4,099 research outputs found
Lubrication of nonconformal contacts
Minimum film thickness results for piezoviscous-rigid regime of lubrication are developed for a compressible Newtonian fluid with Roelands viscosity. The results provide a basis for the analysis and design of a wide range of machine elements operating in the piezoviscous-rigid regime of lubrication. A new numerical method of calculating elastic deformation in contact stresses is developed using a biquadratic polynomial to approximate the pressure distribution on the whole domain analyzed. The deformation of every node is expressed as a linear combination of the nodal pressures whose coefficients can be combined into an influence coefficient matrix. This approach has the advantages of improved numerical accuracy, less computing time and smaller storage size required for influence matrix. The ideal elastohydrodynamic lubrication is extended to real bearing systems in order to gain an understanding of failure mechanisms in machine elements. The improved elastic deformation calculation is successfully incorporated into the EHL numerical scheme. Using this revised numerical technique and the flow factor model developed by Patir and Cheng (1978) the surface roughness effects on the elastohydrodynamic lubrication of point contact is considered. Conditions typical of an EHL contact in the piezoviscous-elastic regime entrained in pure rolling are investigated. Results are compared with the smooth surface solutions. Experiments are conducted to study the transient EHL effects in instrument ball bearings
Piezoviscous effects in nonconformal contacts lubricated hydrodynamically
The analysis is concerned with the piezoviscous-rigid regime of lubrication for the general case of elliptical contacts. In this regime several formulas of the lubricant film thickness have been proposed by Hamrock and Dowson, by Dowson et al., and more recently by Houpert. However, either they do not include the load parameter W, which has a strong effect on film thickness, or they overestimate the film thickness by using the Barus formula for pressure-viscosity characteristics. The Roelands formula was used for the pressure-viscosity relationship. The effects of the dimensionless load, speed, and materials parameters, the radius ratio, and the lubricant entrainment direction were investigated. The dimensionless load parameter was varied over a range of one order of magnitude. The dimensionless speed parameter was varied by 5.6 times the lowest value. Conditions corresponding to the use of solid materials of steel, bronze, and silicon nitride and lubricants of paraffinic and naphthenic mineral oil were considered in obtaining the exponent in the dimensionless materials parameter. The radius ratio was varied from 0.2 to 64 (a configuration approaching a line contact). Forty-one cases were used in obtaining a minimum film thickness formula. Contour plots indicate in detail the pressure developed between the contacting solids
Orbital-Free Density Functional Theory: Kinetic Potentials and Ab-Initio Local Pseudopotentials
In the density functional (DF) theory of Kohn and Sham, the kinetic energy of
the ground state of a system of noninteracting electrons in a general external
field is calculated using a set of orbitals. Orbital free methods attempt to
calculate this directly from the electron density by approximating the
universal but unknown kinetic energy density functional. However simple local
approximations are inaccurate and it has proved very difficult to devise
generally accurate nonlocal approximations. We focus instead on the kinetic
potential, the functional derivative of the kinetic energy DF, which appears in
the Euler equation for the electron density. We argue that the kinetic
potential is more local and more amenable to simple physically motivated
approximations in many relevant cases, and describe two pathways by which the
value of the kinetic energy can be efficiently calculated. We propose two
nonlocal orbital free kinetic potentials that reduce to known exact forms for
both slowly varying and rapidly varying perturbations and also reproduce exact
results for the linear response of the density of the homogeneous system to
small perturbations. A simple and systematic approach for generating accurate
and weak ab-initio local pseudopotentials which produce a smooth slowly varying
valence component of the electron density is proposed for use in orbital free
DF calculations of molecules and solids. The use of these local
pseudopotentials further minimizes the possible errors from the kinetic
potentials. Our theory yields results for the total energies and ionization
energies of atoms, and for the shell structure in the atomic radial density
profiles that are in very good agreement with calculations using the full
Kohn-Sham theory.Comment: To be published in Phys. Rev.
Selective interlayer ferromagnetic coupling between the Cu spins in YBa Cu O grown on top of La Ca MnO
Studies to date on ferromagnet/d-wave superconductor heterostructures focus
mainly on the effects at or near the interfaces while the response of bulk
properties to heterostructuring is overlooked. Here we use resonant soft x-ray
scattering spectroscopy to reveal a novel c-axis ferromagnetic coupling between
the in-plane Cu spins in YBa Cu O (YBCO) superconductor when it
is grown on top of ferromagnetic La Ca MnO (LCMO) manganite
layer. This coupling, present in both normal and superconducting states of
YBCO, is sensitive to the interfacial termination such that it is only observed
in bilayers with MnO_2but not with La Ca interfacial
termination. Such contrasting behaviors, we propose, are due to distinct
energetic of CuO chain and CuO plane at the La Ca and
MnO terminated interfaces respectively, therefore influencing the transfer
of spin-polarized electrons from manganite to cuprate differently. Our findings
suggest that the superconducting/ferromagnetic bilayers with proper interfacial
engineering can be good candidates for searching the theorized
Fulde-Ferrel-Larkin-Ovchinnikov (FFLO) state in cuprates and studying the
competing quantum orders in highly correlated electron systems.Comment: Please note the change of the title. Text might be slightly different
from the published versio
The tensor structure on the representation category of the triplet algebra
We study the braided monoidal structure that the fusion product induces on
the abelian category -mod, the category of representations of
the triplet -algebra . The -algebras are a
family of vertex operator algebras that form the simplest known examples of
symmetry algebras of logarithmic conformal field theories. We formalise the
methods for computing fusion products, developed by Nahm, Gaberdiel and Kausch,
that are widely used in the physics literature and illustrate a systematic
approach to calculating fusion products in non-semi-simple representation
categories. We apply these methods to the braided monoidal structure of
-mod, previously constructed by Huang, Lepowsky and Zhang, to
prove that this braided monoidal structure is rigid. The rigidity of
-mod allows us to prove explicit formulae for the fusion product
on the set of all simple and all projective -modules, which were
first conjectured by Fuchs, Hwang, Semikhatov and Tipunin; and Gaberdiel and
Runkel.Comment: 58 pages; edit: added references and revisions according to referee
reports. Version to appear on J. Phys.
Topological Surface States and Dirac point tuning in ternary Bi2Te2Se class of topological insulators
Using angle-resolved photoemission spectroscopy, we report electronic
structure for representative members of ternary topological insulators. We show
that several members of this family, such as Bi2Se2Te, Bi2Te2Se, and GeBi2Te4,
exhibit a singly degenerate Dirac-like surface state, while Bi2Se2S is a fully
gapped insulator with no measurable surface state. One of these compounds,
Bi2Se2Te, shows tunable surface state dispersion upon its electronic alloying
with Sb (SbxBi2-xSe2Te series). Other members of the ternary family such as
GeBi2Te4 and BiTe1.5S1.5 show an in-gap surface Dirac point, the former of
which has been predicted to show nonzero weak topological invariants such as
(1;111); thus belonging to a different topological class than BiTe1.5S1.5. The
measured band structure presented here will be a valuable guide for
interpreting transport, thermoelectric, and thermopower measurements on these
compounds. The unique surface band topology observed in these compounds
contributes towards identifying designer materials with desired flexibility
needed for thermoelectric and spintronic device fabrication.Comment: 9 pages, 6 figures; Related results at
http://online.kitp.ucsb.edu/online/topomat11/hasan
Measurement of 8-Oxo-7, 8-Dihydro-2\u27 Deoxyguanosine in Human Semen and Urine by Isotope-Dilution Liquid Chromatography-Tandem Mass Spectrometry with On-Line Solid Phase Extraction: Comparison with a Commercial Available Enzyme-Linked Immunosorbent Assay
This study aimed to assess the correlation between 8-oxo-7,8-dihydro-2’-deoxyguanosine (8-oxo-dGuo) in semen and urine, and to compare the analytical methods of the isotope-diluted liquid chromatograph-tandem mass spectrometry (LC-MS/MS) coupled with an on-line Solid-Phase Extraction (SPE) and commercial Enzyme- Linked Immunosorbent Assay (ELISA) used for detecting 8-oxo-dGuo as an oxidative DNA damage marker. Semen and urine samples were simultaneously collected from 85 apparently healthy human subjects. An optimized DNA extraction method was employed to extract DNA from sperm while minimizing oxidation of DNA. All of the biological samples were analyzed by LC-MS/MS and ELISA. All of the biological samples were detected with 8-oxodGuo. ELISA consistently detected two to three times higher 8-oxodGuo levels in urine samples than LC-MS/MS. However, there was no significant correlation between measurements of 8-oxo-dGuo levels in urine and semen. In conclusion, the LC-MS/MS coupled with an SPE was a sensitive method to detect and quantify 8-oxo-dGuo in human sperm and urine. Urinary 8-oxo-dGuo may not be a reliable marker for detecting oxidatively damaged DNA in sperm
Surface electronic structure of a topological Kondo insulator candidate SmB6: insights from high-resolution ARPES
The Kondo insulator SmB6 has long been known to exhibit low temperature (T <
10K) transport anomaly and has recently attracted attention as a new
topological insulator candidate. By combining low-temperature and high
energy-momentum resolution of the laser-based ARPES technique, for the first
time, we probe the surface electronic structure of the anomalous conductivity
regime. We observe that the bulk bands exhibit a Kondo gap of 14 meV and
identify in-gap low-lying states within a 4 meV window of the Fermi level on
the (001)-surface of this material. The low-lying states are found to form
electron-like Fermi surface pockets that enclose the X and the Gamma points of
the surface Brillouin zone. These states disappear as temperature is raised
above 15K in correspondence with the complete disappearance of the 2D
conductivity channels in SmB6. While the topological nature of the in-gap
metallic states cannot be ascertained without spin (spin-texture) measurements
our bulk and surface measurements carried out in the
transport-anomaly-temperature regime (T < 10K) are consistent with the
first-principle predicted Fermi surface behavior of a topological Kondo
insulator phase in this material.Comment: 4 Figures, 6 Page
- …