847 research outputs found
Recommended from our members
Anharmonic multi-phonon nonradiative transition: An ab initio calculation approach
Nonradiative carrier recombinations at deep centers in semiconductors are of great importance for both fundamental physics and device engineering. In this article, we provide a revised analysis of Huang’s original nonradiative multi-phonon (NMP) theory with ab initio calculations. First, we confirmed at the first-principles level that Huang’s concise formula gives the same results as the matrix-based formula, and that Huang’s high-temperature formula provides an analytical expression for the coupling constant in Marcus theory. Secondly, we correct for anharmonic effects by taking into account local phonon-mode variations for different charge states of a defect. The corrected capture rates for defects in GaN and SiC agree well with experiments
Coherence and the look number-based deformation gradient function model of INSAR
Author name used in this publication: X. L. DingVersion of RecordPublishe
Study on the distribution regularity of gas volume in multiphase pump
In order to reduce the phase separation, air plug and turbulence vortex in the multiphase
pump. The two-fluid model and the standard k-¦ turbulence model are selected, the distribution
regularity of gas phase volume within the multiphase pump is researched using the CFD software
about air-liquid two-phase under the different working conditions. The results of the study showed
that the gas phase gathers at the rim when the gas-liquid two-phase enter into the impeller inlet, and
the gas phase is gradually increased at the rim with the increase of the flow rate, the gas is
concentrated in the hub at the second half of the impeller, and the most serious aggregation is the
small flow rate condition. When the flow is constant, the gas obviously increases in the guide vane
hub with the increase of the gas volume fraction. With the increase of the gas volume fraction, the
uniformity of the gas phase in the circumferential direction is deteriorated in the inlet and the
middle of impeller, and the lower gas volume fraction region is decreased in the impeller. The
results of the study reveal the distribution regularity of gas volume within the multiphase pump,
provide the reference basis for the design of the multiphase pump under the higher gas volume
fraction
Effect of gas volume fraction on the vortex motion within the oil-gas multiphase pump
In order to research the regular pattern of the vortex within the oil-gas multiphase pump with the gas volume fraction changes, the standard K-epsilon turbulence model is selected, the gas-liquid two-phase flow field within the multiphase pump is calculated by the CFD software under the different gas volume fraction, the regular pattern of the vortex motion within the multiphase pump is analyzed under the different gas volume fraction. The results show that, from the impeller hub to the rim, the vortex in the guide vane is gradually become smaller, the vortex within the impeller is gradually obvious, and with the increase of the gas volume fraction, the flow separation, the backflow and the vortex phenomenon within the impeller and the guide vane are gradually increased. It is also found that the flow separation has a greater influence on the turbulent dissipation within the whole flow field, that is, the more serious the area of off flow, the greater the energy loss. The results provide an important theoretical basis for the optimal design of the structure of oil-gas multiphase pump
Visual Learning in Multiple-Object Tracking
Tracking moving objects in space is important for the maintenance of spatiotemporal continuity in everyday visual tasks. In the laboratory, this ability is tested using the Multiple Object Tracking (MOT) task, where participants track a subset of moving objects with attention over an extended period of time. The ability to track multiple objects with attention is severely limited. Recent research has shown that this ability may improve with extensive practice (e.g., from action videogame playing). However, whether tracking also improves in a short training session with repeated trajectories has rarely been investigated. In this study we examine the role of visual learning in multiple-object tracking and characterize how varieties of attention interact with visual learning.Participants first conducted attentive tracking on trials with repeated motion trajectories for a short session. In a transfer phase we used the same motion trajectories but changed the role of tracking targets and nontargets. We found that compared with novel trials, tracking was enhanced only when the target subset was the same as that used during training. Learning did not transfer when the previously trained targets and nontargets switched roles or mixed up. However, learning was not specific to the trained temporal order as it transferred to trials where the motion was played backwards.These findings suggest that a demanding task of tracking multiple objects can benefit from learning of repeated motion trajectories. Such learning potentially facilitates tracking in natural vision, although learning is largely confined to the trajectories of attended objects. Furthermore, we showed that learning in attentive tracking relies on relational coding of all target trajectories. Surprisingly, learning was not specific to the trained temporal context, probably because observers have learned motion paths of each trajectory independently of the exact temporal order
Quantitative test of the barrier nucleosome model for statistical positioning of nucleosomes up- and downstream of transcription start sites
The positions of nucleosomes in eukaryotic genomes determine which parts of
the DNA sequence are readily accessible for regulatory proteins and which are
not. Genome-wide maps of nucleosome positions have revealed a salient pattern
around transcription start sites, involving a nucleosome-free region (NFR)
flanked by a pronounced periodic pattern in the average nucleosome density.
While the periodic pattern clearly reflects well-positioned nucleosomes, the
positioning mechanism is less clear. A recent experimental study by Mavrich et
al. argued that the pattern observed in S. cerevisiae is qualitatively
consistent with a `barrier nucleosome model', in which the oscillatory pattern
is created by the statistical positioning mechanism of Kornberg and Stryer. On
the other hand, there is clear evidence for intrinsic sequence preferences of
nucleosomes, and it is unclear to what extent these sequence preferences affect
the observed pattern. To test the barrier nucleosome model, we quantitatively
analyze yeast nucleosome positioning data both up- and downstream from NFRs.
Our analysis is based on the Tonks model of statistical physics which
quantifies the interplay between the excluded-volume interaction of nucleosomes
and their positional entropy. We find that although the typical patterns on the
two sides of the NFR are different, they are both quantitatively described by
the same physical model, with the same parameters, but different boundary
conditions. The inferred boundary conditions suggest that the first nucleosome
downstream from the NFR (the +1 nucleosome) is typically directly positioned
while the first nucleosome upstream is statistically positioned via a
nucleosome-repelling DNA region. These boundary conditions, which can be
locally encoded into the genome sequence, significantly shape the statistical
distribution of nucleosomes over a range of up to ~1000 bp to each side.Comment: includes supporting materia
An experimental investigation into resonance dry grinding of hardened steel and nickel alloys with element of MQL
Current policies on environmental issues put extra pressures on manufacturing processes to be resource efficient and eco-friendly. However, in grinding processes, large amounts of cutting fluids are used. These fluids are not environmental friendly thus require proper management before disposal with associated cost. Hence, this work sets to explore low-frequency vibration in grinding in order to improve coolant application in conventional grinding at the first stage with the aim to introduce this into high efficiency deep grinding (HEDG) at latter stage. An attempt is made to grind nickel alloys with minimum quantity lubricant (MQL) as oppose to flood cooling. To achieve this with minimum alterations to the machine tool, a piezo-driven workpiece holder was developed for surface grinding. This simple innovative workpiece holder allowed oscillating during actual grinding process. However, this paper presents the results of low-frequency oscillatory grinding in dry and near-dry conditions. The response of the machine tool spindle unit is presented alongside with the workpiece holder response. In this investigation, hardened steels and nickel alloys were ground with vibration assistance. The grinding forces are illustrated together with the surface finish. The wheel performance is given in terms of grinding ratio
Extremely long quasiparticle spin lifetimes in superconducting aluminium using MgO tunnel spin injectors
There has been an intense search in recent years for long-lived
spin-polarized carriers for spintronic and quantum-computing devices. Here we
report that spin polarized quasi-particles in superconducting aluminum layers
have surprisingly long spin-lifetimes, nearly a million times longer than in
their normal state. The lifetime is determined from the suppression of the
aluminum's superconductivity resulting from the accumulation of spin polarized
carriers in the aluminum layer using tunnel spin injectors. A Hanle effect,
observed in the presence of small in-plane orthogonal fields, is shown to be
quantitatively consistent with the presence of long-lived spin polarized
quasi-particles. Our experiments show that the superconducting state can be
significantly modified by small electric currents, much smaller than the
critical current, which is potentially useful for devices involving
superconducting qubits
Recommended from our members
Finite element analysis and calculation method of residual flexural capacity of post-fire RC beams
Fire tests and subsequent bending tests of fourreinforced concrete (RC) beamswere performed. Based on these tests, the post-fire performance of RCbeams was further studied using finite element simulation through reasonable selection of suitable thermal and thermodynamic parameters of steel and concrete materials. A thermodynamic model of RC beams with three sides under fire was built using finite element analysis(FEA)software ABAQUS. The FEA model was validated with the results of fire tests. Different factors were taken into account for further parametric studies in fire using the proposed FE model.The results show that the main factors affecting the fire resistance of the beamsare the thickness of the concretecover, reinforcement ratio of longitudinal steel,the fire exposure timeandthe fire exposure sides. Based on the strength reduction formula at high temperature of steel and concrete, animproved section method was proposed to develop a calculation formula to calculate the flexural capacity of RC beams after fire. The theoretical calculation method proposed in this paper shows good agreement with FEA results, which can be used to calculate the flexuralcapacity of RC beams after fire
- …