77 research outputs found

    Critically coupled silicon Fabry-Perot photodetectors based on the internal photoemission effect at 1550 nm

    Get PDF
    In this paper, design, fabrication and characterization of an all-silicon photodetector (PD) at 1550 nm, have been reported. Our device is a surface-illuminated PD constituted by a Fabry-Perot microcavity incorporating a Cu/p-Si Schottky diode. Its absorption mechanism, based on the internal photoemission effect (IPE), has been enhanced by critical coupling condition. Our experimental findings prove a peak responsivity of 0.063 mA/W, which is the highest value obtained in a surface-illuminated IPE-based Si PD around 1550 nm. Finally, device capacitance measurements have been carried out demonstrating a capacitance < 5 pF which has the potential for GHz operation subject to a reduction of the series resistance of the ohmic contact

    DEDALO: Application of structural health monitoring systems on UHTC structures

    Get PDF
    In aerospace applications the development of a reliable method of structural health monitoring (SHM) is one of the most important keys in maintaining the integrity and safety of structures, preventing catastrophic failure. The research program DEDALO aims at developing a real size UHTC-based prototype with a complex shape equipped with a SHM system for damage detection. A multidisciplinary approach has been adopted involving mechanical design, materials science, manufacturing processes and development of optical devices to detect strain and temperature on the as-produced UHTC articles. Former activities merged into the manufacturing of a prototype hot structure supplied with optical sensing nodes to perform a functional test at high temperature. This communication describes the preliminary findings of the project. A series of ZrB2-SiC based compositions was studied adjusting type, concentration and granulometry of reinforcing phases and additives to further identify the optimal composition for the hot structure. The pressureless sintering technique was selected privileging a near-net-shape approach to reduce the manufacturing costs. A SHM system was developed using commercial high temperature Fiber optic Bragg Grating (FBG), for thermal monitoring, and custom silica-sapphire fiber optic strain sensor, based on Fabry-P?rot configuration, allowing simultaneous and real time measurement of temperature and structural loads applied on the structure under investigation. A ceramic flexible structure was developed to ease sensor installation procedure on complex shape test articles. The fiber optic sensors interrogation system was developed based on a tunable laser source. Thermal and mechanical tests showed sensor robustness at high temperature and 0,6 &#956;-epsilon as accuracy on strain measurement up to 800?C. Tile-shaped hot structures were manufactured, equipped with the prototype Structural Health Monitoring System (SHMS) and functionally tested at high temperature. The project will undergo a second iterative loop which foresees investigation on the final test article: a ZrB2-SiC based composite hollow ti

    silicon based technology for ligand receptor molecular identification

    Get PDF
    One of the most important goals in the fields of biology and medicine is the possibility to dispose of efficient tools for the characterization of the extraordinary complexity of ligand-receptor interactions. To approach this theme, we explored the use of crystalline silicon (cSi) technology for the realization of a biotechnological device in which the ligand-receptor interactions are revealed by means of optical measurements. Here, we describe a chemical procedure for the functionalization of microwell etched on silicon wafers, and the subsequent anchoring of biological molecules like an antibody anti-A20 murine lymphoma cell line. The optical analysis of the interaction on the biochips between the bound biomolecule and their corresponding ligand indicated that the functionalized cSi is suitable for this application

    Bioengineered Surfaces for Real-Time Label-Free Detection of Cancer Cells

    Get PDF
    Biosensing technology is an advancing field that benefits from the properties of biological processes combined to functional materials. Recently, biosensors have emerged as essential tools in biomedical applications, offering advantages over conventional clinical techniques for diagnosis and therapy. Optical biosensors provide fast, selective, direct, and cost-effective analyses allowing label-free and real-time tests. They have also shown exceptional potential for integration in lab-on-a-chip (LOC) devices. The major challenge in the biosensor field is to achieve a fully operative LOC platform that can be used in any place at any time. The choice of an appropriate strategy to immobilize the biological element on the sensor surface becomes the key factor to obtain an applicable analytical tool. In this chapter, after a brief description of the main biofunctionalization procedures on silicon devices, two silicon-based chips that present an (i) IgG antibody or (ii) an Id-peptide as molecular probe, directed against the B-cell receptor of lymphoma cancer cells, will be presented. From a comparison in detecting cells, the Id-peptide device was able to detect lymphoma cells also at low cell concentrations (8.5 × 10−3 cells/μm2) and in the presence of a large amount of non-specific cells. This recognition strategy could represent a proof-of-concept for an innovative tool for the targeting of patient-specific neoplastic B cells during the minimal residual disease; in addition, it represents an encouraging starting point for the construction of a lab-on-a-chip system for the specific recognition of neoplastic cells in biological fluids enabling the follow-up of the changes of cancer cells number in patients, highly demanded for therapy monitoring applications

    Metasurface based on cross-shaped plasmonic nanoantennas as chemical sensor for surface-enhanced infrared absorption spectroscopy

    Get PDF
    Infrared spectroscopy is an effective technique extensively used in research and industry for the label-free and unambiguous identification of molecular species. However, the sensitivity of this technique is severely limited as a result of Beer's law and, the small infrared absorption cross-section that make prohibitively weak the absorption signals, of minute amounts of analyte as those present in monolayers. This limitation can be overcome by enhancing the infrared vibration of molecules through the enhancement of the electromagnetic (EM) field. Surface Enhanced InfraRed Absorption (SEIRA) using resonant metal Nano-scale Antennas (NAs) can provide huge electromagnetic fields on the nanometer scale featuring localized collective oscillations of electrons, an effect named Localized Surface Plasmonic Resonances (LSPRsWe here report on a series of 2D arrays of cross-shaped NAs having several mm 2 area coverage (metasurface) as SEIRA optimized antennas, which can be used in practical applications such as the vibrational sensing of chemical and biological analytes. Cross-shape designed NAs are insensitive to the polarization of the electromagnetic radiation impinging the active area. Due to the random orientation of the dipole moments of molecules they are particularly suitable for the construction of bio-molecular sensors. At the same time, the 2D-array configuration ensures a good near-field signal enhancement arising from the coupling between neighbour NAs Moreover, SEIRA NAs can be easily integrated with micrometre-sized channels and be suitable for the high sensitivity, real time analysis of IR emitting samples, in matrices where IR spectroscopy is severely limited due to absorption bands of liquid water. We present the design, fabrication and experimental characterization of large-area metasurfaces based on cross-shaped plasmonic NAs for the spectroscopic characterization of various types of compounds and for sensing applications in the mid-infrared range. The cross-shaped NAs we have designed exhibit SEIRA phenomena which are very sensitive to both refractive index changes in the surrounding medium and to the specific molecular vibration band emerging from surface adsorbed molecules. To test this effect on our device, we have used as model compounds small molecules (molecular weight (MW) &lt; 500 g/mol) containing triple bond groups resonating at about 2100 cm −1 and a large polymer (MW ˜ 950,000 g/mol) containing carbonyl groups resonating at wavenumbers of about 1700 cm −1 . We show a sensitivity of 600 nm/RIU at different wavelengths at a maximum amount of immobilized small molecule of 0.7 fmoles and a SEIRA enhancement factor of 48,000. We also show the device potential to reveal chemical reactions, occurring on the sensor surface at the same scale, where the nitrile group is converted to a triazole ring

    Bound-state in the continuum of a photonic crystal metasurface: a platform for ultrasensitive sensing and near field amplification

    Get PDF
    Abstract The localization of the electromagnetic field at the nanoscale can play a key role in many applications, such as sensing, spectroscopy and energy conversion. In the last years, great efforts have been performed to study and realize all-dielectric loss-free nanostructures to confine the radiation without the limits imposed by the plasmonic systems. Here we demonstrate that the field enhancement in proximity of a photonic crystal metasurface supporting bound states in the continuum can be explored to boost the light-matter interaction. We design and realize an innovative sensing scheme for bulk and surface measurement with ultra-high figure of merit and apply this new configuration for studying a specific protein-protein interaction. The recognition scheme can be coupled to a fluorescence-based sensing approach, which exploits the capability of the sensor to strongly enhance fluorescence signals. Our results provide new solutions for light manipulation at the nanoscale, especially for sensing and nonlinear optics applications
    corecore