208 research outputs found
The NILE Project — Advances in the Conversion of Lignocellulosic Materials into Ethanol
NILE ("New Improvements for Lignocellulosic Ethanol") was an integrated European project (2005-2010) devoted to the conversion of lignocellulosic raw materials to ethanol. The main objectives were to design novel enzymes suitable for the hydrolysis of cellulose to glucose and new yeast strains able to efficiently converting all the sugars present in lignocellulose into ethanol. The project also included testing these new developments in an integrated pilot plant and evaluating the environmental and socio-economic impacts of implementing lignocellulosic ethanol on a large scale. Two model raw materials – spruce and wheat straw – both preconditioned with similar pretreatments, were used. Several approaches were explored to improve the saccharification of these pretreated raw materials such as searching for new efficient enzymes and enzyme engineering. Various genetic engineering methods were applied to obtain stable xylose- and arabinose-fermenting Saccharomyces cerevisiae strains that tolerate the toxic compounds present in lignocellulosic hydrolysates. The pilot plant was able to treat 2 tons of dry matter per day, and hydrolysis and fermentation could be run successively or simultaneously. A global model integrating the supply chain was used to assess the performance of lignocellulosic ethanol from an economical and environmental perspective. It was found that directed evolution of a specific enzyme of the cellulolytic cocktail produced by the industrial fungus, Trichoderma reesei, and modification of the composition of this cocktail led to improvements of the enzymatic hydrolysis of pretreated raw material. These results, however, were difficult to reproduce at a large scale. A substantial increase in the ethanol conversion yield and in specific ethanol productivity was obtained through a combination of metabolic engineering of yeast strains and fermentation process development. Pilot trials confirmed the good behaviour of the yeast strains in industrial conditions as well as the suitability of lignin residues as fuels. The ethanol cost and the greenhouse gas emissions were highly dependent on the supply chain but the best performing supply chains showed environmental and economic benefits. From a global standpoint, the results showed the necessity for an optimal integration of the process to co-develop all the steps of the process and to test the improvements in a flexible pilot plant, thus allowing the comparison of various configurations and their economic and environmental impacts to be determined. <br> Le projet NILE, acronyme de "New Improvements for Lignocellulosic Ethanol", était un projet européen (2005-2010) consacré à la conversion des matières premières lignocellulosiques en éthanol. Ses principaux objectifs étaient de concevoir de nouvelles enzymes adaptées à l’hydrolyse de la cellulose en glucose et de nouvelles souches de levure capables de convertir efficacement tous les sucres présents dans la lignocellulose en éthanol. Une autre partie du projet consistait à tester ces nouveaux systèmes dans une installation pilote et à évaluer les impacts environnementaux et socio-économiques de la production et utilisation à grande échelle d’éthanol lignocellulosique. Deux matières premières modèles (l’épicéa et la paille de blé) prétraitées de façon semblable, ont été étudiées. Différentes approches ont été tentées pour améliorer la saccharification de ces matières premières, par exemple, la recherche de nouvelles enzymes efficaces ou l’ingénierie d’enzymes. Plusieurs stratégies d’ingénierie génétique ont été utilisées pour obtenir des souches stables de Saccharomyces cerevisiae capables de fermenter le xylose et l’arabinose, et de tolérer les composés toxiques présents dans les hydrolysats lignocellulosiques. L’installation pilote pouvait traiter 2 tonnes de matières sèches par jour, et l’hydrolyse et la fermentation pouvaient être menées successivement ou simultanément. Un modèle global intégrant la chaîne d’approvisionnement en matière première a servi à évaluer les performances économiques et environnementales de la production d’éthanol lignocellulosique. L’évolution dirigée d’une enzyme du cocktail cellulolytique produit par le champignon Trichoderma reesei, et la modification de la composition de ce cocktail améliorent l’hydrolyse enzymatique des matières premières prétraitées. Cependant, ces résultats n’ont pu être reproduits à grande échelle. Le rendement de conversion et la productivité spécifique en éthanol ont été sensiblement augmentés grâce à l’ingénierie métabolique des souches de levure et au développement d’un procédé optimal de fermentation. Les essais en pilote ont confirmé le bon comportement de ces souches de levure en conditions industrielles ainsi que la possibilité d’utiliser les résidus riches en lignine comme combustible. Le coût de production de l’éthanol et le bilan des émissions de gaz à effet de serre étaient très dépendants des sources d’énergie utilisées. D’un point de vue plus global, les résultats ont montré que l’optimisation du procédé nécessite de codévelopper toutes les étapes de façon intégrée et de valider les améliorations dans une installation pilote, afin notamment de pouvoir comparer différentes configurations et d’en déterminer les effets sur l’économie du procédé et ses impacts environnementaux
Effect of temperature and pH on growth and product formation of Lactococcus lactis ssp. lactis ATCC 19435 growing on maltose
Physiological and molecular characterization of yeast cultures pre‐adapted for fermentation of lignocellulosic hydrolysate.
Economically feasible bioethanol process from lignocellulose requires efficient fermentation by yeast of all sugars present in the hydrolysate. However, when exposed to lignocellulosic hydrolysate, Saccharomyces cerevisiae is challenged with a variety of inhibitors that reduce yeast viability, growth, and fermentation rate, and in addition damage cellular structures. In order to evaluate the capability of S. cerevisiae to adapt and respond to lignocellulosic hydrolysates, the physiological effect of cultivating yeast in the spruce hydrolysate was comprehensively studied by assessment of yeast performance in simultaneous saccharification and fermentation (SSF), measurement of furaldehyde reduction activity, assessment of conversion of phenolic compounds and genome‐wide transcription analysis. The yeast cultivated in spruce hydrolysate developed a rapid adaptive response to lignocellulosic hydrolysate, which significantly improved its fermentation performance in subsequent SSF experiments. The adaptation was shown to involve the induction of NADPHdependent aldehyde reductases and conversion of phenolic compounds during the fed‐batch cultivation. These properties were correlated to the expression of several genes encoding oxidoreductases, notably AAD4, ADH6, OYE2/3, and YML131w. The other most significant transcriptional changes involved genes involved in transport mechanisms, such as YHK8, FLR1, or ATR1. A large set of genes were found to be associated with transcription factors (TFs) involved in stress response (Msn2p, Msn4p, Yap1p) but also cell growth and division (Gcr4p, Ste12p, Sok2p), and these TFs were most likely controlling the response at the post‐transcriptional level
Induction of D-xylose uptake and expression of NAD(P)H-linked xylose reductase and NADP + -linked xylitol dehydrogenase in the oleaginous microalga Chlorella sorokiniana
Physiological effects of over-expressing compartment-specific components of the protein folding machinery in xylose-fermenting Saccharomyces cerevisiae
Improving simultaneous saccharification and co-fermentation of pretreated wheat straw using both enzyme and substrate feeding
<p>Abstract</p> <p>Background</p> <p>Simultaneous saccharification and co-fermentation (SSCF) has been recognized as a feasible option for ethanol production from xylose-rich lignocellulosic materials. To reach high ethanol concentration in the broth, a high content of water-insoluble solids (WIS) is needed, which creates mixing problems and, furthermore, may decrease xylose uptake. Feeding of substrate has already been proven to give a higher xylose conversion than a batch SSCF. In the current work, enzyme feeding, in addition to substrate feeding, was investigated as a means of enabling a higher WIS content with a high xylose conversion in SSCF of a xylose-rich material. A recombinant xylose-fermenting strain of <it>Saccharomyces cerevisiae </it>(TMB3400) was used for this purpose in fed-batch SSCF experiments of steam-pretreated wheat straw.</p> <p>Results</p> <p>By using both enzyme and substrate feeding, the xylose conversion in SSCF could be increased from 40% to 50% in comparison to substrate feeding only. In addition, by this design of the feeding strategy, it was possible to process a WIS content corresponding to 11% in SSCF and obtain an ethanol yield on fermentable sugars of 0.35 g g<sup>-1</sup>.</p> <p>Conclusion</p> <p>A combination of enzyme and substrate feeding was shown to enhance xylose uptake by yeast and increase overall ethanol yield in SSCF. This is conceptually important for the design of novel SSCF processes aiming at high-ethanol titers. Substrate feeding prevents viscosity from becoming too high and thereby allows a higher total amount of WIS to be added in the process. The enzyme feeding, furthermore, enables keeping the glucose concentration low, which kinetically favors xylose uptake and results in a higher xylose conversion.</p
From wheat straw to bioethanol: integrative analysis of a separate hydrolysis and co-fermentation process with implemented enzyme production
Selection of yeast strains for bioethanol production from UK seaweeds
Macroalgae (seaweeds) are a promising feedstock for the production of third generation bioethanol, since they have high carbohydrate contents, contain little or no lignin and are available in abundance. However, seaweeds typically contain a more diverse array of monomeric sugars than are commonly present in feedstocks derived from lignocellulosic material which are currently used for bioethanol production. Hence, identification of a suitable fermentative microorganism that can utilise the principal sugars released from the hydrolysis of macroalgae remains a major objective. The present study used a phenotypic microarray technique to screen 24 different yeast strains for their ability to metabolise individual monosaccharides commonly found in seaweeds, as well as hydrolysates following an acid pre-treatment of five native UK seaweed species (Laminaria digitata, Fucus serratus, Chondrus crispus, Palmaria palmata and Ulva lactuca). Five strains of yeast (three Saccharomyces spp, one Pichia sp and one Candida sp) were selected and subsequently evaluated for bioethanol production during fermentation of the hydrolysates. Four out of the five selected strains converted these monomeric sugars into bioethanol, with the highest ethanol yield (13 g L−1) resulting from a fermentation using C. crispus hydrolysate with Saccharomyces cerevisiae YPS128. This study demonstrated the novel application of a phenotypic microarray technique to screen for yeast capable of metabolising sugars present in seaweed hydrolysates; however, metabolic activity did not always imply fermentative production of ethanol
Chemical and structural changes of pretreated empty fruit bunch (EFB) in ionic liquid-cellulase compatible system for fermentability to bioethanol
The pretreatment of empty fruit bunch (EFB) was conducted using an integrated system of IL and cellulases (IL-E), with simultaneous fermentation in one vessel. The cellulase mixture (PKC-Cel) was derived from Trichoderma reesei by solid-state fermentation. Choline acetate [Cho]OAc was utilized for the pretreatment due to its biocompatibility and biodegradability. The treated EFB and its hydrolysate were characterized by the Fourier transform infrared spectroscopy, scanning electron microscopy, and chemical analysis. The results showed that there were significant structural changes in EFB after the treatment in IL-E system. The sugar yield after enzymatic hydrolysis by the PKC-Cel was increased from 0.058 g/g of EFB in the crude sample (untreated) to 0.283 and 0.62 ± 06 g/g in IL-E system after 24 and 48 h of treatment, respectively. The EFB hydrolysate showed the eligibility for ethanol production without any supplements where ethanol yield was 0.275 g ethanol/g EFB in the presence of the IL, while lower yield obtained without IL-pretreatment. Moreover, it was demonstrated that furfural and phenolic compounds were not at the level of suppressing the fermentation process
Adaptation of Scheffersomyces stipitis to hardwood spent sulfite liquor by evolutionary engineering
Hardwood spent sulfite liquor (HSSL) is a by-product of acid sulfite pulping process that is rich in
xylose, a monosaccharide that can be fermented to ethanol by Scheffersomyces stipitis. However, HSSL also contains
acetic acid and lignosulfonates that are inhibitory compounds of yeast growth. The main objective of this study
was the use of an evolutionary engineering strategy to obtain variants of S. stipitis with increased tolerance to HSSL
inhibitors while maintaining the ability to ferment xylose to ethanol
- …