Photonic crystal fiber with a hybrid honeycomb cladding

We consider an air-silica honeycomb lattice and demonstrate a new approach to the formation of a core defect. Typically, a high or low-index core is formed by adding a high-index region or an additional air-hole (or other low-index material) to the lattice, but here we discuss how a core defect can be formed by manipulating the cladding region rather than the core region itself. Germanium-doping of the honeycomb lattice has recently been suggested for the formation of a photonic band-gap guiding silica-core and here we experimentally demonstrate how an index-guiding silica-core can be formed by fluorine-doping of the honeycomb lattice.Comment: 5 pages including 3 figures. Accepted for Optics Expres

Investigations of lubricant rheology as applied to elastohydrodynamic lubrication

The pressure viscometer was modified to permit the measurement of viscosity at elevated pressures and shear stresses up to 5 x 10 to the 6th power N/sq m (720 psi). This shear stress is within a factor of three of the shear stress occurring in a sliding ehd point contact such as occurs in the ehd simulator. Viscosity data were taken on five lubricant samples, and it was found that viscous heating effects on the viscosity were predominant and not non-Newtonian behavior at the high shear stresses. The development of the infrared temperature measuring technique for the ehd simulator was completed, and temperature data for a set of operating conditions and one lubricant are reported. The numerical analysis of the behavior of nonlinear lubricants in the lubrication of rollers is reported

Covariant q-differential operators and unitary highest weight representations for U_q su(n,n)

We investigate a one-parameter family of quantum Harish-Chandra modules of U_q sl(2n). This family is an analog of the holomorphic discrete series of representations of the group SU(n,n) for the quantum group U_q su(n, n). We introduce a q-analog of "the wave" operator (a determinant-type differential operator) and prove certain covariance property of its powers. This result is applied to the study of some quotients of the above-mentioned quantum Harish-Chandra modules. We also prove an analog of a known result by J.Faraut and A.Koranyi on the expansion of reproducing kernels which determines the analytic continuation of the holomorphic discrete series.Comment: 26 page

Frequency Dependent Specific Heat from Thermal Effusion in Spherical Geometry

We present a novel method of measuring the frequency dependent specific heat at the glass transition applied to 5-polyphenyl-4-ether. The method employs thermal waves effusing radially out from the surface of a spherical thermistor that acts as both a heat generator and thermometer. It is a merit of the method compared to planar effusion methods that the influence of the mechanical boundary conditions are analytically known. This implies that it is the longitudinal rather than the isobaric specific heat that is measured. As another merit the thermal conductivity and specific heat can be found independently. The method has highest sensitivity at a frequency where the thermal diffusion length is comparable to the radius of the heat generator. This limits in practise the frequency range to 2-3 decades. An account of the 3omega-technique used including higher order terms in the temperature dependency of the thermistor and in the power generated is furthermore given.Comment: 17 pages, 15 figures, Substantially revised versio

Convergence of a semi-discretization scheme for the Hamilton--Jacobi equation: a new approach with the adjoint method

We consider a numerical scheme for the one dimensional time dependent Hamilton--Jacobi equation in the periodic setting. This scheme consists in a semi-discretization using monotone approximations of the Hamiltonian in the spacial variable. From classical viscosity solution theory, these schemes are known to converge. In this paper we present a new approach to the study of the rate of convergence of the approximations based on the nonlinear adjoint method recently introduced by L. C. Evans. We estimate the rate of convergence for convex Hamiltonians and recover the O(sqrt{h}) convergence rate in terms of the L^infty norm and O(h) in terms of the L^1 norm, where h is the size of the spacial grid. We discuss also possible generalizations to higher dimensional problems and present several other additional estimates. The special case of quadratic Hamiltonians is considered in detail in the end of the paper

Developing a Pilot Case and Modelling the Development of a Large European CO₂ Transport Infrastructure -The GATEWAY H2020 Project

The H2020 GATEWAY project aims to develop a comprehensive model Pilot Case which, intentionally, will pave the ground for CCS deployment in Europe. It will result from the assessment of, technical, commercial, judicial and societal issues related to a future CO2 transport infrastructure. The Pilot Case derived on this basis, will emphasize a gateway for CO2 transport in the North Sea Basin. Four potential pilot cases have been evaluated through a combination of techno-economic modelling of the individual cases and evaluation against more qualitative criteria. The chosen Pilot Case, Rotterdam Nucleus, will be refined and developed during the remaining period of the GATEWAY project. To maximise impact, the GATEWAY project adapts its work to lay the foundation for a future application to a European ‘Project of Common Interest’ (PCI). Continuous dialogue with the most relevant stakeholders is an important part of GATEWAY, as a Coordination and Support Action (CSA) H2020 project

Harmonizing Software Standards with a Semantic Model

The application of standards in the software development process supports interoperability between systems. Maintenance of standards must be guaranteed on the organisational and technical level. The use of semantic technologies can contribute to the standard maintenance process by providing a harmonizing bridge between standards of different knowledge domains and languages and by providing a single point of administration for standard domain concepts. This paper describes a case study of the creation of a semantic layer between software standards for water management systems in The Netherland