1,170 research outputs found
Performance of a GridPix detector based on the Timepix3 chip
A GridPix readout for a TPC based on the Timepix3 chip is developed for
future applications at a linear collider. The GridPix detector consists of a
gaseous drift volume read out by a single Timepix3 chip with an integrated
amplification grid. Its performance is studied in a test beam with 2.5 GeV
electrons. The GridPix detector detects single ionization electrons with high
efficiency. The Timepix3 chip allowed for high sample rates and time walk
corrections. Diffusion is found to be the dominating error on the track
position measurement both in the pixel plane and in the drift direction, and
systematic distortions in the pixel plane are below 10 m. Using a
truncated sum, an energy loss (dE/dx) resolution of 4.1% is found for an
effective track length of 1 m.Comment: To be published in Nuclear Instruments and Methods in Physics
Research Section
Timing performance of the Timepix4 front-end
A characterisation of the Timepix4 pixel front-end with a strong focus on
timing performance is presented. Externally generated test pulses were used to
probe the per-pixel time-to-digital converter (TDC) and measure the time-bin
sizes by precisely controlling the test-pulse arrival time in steps of 10 ps.
The results indicate that the TDC can achieve a time resolution of 60 ps,
provided that a calibration is performed to compensate for frequency variation
in the voltage controlled oscillators of the pixel TDCs. The internal clock
distribution system of Timepix4 was used to control the arrival time of
internally generated analog test pulses in steps of about 20 ps. The analog
test pulse mechanism injects a controlled amount of charge directly into the
analog front-end (AFE) of the pixel, and was used to measure the time
resolution as a function of signal charge, independently of the TDC. It was
shown that for the default configuration, the AFE time resolution in the
hole-collecting mode is limited to 105 ps. However, this can be improved up to
about 60 ps by increasing the preamplifier bias-current at the cost of
increased power dissipation. For the electron-collecting mode, an AFE time
resolution of 47 ps was measured for a bare Timepix4 device at a signal charge
of 21 ke. It was observed that additional input capacitance from a bonded
sensor reduces this figure to 62 ps
Timing measurements with a 3D silicon sensor on Timepix3 in a 180 GeV/<i>c</i> hadron beam
Test beam measurements have been carried out with a 3D sensor on a Timepix3 ASIC and the time measurements are presented. The measurements are compared to those of a thin planar sensor on Timepix3. It is shown that for a perpendicularly incident beam the time resolution of both detectors is dominated by the Timepix3 front-end. The 3D detector is dominated by the time-to-digital conversion whereas the analog front-end jitter also gives a significant contribution for the thin planar detector. The 3D detector reaches an overall time resolution of 567 ± 6 ps compared to 683 ± 8 ps for the thin planar detector. For a grazing angle beam, however, the thin planar detector achieves a better time resolution because it has a lower pixel capacitance, and therefore suffers less from jitter in the analog front-end for the low charge signals that mainly occur in this type of measurement. Finally, it is also shown that the 3D and thin planar detector can achieve time resolutions for large clusters of about 100 ps and 250 ps, respectively, by combining many single hit measurements
Timing performance of the LHCb VELO Timepix3 Telescope
We performed a detailed study of the timing performance of the LHCb VELO
Timepix3 Telescope with a 180 GeV/c mixed hadron beam at the CERN SPS. A
twofold method was developed to improve the resolution of single-plane time
measurements, resulting in a more precise overall track time measurement. The
first step uses spatial information of reconstructed tracks in combination with
the measured signal charge in the sensor to correct for a mixture of different
effects: variations in charge carrier drift time; variations in signal
induction, which are the result of a non-uniform weighting field in the pixels;
and lastly, timewalk in the analog front-end. The second step corrects for
systematic timing offsets in Timepix3 that vary from -2 ns to 2 ns. By applying
this method, we improved the track time resolution from 43816 ps to
2764 ps
Charge collection properties of prototype sensors for the LHCb VELO upgrade
An extensive sensor testing campaign is presented, dedicated to measuring the
charge collection properties of prototype candidates for the Vertex Locator
(VELO) detector for the upgraded LHCb experiment. The charge collection is
measured with sensors exposed to fluences of up to , as well as with nonirradiated prototypes. The results are
discussed, including the influence of different levels of irradiation and bias
voltage on the charge collection properties. Charge multiplication is observed
on some sensors that were nonuniformly irradiated with 24 GeV protons, to the
highest fluence levels. An analysis of the charge collection near the guard
ring region is also presented, revealing significant differences between the
sensor prototypes. All tested sensor variants succeed in collecting the minimum
required charge of 6000 electrons after the exposure to the maximum fluence
Observation of Cabibbo-suppressed two-body hadronic decays and precision mass measurement of the baryon
The first observation of the singly Cabibbo-suppressed
and decays
is reported, using proton-proton collision data at a centre-of-mass energy of
, corresponding to an integrated luminosity of , collected with the LHCb detector between 2016 and 2018. The
branching fraction ratios are measured to be
,
. In addition, using the
decay channel, the baryon
mass is measured to be , improving the
precision of the previous world average by a factor of four.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2023-011.html (LHCb
public pages
- …