Spectroscopic ellipsometry as a sensitive monitor of materials contamination

Spectroscopic ellipsometry is demonstrated to be extremely sensitive to contamination layers in the thickness range from 0.1 nm to 10 microns. In the present experiments we deposit either a thin lubricating oil (WD-40) or mineral oil continuously onto Ir, Cu, Al, Au, and V substrates from a bubbler, and monitor its thickness growth from sub-nanometer to tens of nanometers as a function of time. Re-evaporation of contaminant oils is also monitored in real-time by ellipsometry

Bi(OTf)(3)-, TfOH-, and TMSOTf-Mediated, One-Pot Epoxide Rearrangement, Addition, and Intramolecular Silyl-Modified Sakurai (ISMS) Cascade toward Dihydropyrans: Comparison of Catalysts and Role of Bi(OTf)(3)

Catalytic quantities of bismuth(III) triflate efficiently initiate the rearrangement of epoxides to aldehydes, which subsequently react with (Z)-delta-hydroxyalkenylsilanes to afford 2,6-disubstituted 3,6-dihydro-2H-pyrans. Isolated yields of desired products using Bi(OTf)(3) were compared with yields obtained when the reactions were run with TfOH and TMSOTf in the presence and absence of several additives. These studies, as well as NMR spectroscopic analyses, indicate an initial Lewis acid/base interaction between Bi(OTf)(3) and substrates providing TfOH in situ

SAMPLE ANALYSIS METHODOLOGY UTILIZNGELECTROMAGNETIC RADATION

Simultaneous use of wavelengths in at least two ranges Selected from RADIO, MICRO. FIR, IR, NIR-VIS-NUV. UV, DUV, VUV EUV, XRAY in a regression procedure to evaluate parameters in mathematical dispersion structures to model dielectric functions

Glenohumeral joint injection: a comparative study of ultrasound and fluoroscopically guided techniques before MR arthrography

To assess the variability in accuracy of contrast media introduction, leakage, required time and patient discomfort in four different centres, each using a different image-guided glenohumeral injection technique. Each centre included 25 consecutive patients. The ultrasound-guided anterior (USa) and posterior approach (USp), fluoroscopic-guided anterior (FLa) and posterior (FLp) approach were used. Number of injection attempts, effect of contrast leakage on diagnostic quality, and total room, radiologist and procedure times were measured. Pain was documented with a visual analogue scale (VAS) pain score. Access to the joint was achieved in all patients. A successful first attempt significantly occurred more often with US (94%) than with fluoroscopic guidance (72%). Leakage of contrast medium did not cause interpretative difficulties. With US guidance mean room, procedure and radiologist times were significantly shorter (p < 0.001). The USa approach was rated with the lowest pre- and post-injection VAS scores. The four image-guided injection techniques are successful in injection of contrast material into the glenohumeral joint. US-guided injections and especially the anterior approach are significantly less time consuming, more successful on the first attempt, cause less patient discomfort and obviate the need for radiation and iodine contrast

Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)1.

In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field

\u3ci\u3eIn situ\u3c/i\u3e and \u3ci\u3eex situ\u3c/i\u3e optical characterization of electro deposited magneto-optic materials

Electrodeposition is being investigated as a novel and low-cost method to prepare magneto-optic thin film and nanostructured materials. This deposition method allows precise control over thin-film properties and permits deposition of novel magnetic geometries. Multilayers and alloys can be deposited and controlled by adjusting deposition potentials and ion concentrations in the bath. Nickel/cobalt alloys have been electrodeposited from sulfamate, sulfate, and chloride solutions onto Au substrates. The optical properties were monitored in situ with a real-time spectroscopic ellipsometer measuring simultaneously at 44 wavelengths in the 410–750 nm spectral range. In situ measurements have the advantage of determining the material microstructural properties (thickness, density, and roughness) before the films are oxidized in the air ambient. Ex situ variable angle spectroscopic ellipsometry measurements were taken over the spectral range from 205 to 1000 nm

Progress in spectroscopic ellipsometry: Applications from vacuum ultraviolet to infrared

Spectroscopic ellipsometry (SE) is a noncontact and nondestructive optical technique for thin film characterization. In the past 10 yr, it has migrated from the research laboratory into the semiconductor, data storage, display, communication, and optical coating industries. The wide acceptance of SE is a result of its flexibility to measure most material types: dielectrics, semiconductors, metals, superconductors, polymers, biological coatings, and even multilayers of these materials. Measurement of anisotropic materials has also made huge strides in recent years. Traditional SE measurements cover the ultraviolet, visible, and near infrared wavelengths. This spectral range is now acquired within seconds with high accuracy due to innovative optical configurations and charge coupled device detection. In addition, commercial SE has expanded into both the vacuum ultraviolet (VUV) and midinfrared (IR). This wide spectral coverage was achieved by utilizing new optical elements and detection systems, along with UV or Fourier transform IR light sources. Modern instrumentation is now available with unprecedented flexibility promoting a new range of possible applications. For example, the VUV spectral region is capable of characterizing lithographic materials for 157 nm photolithography. The VUV also provides increased sensitivity for thin layers (e.g., gate oxides or self-assembled monolayers) and allows investigation of high-energy electronic transitions. The infrared spectral region contains information about semiconductor doping concentration, phonon absorption, and molecular bond vibrational absorptions. In this work, we review the latest progress in SE wavelength coverage. Areas of significant application in both research and industrial fields will be surveyed, with emphasis on wavelength-specific information content