Incidence of cleft lip and palate in Gorgan - Northern Iran: An epidemiological study

Objective: Cleft lip with or without cleft palate is the most common orofacial congenital anomaly among live births. This study was carried out to determine the incidence rate of oral clefting in Gorgan, Northern Iran during 2004-2009. Methods: This descriptive hospital-based study was performed on 35,009 live newborns in Dezyani Hospital in Gorgan, Northern Iran during 2004-2009. All newborns were screened for oral clefts. Data including birth date, gender, type of oral clefts, parents' consanguinity, parental ethnicity and presence of other congenital anomalies were recorded for analysis. Result: The overall incidence rate of oral clefts during this 6-year period was 1.05 per 1000, or 1 per 946 live births. The incidence of cleft lip and isolated cleft palate was 0.08 and 0.37 per 1,000 live births, respectively. The ratio for different cleft types was 1:7:4 (CL: CLP: CP). The incidence of oral clefting was 1.2 per 1,000 male births and 0.86 per 1,000 female births (RR=1.40; 95% CI: 0.73-2.71). According to parental ethnicity, the incidence of oral clefting was 0.7, 1.7 and 1.26 per 1,000 in Native Fars, Turkman and Sistani, respectively. The relative risk for oral clefting in Turkman to native Fars group was 2.56 (p<0.02). In this study, 56.7% of clefts were CL+P, 8.1% were CL and 35.1% of cases were CP. CP was more common among girls (54%) than among boys (46%) but CL was more common among boys. Conclusion: The results showed that the incidence of oral clefts in the study population as being 1.05 per 1,000 live births, which has increased from 0.97 per 1,000 live births reported in an earlier study in this area. © OMSB, 2012

On the identification of Ti-Ta-Nb-oxides in “wiikites” from Karelia

Purpose. With respect to the nature of Ti-Ta-Nb-oxides, which are included in the mineral associations that have historically gone by the now outdated name of “wiikites”, there is no unanimity of opinion. The main difficulty in identifying them is associated with the complexity of their chemical composition, their metamict structure and the substantial changes in their initial mineral form due to the effects of natural weathering. The aim of this work is the development of methodology to identify Ti-Ta-Nb-oxides corresponding to the mineral formulas AB2O6 and A2B2O7. Methods. The methodology developed in the work includes two experimental approaches: 1) electron probe microanalysis of phases revealed through use of the SEM-BSE method. Based on the resulting data, a hypothesis about the nature of the Ti-Ta-Nb-oxides in a number of wiikite samples is proposed. 2) XRD analysis of those phases that are formed in the course of thermal annealing of samples from 200 to 1000°C. Based on the resulting data here, the previous hypotheses are either accepted or rejected for each sample. Findings. Using this methodology, three “wiikite” samples were analyzed (the experimental codes were Wk-2, Wk-3 and Wk-7). The Ti-Ta-Nb-oxides in two of these wiikites (Wk-2 and Wk-3) were preliminarily determined to be hydroxyyttropyrochlore and hydroxycalciobetafite, respectively. In the third sample (Wk-7), the Ti-Ta-Nb-oxide was classified as polycrase. The results of XRD phase analysis of the annealed samples were compatible with the primary hypotheses that hydroxycalciobetafite and polycrase were the initial minerals in “wiikites” 3 and 7, respectively. Originality. The paper considers the issue of the chemical conditions necessary for the recovery of the original Ti-Ta-Nb-oxide during recrystallization of the metamict structures. This is a problem that has not been substantively addressed in the literature. Also for the first time experimentally proved the existence of the polycrase in “wiikites”. Practical implications. Completed work expands our knowledge of the mineral composition of the granitic pegmatites of the Baltic shield and the possibility of their use both for research purposes and for needs of national economy.Мета. Розробка методології ідентифікації Ti-Ta-Nb-оксидів складного хімічного складу з метаміктною структурою, що відповідають мінеральним формулами АВ2О6 та А2В2О7. Методика. Для розробки методології ідентифікації у роботі використано два експериментальних підходи: 1) рентген-спектральний мікроаналіз фаз, виявлених методом скануючої електронної мікроскопії зразків у назад відображених електронах. На основі отриманих результатів висунута гіпотеза щодо природи Ti-Ta-Nb-оксидів. 2) рентген-дифракційний аналіз фаз, що утворюються в процесі термічного відпалу зразків від 200 до 1000°С. На основі отриманих результатів для кожного зразка первинна гіпотеза приймалася або відкидалася. Результати. З використанням даної методики були вивчені три зразки “віікітів” (шифри зразків: Wk-2, Wk-3 і Wk-7). Наявність Ti-Ta-Nb-оксидів попередньо визначено e двох зразках (Wk-2 і Wk-3) відповідно, як гідроксііттропірохлор та гідроксікальціобетафіт. У третьому зразку (Wk-7) Ti-Ta-Nb діагностований як полікраз. Результати рентген-дифракційного аналізу відпалених зразків підтвердили гіпотези про те, що початковими мінералами у Wk-3 і Wk-7 були гідроксікальціобетафіт і полікраз відповідно. Наукова новизна. Визначено хімічні умови, необхідні для утворення початкового Тi-Ta-Nb під час рекристалізації метаміктної структури, що раніше не розглядалось у відповідній тематичній науковій літературі. Вперше експериментально виявлено присутність у “віікітах” полікраза. Практична значимість. Отримані результати розширюють й доповнюють знання щодо мінерального складу гранітних пегматитів Балтійського щита та надають можливість їх використання в дослідницьких цілях і потребах народного господарства.Цель. Разработка методологии идентификации Ti-Ta-Nb-оксидов сложного химического состава с метамиктной структурой, соответствующих минеральным формулам АВ2О6 и А2В2О7. Методика. Для разработки методологии идентификации в работе использовано два экспериментальных подхода: 1) рентген-спектральный микроанализ фаз, выявленных методом сканирующей электронной микроскопии образцов в обратно отраженных электронах. На основе полученных результатов выдвинута гипотеза о природе Ti-Ta-Nb-оксидов. 2) рентген-дифракционный анализ фаз, образующихся в процессе термического отжига образцов от 200 до 1000°С. На основе полученных результатов для каждого образца первоначальная гипотеза принималась или отвергалась. Результаты. С использованием данной методики были изучены три образца “виикитов” (шифры образцов: Wk-2, Wk-3 и Wk-7). Наличие Ti-Ta-Nb-оксидов предварительно определено в двух образцах (Wk-2 и Wk-3) соответственно, как гидроксииттропирохлор и гидроксикальциобетафит. В третьем образце (Wk-7) Ti-Ta-Nb диагностирован как поликраз. Результаты рентген-дифракционного анализа отожженных образцов подтвердили гипотезы о том, что первоначальными минералами в Wk-3 и Wk-7 были гидроксикальциобетафит и поликраз соответственно. Научная новизна. Определены химические условия, необходимые для образования первоначального Тi-Ta-Nb во время рекристаллизации метамиктной структуры, что ранее не рассматривалось в соответствующих тематических научных литературе. Впервые экспериментально выявлено присутствие в “виикитах” поликраза. Практическая значимость. Полученные результаты расширяют и дополняют знания о минеральном составе гранитных пегматитов Балтийского щита и дают возможности их использования в исследовательских целях и нуждах народного хозяйства.The study was conducted using equipment of the Center of X-ray Diffraction Studies and the Center for Microscopy and Microanalysis of the Research Park at Saint Petersburg State University, as well as the analytical laboratory of OJSC MMC Norilsk Nickel in Saint Petersburg

Biological survey of Chalcalburnus chalcoides guldenstadti spawning migration in Anzati Lagoon

Different biological forms of Chalcalburnus chalcoides, which is called sharnaya in Russian and saphidcooly in Persian, are distributed in the Caspian Sea, Aral Sea and Black Sea, The saphidcooly which live in the Caspian Sea scattered in the southern and western regions and enter the Kura and Terek Rivers in the northern coast for spawning (Berg. 1965). The Anzali lagoon saphidcooly is smaller in size compared with the Kura's population, but the results of this survey indicate that after maturation. The Anzali Lagoon saphidcooly show greater growth than the Kuras population. The migration for spawning to Anzali Lagoon commences in March with slow run, and reaches the peak in May and the beginning of June

Length frequency, sex ratio and relative abundance (CPUE) of Astacus leptodactylus in Arass Reservior (1997-98)

The length frequency, sex ratio and CPUE of Arass reservoir crayfish have been studied during a one year research project in 1997-98. Comparison of Arass crayfish with the same species of crayfish dwelling in freshwater habitats of Turkey, Turkamenistan, Caspian sea region and also in Anzali lagoon, The Arass crayfish were higher in length and weight. The average length and weight were 120.50±0.96mm and 54.68±1.53 gr, respectively (n=3219, confidence interval 95%). In the samples, the smallest crayfish measured 78mm and weighted 12.3 gr and the largest crayfish had 186mmlength and 239.6 gr weight. In the crayfish traps 83.2% of catch exceeded the standard commercial size. The sex ratio during spawning period (December-May) dominated by males and in other months the females had superiority in the catch. In general consideration the sex ratio during the project life dominated by males (1:1.33, n=35454). The CPUE in August was the highest and the least in January (in order of 10.32 and 0.15 crayfish per one trap in 24 hours respectively). The catching operation occured in the depth of 2.5-17.5m in the ecosystem, and CPUE were the highest the depth of 75m. Considering the CPUE data, the desirable catch occured in the August, September and October. Positive relationship between water temperature and CPUE observed, and optimum catch were occured when the water temperature ranged between 16-26ᵒC

A comparative study of proximate composition of Artemia urmiana enriched with different sources and levels of HUFA

The nutritional quality of commercially available Artemia strains is relatively poor in Eicosapentaenoic acid (EPA), Arachidonic acid (ARA) and especially Docosahexaenoic acid (DHA). Hence, it is essential and common practice to enrich this live prey with emulsions of special oils. One commercial ICES30/4 (Belgium), Linseed oil as a vegetable oil, Cod liver oil and Sturgeon ovary oil as two animal oils with EPA amounts in these oils were 6.29, 0.03, 11.39, 7.55 and the DHA amounts were 20.90, 0.00, 7.64, 2.76 respectively with three concentrations (100, 200 and 300ppm) during two enrichment periods (12 and 24h) were tested in order to improve the HUFA content, the DHA/EPA ratio and ARA content of Artemia urmiana nauplii. The results showed that Artemia enriched with different levels of vegetable oil and enrichment periods was poor in relation to either HUFA content or DHA/EPA ratio but the fish oils and emulsion resulted in HUFA incorporation. Sturgeon ovary oil caused the poorest DHA/EPA ratio enrichment (0.40 in 300ppm-24h) but the commercial emulsion (ICES30/4) was found as the best for DHA/EPA ratio enrichment (1.20 in 300 ppm- 24h). Cod liver oil (0.53 in 100ppm-24h) can be a good internal source substitute for improving the DHA/EPA ratio enrichment compared to ICES30/4 due to price and availability. As a result, HUFA content was increased with enrichment level 200ppm during 24h. Also, all oil sources improved lipid and protein percentages in A. urmiana nauplii

Effect of substrate grain size on structural and corrosion properties of electrodeposited nickel layer protected with self-assembled film of stearic acid

In the present study, the impact of copper substrate grain size on the structure of the succeeding electrodeposited nickel film and its consequent corrosion resistance in 3.5% NaCl medium were evaluated before and after functionalization with stearic acid. Nickel layers were electrodeposited on two different copper sheets with average grain size of 12 and 25 \u3bcm, followed by deposition of stearic acid film through self-assembly. X-ray diffraction analysis of the electrodeposited nickel films revealed that the deposition of nickel film on the Cu substrate with small (12 \u3bcm) and large (25 \u3bcm) grains is predominantly governed by growth in the (220) and (111) planes, respectively. Both electrodeposited films initially exhibited a hydrophilic nature, with water-contact angles of 56\ub0 and <10\ub0, respectively. After functionalization with stearic acid, superhydrophobic films with contact angles of ~150\ub0 were obtained on both samples. In a 3.5% NaCl medium, the corrosion resistance of the nickel layer electrodeposited on the copper substrate with 25 \u3bcm grains was three times greater than that deposited on the copper substrate with 12 \u3bcm grains. After functionalization, the corrosion resistance of both films was greatly improved in both short and long immersion times in 3.5% NaCl medium

Lipase Production in Tray-Bioreactor via Solid State Fermentation under Desired Growth Conditions

Lipase was produced under desired growth conditions in a novel tray bioreactor using the fungus strain of Rhizopus oryzae. Several agricultural residues/products including sugarcane bagasse, wheat bran, corn meal, barely bran and equal mixtures of sugarcane bagasse with agricultural residues were applied as solid substrate. Lipase produced from the pure sugarcane bagasse showed higher activities than other substrates; which resulted enzyme activities of 155.76 and 138.37 U/gds for the top and middle trays respectively. Furthermore, the influence of carbon and nitrogen supplements was investigated. Addition of carbon sources as substrate was found to be ineffective, while lipase activity remarkably increased by supplementation of bagasse with adequate amount of nitrogen source. Among the nitrogen supplements, urea as a suitable nitrogen source was considered; as a result the average lipolytic activity of 229.355 U/gds was achieved. In addition, various concentrations of vegetable oils including canola oil, soybean oil, olive oil and castor oil were applied. The inducing effect of vegetable oil on lipase activity was investigated. Among them, olive oil and canola oil increased lipolytic activity of lipase with an average value of 192.26 and 183.57 U/gds, respectively

Analysis of solar energy development strategies for a successful energy transition in the UAE

© 2022 The Authors. Published by MDPI AG. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://www.mdpi.com/2227-9717/10/7/1338The United Arab Emirates (UAE) is making significant progress in improving its economy by attracting tourists and trade. In the short run, however, economic activity will continue to be more based on oil, natural gas, and related industries. Rising demand for natural gas for power plants and industrial users, such as petrochemicals and steelmakers, has made the UAE a net gas importer, prompting the country to launch multibillion-dollar investments in nuclear and renewable energy. This study addresses the trend of solar energy production and consumption in the UAE. The strengths, weaknesses, opportunities, and threats (SWOT) analysis was performed on the different types of solar energy in the UAE, and some strategies were developed based on it. The SWOT analysis reveals promising strategies for the UAE’s solar energy transition that would reduce fossil fuel demand, mitigate greenhouse gas emissions through solar energy production, and transform the UAE into the carbon market centre of the Gulf Cooperation Council countries.This research received no external funding.Published onlin

Environmental aspects of the combined cooling, heating, and power (CCHP) systems: a review

© 2022 The Authors. Published by MDPI AG. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/pr10040711Expanding cities means increasing the need for energy in the residential sector. The supply of this energy must be in environmentally friendly ways; one method of meeting demand in the residential sector is the use of combined cooling, heating, and power (CCHP) systems. The current review paper shows that due to the high cost of gas and electricity, CCHP can be used in various sectors, such as hospitals and airports, to reduce energy consumption with lower environmental impacts by using renewable energy systems as the main driver. While CCHP systems are not feasible in tropical regions with high cooling demand, a solar hybrid system is a superior candidate for regions with sufficient radiation. CCHP can also be used in sectors such as wastewater treatment units, desalination systems, and hydrogen production units to improve performance and increase productivity. The carbon and water footprints of CCHP systems are discussed in detail. The main drivers for reducing carbon and water footprints are improving system components such as the combustion engine and increasing productivity by expanding the system to multi-generation systems. Finally, the carbon tax index can help reduce carbon emissions if properly used in the right context. Based on our best knowledge, there is no extensive review of the environmental aspects of CCHP systems in the literature.Published versio

Study on physico-chemical characteristics of Azad dam reservoir (Sanandaj) in order to fisheries activities

Dam reservoirs have important rules in aquaculture and fish farming in many countries. In this regard, water samples of Azad Dam reservoir (Sanandaj) were collected at five stations from July 2015 to June 2016. Then, the results of 18 physico-chemical parameters were compared with the aquaculture standards and thresholds. Results showed that thermocline and oxycline was started from June and they vanished in December. Maximum level of thermal and oxygen stratified were registered during August and June, respectively. Mean of the most physico-chemical parameters were significantly different between surface and bottom layers (T-Test, p<0.05). Mean of temperature, dissolved oxygen, total alkalinity, total hardness, pH, total suspended solid, total dissolved solid and nutrients were in range of standard threshold of different countries. As a result, based on physico-chemical parameters and with proper management decision, the dam reservoir could be considering suitable for standard pattern of aquaculture activities