance to Erwina soft rot. This is the first report of using plant-derived enzyme cocktails for production of fermentable sugars from lignocellulosic biomass. Limitations of higher cost and lower production capacity of fermentation systems are addressed by chloroplast-derived enzyme cocktails

    Chloroplast-Derived Enzyme Cocktails Hydrolyse Lignocellulosic Biomass and Release Fermentable Sugars

    Get PDF
    It is widely recognized that biofuel production from lignocellulosic materials is limited by inadequate technology to efficiently and economically release fermentable sugars from the complex multi-polymeric raw materials. Therefore, endoglucanases, exoglucanase, pectate lyases, cutinase, swollenin, xylanase, acetyl xylan esterase, beta glucosidase and lipase genes from bacteria or fungi were expressed in E. coli or tobacco chloroplasts. A PCR based method was used to clone genes without introns from Trichoderma reesei genomic DNA. Homoplasmic transplastomic lines showed normal phenotype and were fertile. Based on observed expression levels, up to 49, 64 and 10,751 million units of pectate lyases or endoglucanase can be produced annually, per acre of tobacco. Plant production cost of endoglucanase is 3,100-fold and pectate lyase is 1,057 or 1,480 fold lower than the same recombinant enzymes sold commercially, produced via fermentation. Chloroplast-derived enzymes had higher temperature stability and wider pH optima than enzymes expressed in E. coli. Plant crude-extracts showed higher enzyme activity than E. coli with increasing protein concentration, demonstrating their direct utility without purification. Addition of E. coliextracts to the chloroplast-derived enzymes significantly decreased their activity. Chloroplast-derived crude-extract enzyme cocktails yielded more (up to 3,625%) glucose from filter paper, pine wood or citrus peel than commercial cocktails. Furthermore, pectate lyase transplastomic plants showed enhanced resistance to Erwina soft rot. This is the first report of using plant-derived enzyme cocktails for production of fermentable sugars from lignocellulosic biomass. Limitations of higher cost and lower production capacity of fermentation systems are addressed by chloroplast-derived enzyme cocktails

    Expression of Fungal Cutinase and Swollenin in Tobacco Chloroplasts Reveals Novel Enzyme Functions and/or Substrates

    Get PDF
    In order to produce low-cost biomass hydrolyzing enzymes, transplastomic lines were generated that expressed cutinase or swollenin within chloroplasts. While swollenin expressing plants were homoplasmic, cutinase transplastomic lines remained heteroplasmic. Both transplastomic lines showed interesting modifications in their phenotype, chloroplast structure, and functions. Ultrastructural analysis of chloroplasts from cutinase- and swollenin-expressing plants did not show typical lens shape and granal stacks. But, their thylakoid membranes showed unique scroll like structures and chloroplast envelope displayed protrusions, stretching into the cytoplasm. Unusual honeycomb structures typically observed in etioplasts were observed in mature chloroplasts expressing swollenin. Treatment of cotton fiber with chloroplast-derived swollenin showed enlarged segments and the intertwined inner fibers were irreversibly unwound and fully opened up due to expansin activity of swollenin, causing disruption of hydrogen bonds in cellulose fibers. Cutinase transplastomic plants showed esterase and lipase activity, while swollenin transplastomic lines lacked such enzyme activities. Higher plants contain two major galactolipids, monogalactosyldiacylglycerol (MGDG) and digalactosyldiacylglycerol (DGDG), in their chloroplast thylakoid membranes that play distinct roles in their structural organization. Surprisingly, purified cutinase effectively hydrolyzed DGDG to MGDG, showing alpha galactosidase activity. Such hydrolysis resulted in unstacking of granal thylakoids in chloroplasts and other structural changes. These results demonstrate DGDG as novel substrate and function for cutinase. Both MGDG and DGDG were reduced up to 47.7% and 39.7% in cutinase and 68.5% and 67.5% in swollenin expressing plants. Novel properties and functions of both enzymes reported here for the first time should lead to better understanding and enhanced biomass hydrolysis

    The conserved C-terminus of the PcrA/UvrD helicase interacts directly with RNA polymerase

    Get PDF
    Copyright: © 2013 Gwynn et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Funding: This work was supported by a Wellcome Trust project grant to MD (Reference: 077368), an ERC starting grant to MD (Acronym: SM-DNA-REPAIR) and a BBSRC project grant to PM, NS and MD (Reference: BB/I003142/1). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.Peer reviewedPublisher PD

    Current trends in leather science

    Get PDF
    Abstract In preparing the second edition of ‘Tanning Chemistry. The Science of Leather.’, the literature was updated and the content was revised and reviewed. Here, the new findings are presented and discussed. Notable developments include the necessary rethinking of the mechanism of sulfide unhairing because of new understanding of the aqueous chemistry of sulfide species. Revision upwards of the value of the second pKa for sulfide species ionisation means that S2− cannot exist in an aqueous medium, so the unhairing species in hair burn reactions is HS−. Although the technology remains the same, this means the mechanisms of associated reactions such as immunisation must be revised. Rawstock preservation has benefitted from studies of the potential role of materials from plants which accumulate salt, but which also contribute terpene compounds. There is also further discussion on the continuing issue of chromium (VI) in the leather industry. The application to processing of new solvents, ionic liquids and deep eutectics, is the coming technology, which offers transforming options for new chemistries and products. Renewed interest in vegetable tanning and methods of wet white processing are current trends. Also, within the topic of reagent delivery is processing in a solid medium of plastic beads. Graphical abstrac

    Strong Neutral Spatial Effects Shape Tree Species Distributions across Life Stages at Multiple Scales

    Get PDF
    Traditionally, ecologists use lattice (regional summary) count data to simulate tree species distributions to explore species coexistence. However, no previous study has explicitly compared the difference between using lattice count and basal area data and analyzed species distributions at both individual species and community levels while simultaneously considering the combined scenarios of life stage and scale. In this study, we hypothesized that basal area data are more closely related to environmental variables than are count data because of strong environmental filtering effects. We also address the contribution of niche and the neutral (i.e., solely dependent on distance) factors to species distributions. Specifically, we separately modeled count data and basal area data while considering life stage and scale effects at the two levels with simultaneous autoregressive models and variation partitioning. A principal coordinates of neighbor matrix (PCNM) was used to model neutral spatial effects at the community level. The explained variations of species distribution data did not differ significantly between the two types of data at either the individual species level or the community level, indicating that the two types of data can be used nearly identically to model species distributions. Neutral spatial effects represented by spatial autoregressive parameters and the PCNM eigenfunctions drove species distributions on multiple scales, different life stages and individual species and community levels in this plot. We concluded that strong neutral spatial effects are the principal mechanisms underlying the species distributions and thus shape biodiversity spatial patterns

    Design of agile supply chains including analysing the trade-off between number of partners and reliability

    Get PDF
    The reliability of supply partners is particularly vital in agile supply chains as it is vulnerable to the inability of a supply partner to meet its high responsiveness and flexibility requirements resulting in the disruption of the whole network. Disruption can have expensive and extensive results for the entire agile supply chain. To mitigate the risk of disruption and improve the reliability of the whole agile supply chain, decision-makers need to pay more attention to supply chain design and construction, whilst simultaneously taking into account the sourcing strategy decisions. This paper proposes a series of models for the design of agile supply chains using dynamic programming modelling. These provide decision-makers with a systematic way of analysing one of the key decisions of sourcing strategy, namely the trade-off between the number of supply partners and reliability. The efficacy of the models is demonstrated through their application to a Chinese bus and coach manufacturer by way of an empirical illustration. The results show that this approach is effective for this application and it can be applied in other related decision-making scenarios. The methods offered in this paper provide managers with a practical tool to design their agile supply chains while considering the trade-offs between the number of partners and the reliability of the entire agile supply chain

    Processing of leather using deep eutectic solvents

    Get PDF
    Processing of leather has an historical reputation as a chemically and energetically intensive process that produces large volumes of aqueous waste. Saline pollution combined with heavy-metal, dyes and acid and base streams make leather production an ecologically sensitive industry. The current study shows that a variety of deep eutectic solvents (DESs) may be used for the tanning, fatliquoring and dyeing of animal hides, being particularly useful for mineral (chromium) and vegetable tanning processes. The tanning agents are able to penetrate rapidly into the hide, driven by lyotropic swelling due to their high ionic strength. The samples are shown to have similar tanning agent content to the currently used aqueous chromium(III) sulfate solution; however, the waste metal content is shown to be significantly reduced. Incorporation of the DES Ethaline into the leather significantly alters the swelling properties of the leather increasing the flexibility and ductility of the material, therefore acting in the same manner as a fatliquor that lubricates or plasticizes the fibrous structure of the collagen. Ethaline was also used to transport a lysochromic dye throughout the cross section of the leather, and the hydrophobicity of the dye prevents leaching into the aqueous wash solution. Physical measurements show that leather processed using DESs have similar mechanical properties to that processed using conventional aqueous systems
    corecore