Substituent position-induced color tunability in polymer light-emitting diodes

We report substituent position-induced color tunability in polymer light-emitting diodes fabricated with poly[2-{2- or 3- or 4-[(3,7-dimethyloctyl)oxy] phenyoxy}-1,4-phenylenevinylene] (DMOPPPV). When the position of the substituent in DMOP-PPV moves to the ortho, meta, and para sites, the corresponding photo- and electroluminescence spectra shift their peaks to a longer wavelength of about 540, 560, and 585 nm, respectively. We ascribe this to the different degree of steric effect in the backbone for each substituent position. As the substituent position is closer to the main chain, the planarity of the backbone is less conserved, thereby reducing the effective conjugated length of the main chain and broadening the pi-pi(*) energy gapopen6

Association analysis of polymorphism in KIAA1717, HUMMLC2B, DECR1 and FTO genes with meat quality traits of the Berkshire breed

Single nucleotide polymorphisms (SNPs) in KIAA1717, HUMMLC2B, DECR1, and FTO genes have been found to be associated with some pork meat quality traits. In this study, we discovered that, in addition to meat quality traits reported previously, SNPs in these genes also are significantly associated with other meat quality traits in the Berkshire breed. A total of 323 Berkshire pigs bred under the same conditions were used for meat quality evaluation and polymerase chain reaction-amplified genes with restriction endonucleases (PCR-RFLP) genotyping analyses. The association analysis of RFLP genotyping with meat quality traits revealed that the SNPs in these 4 genes have novel associations with multiple meat quality traits (p < 0.01 or p < 0.05); a SNP in KIAA1717 was associated with meat color (CIE L), backfat thickness, drip loss, water-holding capacity, and pH24hr; a SNP in HUMMLC2B was associated with chemical composition (collagen), drip loss, shear force, and pH24hr; a SNP in DECR1 was associated with meat color (CIE a and b) and backfat thickness; and a SNP in FTO was associated with meat color (CIE L, a and b), protein content, drip loss, and water-holding capacity. Taken collectively, our results suggest that these 4 SNPs may be used for marker-assisted selection as a genetic marker for meat quality traits in Berkshire pigs.Key words: Berkshire, genetic markers, meat quality, SN

Growth inhibition of thyroid follicular cell-derived cancers by the opioid growth factor (OGF) - opioid growth factor receptor (OGFr) axis

<p>Abstract</p> <p>Background</p> <p>Carcinoma of the thyroid gland is an uncommon cancer, but the most frequent malignancy of the endocrine system. Most thyroid cancers are derived from the follicular cell. Follicular carcinoma (FTC) is considered more malignant than papillary thyroid carcinoma (PTC), and anaplastic thyroid cancer (ATC) is one of the most lethal human cancers. Opioid Growth Factor (OGF; chemical term - [Met⁵]-enkephalin) and its receptor, OGFr, form an inhibitory axis regulating cell proliferation. Both the peptide and receptor have been detected in a wide variety of cancers, and OGF is currently used clinically as a biotherapy for some non-thyroid neoplasias. This study addressed the question of whether the OGF-OGFr axis is present and functional in human thyroid follicular cell - derived cancer.</p> <p>Methods</p> <p>Utilizing human ATC (KAT-18), PTC (KTC-1), and FTC (WRO 82-1) cell lines, immunohistochemistry was employed to ascertain the presence and location of OGF and OGFr. The growth characteristics in the presence of OGF or the opioid antagonist naltrexone (NTX), and the specificity of opioid peptides for proliferation of ATC, were established in KAT-18 cells. Dependence on peptide and receptor were investigated using neutralization studies with antibodies and siRNA experiments, respectively. The mechanism of peptide action on DNA synthesis and cell survival was ascertained. The ubiquity of the OGF-OGFr axis in thyroid follicular cell-derived cancer was assessed in KTC-1 (PTC) and WRO 82-1 (FTC) tumor cells.</p> <p>Results</p> <p>OGF and OGFr were present in KAT-18 cells. Concentrations of 10^-6M OGF inhibited cell replication up to 30%, whereas NTX increased cell growth up to 35% relative to cultures treated with sterile water. OGF treatment reduced cell number by as much as 38% in KAT-18 ATC in a dose-dependent and receptor-mediated manner. OGF antibodies neutralized the inhibitory effects of OGF, and siRNA knockdown of OGFr negated growth inhibition by OGF. Cell survival was not altered by OGF, but DNA synthesis as recorded by BrdU incorporation was depressed by 28% in OGF-treated cultures compared to those exposed to sterile water. The OGF-OGFr axis was detected and functional in PTC (KTC-1) and FTC (WRO 82-1) cell lines.</p> <p>Conclusion</p> <p>These data suggest that OGF and OGFr are present in follicular-derived thyroid cancers, and that OGF serves in a tonically active inhibitory manner to maintain homeostasis of cell proliferation. These results may provide a biotherapeutic strategy in the treatment of these cancers.</p

Iron content in forage sorghum (Sorghum bicolor (L.) Moench) measured on different slit widths with atomic absorption spectrometry

Our objective was to know the right slit width for iron (Fe) concentration of forage sorghum, sorghum hybrid (Sorghum bicolor (L.) Moench), and also to discern which water treatment sludge (WTS) were good for ruminant's health with the feeding sorghum on the present study. The present experiment was carried out on a randomized block design with four treatments; Control, alum sludge compost, alum sludge + NPK (nitrogen, phosphorus, potassium fertilizers), alum sludge compost + NPK (nitrogen, phosphorus, potassium fertilizers). Sorghum hybrid was harvested, and iron content of it was analyzed with an atomic absorption spectrophotometer on background correction (BGC) mode. In order to analyze the iron (Fe) content of the sorghum with the spectrophotometer, three different slit widths conditions were used; 0.15, 0.20 and 0.25 nm. Absorbance and background values were obtained during the Fe analyses with the apparatus. When the background value is small, it is preferred for some trace metals’ analyses. Both (AM/BS) ratio (mean of the absorbance values&lt;AM&gt; to the standard deviation of back ground values&lt;BS&gt;) and (AS&lt;standard deviation of the absorbance values&gt;/BS) ratio, were larger on 0.25 nm slit than those on 0.15 and 0.20 nm slit, and, from our experiment, the condition seemed better on the 0.25 nm slit for the iron analysis with the spectrophotometer. Therefore, the sorghum hybrid grown on (Alum+NPK) and on (Compost only) might be dangerous for ruminants because of their higher values than 200 mg Fe/kg DM (dry matter).Key words: Absorbance, alum sludge, atomic absorption spectrophotometer, background, forage sorghum hybrid, iron, slit

Hydrogen production affected by Pt concentration on TiO <inf>2</inf> produced from the incineration of dye wastewater flocculated sludge using titanium tetrachloride

TiO 2 from the incineration of dye wastewater flocculated sludge using TiCl 4 coagulant was produced. Optimal catalyst amount and Pt-loading on TiO 2 were studied for the production of H 2 by photocatalytic reforming of methanol (6% vol.). On the other hand, BTSE (biologically treated sewage effluent) was flocculated using TiCl4 and produced sludge was incinerated to generate TiO 2 . TiO 2 was loaded with optimum Pt and added to the supernatant in a photocatalytic reactor to test the efficiency of using remaining organics as a “sacrificial reagent” for photocatalytic hydrogen production. Dissolved organic carbon (DOC) and molecular weight distribution (MWD) were measured for nanofiltration (NF) and TiCl 4 flocculation followed by photocatalysis. TiO 2 (from the incineration of BTSE flocculated sludge using TiCl4) was produced and loaded with 0.5% Pt. Results showed that the optimum concentration of TiO 2 (from dye wastewater) for H 2 production was 0.3 g/L, while the optimum amount of Pt was 0.5%. DOC and MWD removal was similar for the flocculation of BTSE followed by photocatalytic reaction and the NF process. Remaining organic compounds after flocculation could not be used as sacrificial reagent to induce H 2 production. Further investigations on studying the UV intensity and/or identifying organic/inorganic scavengers to inhibit H 2 production are underway. © 2010, Taylor & Francis Group, LLC

A comparative study on the marginal fit of zirconia cores manufactured by CAD/CAM and copy milling methods

Purpose: The marginal fit of zirconia cores that were produced by CAD/CAM and by copy milling systems was compared and analyzed to confirm the significance of the variation in dental technicians skill between the two systems.Materials and Methods: Using dental resin teeth and individual trays, 30 plaster casts were produced. Fifteen casts were assigned to be used with five different zirconia core manufacturing dental laboratories using the same CAD/CAM system, which were designated as the CC group. The remaining 15 were assigned to be used with five different zirconia core manufacturing dental laboratories using also the same copy milling system and were designated as the CM group. The zirconia cores were fabricated and were cemented onto the casts. The vertical marginal opening was measured under an optical microscope at 75x magnification. The measured vertical marginal discrepancies were analyzed using an independent sample t-test, and the significance of the vertical marginal gap value for each dental laboratory was analyzed by performing the Kruskal-Wallis test.Results: The means and standard deviations for the marginal discrepancies of the CC and CM groups were found to be 102.73 ± 29.73 μm and 82.25 ± 22.37 μm, respectively. The independent sample t-test showed a significant difference between the two systems; the CAD/CAM system showed a larger vertical marginal gap than the copy milling system. The Kruskal-Wallis test indicated that no significant distributional differences were found between the dental laboratories in either the CAD/CAM or the copy milling systems.Conclusions: The copy milling system may produce more accurate zirconia restorations than the CAD/CAM system. The technicians skill of a copy milling system may not be a determining factor influencing the accuracy of a single zirconia core.Purpose: The marginal fit of zirconia cores that were produced by CAD/CAM and by copy milling systems was compared and analyzed to confirm the significance of the variation in dental technicians skill between the two systems. Materials and Methods: Using dental resin teeth and individual trays, 30 plaster casts were produced. Fifteen casts were assigned to be used with five different zirconia core manufacturing dental laboratories using the same CAD/CAM system, which were designated as the CC group. The remaining 15 were assigned to be used with five different zirconia core manufacturing dental laboratories using also the same copy milling system and were designated as the CM group. The zirconia cores were fabricated and were cemented onto the casts. The vertical marginal opening was measured under an optical microscope at 75x magnification. The measured vertical marginal discrepancies were analyzed using an independent sample t-test, and the significance of the vertical marginal gap value for each dental laboratory was analyzed by performing the Kruskal-Wallis test. Results: The means and standard deviations for the marginal discrepancies of the CC and CM groups were found to be 102.73 ± 29.73 µm and 82.25 ± 22.37 µm, respectively. The independent sample t-test showed a significant difference between the two systems; the CAD/CAM system showed a larger vertical marginal gap than the copy milling system. The Kruskal-Wallis test indicated that no significant distributional differences were found between the dental laboratories in either the CAD/CAM or the copy milling systems. Conclusions: The copy milling system may produce more accurate zirconia restorations than the CAD/CAM system. The technicians skill of a copy milling system may not be a determining factor influencing the accuracy of a single zirconia core.OAIID:oai:osos.snu.ac.kr:snu2013-01/102/2008003883/14SEQ:14PERF_CD:SNU2013-01EVAL_ITEM_CD:102USER_ID:2008003883ADJUST_YN:NEMP_ID:A078517DEPT_CD:861CITE_RATE:0FILENAME:dentistry 201311 3 163.pdfDEPT_NM:치의학과EMAIL:[email protected]_YN:NCONFIRM:

Bethe Ansatz solutions for highest states in N=4{\cal N}=4 SYM and AdS/CFT duality

We consider the operators with highest anomalous dimension $\Delta$ in the compact rank-one sectors $\mathfrak{su}(1|1)$ and $\mathfrak{su}(2)$ of ${\cal N}=4$ super Yang-Mills. We study the flow of $\Delta$ from weak to strong 't Hooft coupling $\lambda$ by solving (i) the all-loop gauge Bethe Ansatz, (ii) the quantum string Bethe Ansatz. The two calculations are carefully compared in the strong coupling limit and exhibit different exponents $\nu$ in the leading order expansion $\Delta\sim \lambda^{\nu}$. We find $\nu = 1/2$ and $\nu = 1/4$ for the gauge or string solution. This strong coupling discrepancy is not unexpected, and it provides an explicit example where the gauge Bethe Ansatz solution cannot be trusted at large $\lambda$. Instead, the string solution perfectly reproduces the Gubser-Klebanov-Polyakov law $\Delta = 2\sqrt{n} \lambda^{1/4}$. In particular, we provide an analytic expression for the integer level $n$ as a function of the U(1) charge in both sectors.Comment: 42 pages, JHEP style LaTe

Anesthesia of Epinephelus marginatus with essential oil of Aloysia polystachya: an approach on blood parameters

This study investigated the anesthetic potential of the essential oil (EO) of Aloysia polystachya in juveniles of dusky grouper (Epinephelus marginatus). Fish were exposed to different concentrations of EO of A. polystachya to evaluate time of induction and recovery from anesthesia. In the second experiment, fish were divided into four groups: control, ethanol and 50 or 300 mu L L-1 EO of A. polystachya, and each group was submitted to induction for 3.5 min and recovery for 5 or 10 min. The blood gases and glucose levels showed alterations as a function of the recovery times, but Na+ and K+ levels did not show any alteration. In conclusion, the EO from leaves of A. polystachya is an effective anesthetic for dusky grouper, because anesthesia was reached within the recommended time at EO concentrations of 300 and 400 mu L L-1. However, most evaluated blood parameters showed compensatory responses due to EO exposure.Fundacao de Amparo a Pesquisa do Estado do Rio Grande do Sul/Programa de Apoio a Nucleos de Excelencia (FAPERGS/PRONEX) [10/0016-8]; Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) [470964/2009-0]; Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior, Brazil (CAPES)info:eu-repo/semantics/publishedVersio

Collider and Dark Matter Searches in Models with Mixed Modulus-Anomaly Mediated SUSY Breaking

We investigate the phenomenology of supersymmetric models where moduli fields and the Weyl anomaly make comparable contributions to SUSY breaking effects in the observable sector of fields. This mixed modulus-anomaly mediated supersymmetry breaking (MM-AMSB) scenario is inspired by models of string compactification with fluxes, which have been shown to yield a de Sitter vacuum (as in the recent construction by Kachru {\it et al}). The phenomenology depends on the so-called modular weights which, in turn, depend on the location of various fields in the extra dimensions. We find that the model with zero modular weights gives mass spectra characterized by very light top squarks and/or tau sleptons, or where M_1\sim -M_2 so that the bino and wino are approximately degenerate. The top squark mass can be in the range required by successful electroweak baryogenesis. The measured relic density of cold dark matter can be obtained via top squark co-annihilation at low \tan\beta, tau slepton co-annihilation at large \tan\beta or via bino-wino coannihilation. Then, we typically find low rates for direct and indirect detection of neutralino dark matter. However, essentially all the WMAP-allowed parameter space can be probed by experiments at the CERN LHC, while significant portions may also be explored at an e^+e^- collider with \sqrt{s}=0.5--1 TeV. We also investigate a case with non-zero modular weights. In this case, co-annihilation, A-funnel annihilation and bulk annihilation of neutralinos are all allowed. Results for future colliders are qualitatively similar, but prospects for indirect dark matter searches via gamma rays and anti-particles are somewhat better.Comment: 38 pages including 22 EPS figures; latest version posted to conform with published versio